Useful for navio2 or px4_raspberrypi when attaching a secondary (UART) GPS through one of the USB ports; the default navio2 onboard GPS is running on spi.
Example usage:
gps start -d /dev/spidev0.0 -i spi -e /dev/ttyACM0 -j uart -p ubx
Adds automatic control of more light types via UAVCAN. Publishes
commands for beacon, strobe, nav, and landings lights. Each is
automatically controlled based on arming state and this behavior is
configurable per light type via params. For example, nav lights can be
set to be always on while beacons turn on when the system is prearmed
and strobes turn on only when armed.
Fixes
src/drivers/dshot/dshot.cpp:1408:9: error: declaration of
'struct DShotOutput::custom_command(int, char**)::Command' shadows
a previous local [-Werror=shadow]
benefits:
- read & validate product name
- sensor configuration with the output we want (raw distance data)
- get signal quality
Protocol description: http://support.lightware.co.za/sf20/#/commands
Other Lightware sensors can easily be moved over to that as well.
Forwards messages on the gps_inject_data uORB topic as
uavcan::equipment::gnss::RTCMStream messages on the UAVCAN bus. This
enables differential/RTK GPS over UAVCAN to work.
Tested with CubePilot Cube Orange, Here+ base and Here3 rover.
Signed-off-by: Alex Mikhalev <alexmikhalevalex@gmail.com>
- drivers/tone_alarm: move to ModuleBase and purge CDev (/dev/tone_alarm0)
- drivers/tone_alarm: only run on tune_control publication (or scheduled note) rather than continuously
- drivers/tone_alarm: use HRT to schedule tone stop (prevents potential disruption)
- msg/tune_control: add tune_id numbering
- systemcmds/tune_control: add "error" special case tune_id
- move all tune_control publication to new uORB::PublicationQueued<>
- start tone_alarm immediately after board defaults are loaded to fix potential startup issues
- for SITL (or other boards with no TONE output) print common messages (startup, error, etc)
I observed stack overflows when executing `uavcan params list`, so the
stack size probably needs to be increased.
Signed-off-by: Alex Mikhalev <alexmikhalevalex@gmail.com>
- new sensors work item that subscribes to N x sensor_gps and publishes vehicle_gps_position
- blending is now configurable with SENS_GPS_MASK and SENS_GPS_TAU
Co-authored-by: Jacob Crabill <jacob@volans-i.com>
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
- Nuttx only process all suspend & resume scheduling notes when top is running, otherwise only track IDLE
- convert cpuload and print load to c++
- delete unused fields from print_load struct
- update hrt_store_absolute_time (previous unused)
bresch