* Acquire control until expected id s are reported
* require an updated message and allow release in case early exit of FlightTask
* FlightTask Gimbal: acquiring logic simplification suggestion
* formatting
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
* RoverAttitudeSetpoint - whitespace
* Format RoverAttitudeStatus.msg for consistency
* Format RoverPositionSetpoint.msg for consistency
* Format msg/RoverRateSetpoint.msg for consistency
* Format msg/RoverRateStatus.msg for consistency
* Format msg/RoverSpeedSetpoint.msg for consistency
* Reformat RoverSpeedStatus.msg for consistency
* Fix formatting of pid_yaw_rate_integral field
* Fix formatting in RoverSteeringSetpoint.msg
* Fix formatting in RoverThrottleSetpoint.msg
* Apply suggestions from code review
* switched instructions for clodning Micro-XRCE-DDS from v2.4.2 to v2.4.3 since v2.4.2 references a bad fast-dds tag that doesnt build
* reverted uxrce instructions changes from docs/ko docs/uk and docs/zh sin
ce they are generated automatically and should not be changed manually
* dronecan: esc: change UAVCAN_ESC_IFACE to 2 to default to only outputting on CAN2
* revert param default and update docs
* Subedit
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Added overloaded get_log_time util for fractional seconds
* Added write_info implementation for double info types
* Save boot time to .ulg via info message key boot_time_utc
* Changed time type from double to uint64_t, formatted
* Fixing get_log_time function doc
* platforms: Serial new dedicated writeBlocking method
* finish writeBlocking()
* add back fsync
* updated posix, added string constant for port not open error
* format
* fix build
* remove fsync
* actually remove fsync
* remove fsync from write
* review feedback
---------
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* serial: nuttx: revert tcdrain back to fsync
* serial: do not print error on EAGAIN
---------
Co-authored-by: Alexander Lerach <alexander@auterion.com>
This was apparently added 10 years ago to store metadata of UAVCAN components within the PX4 binary. The parameters in the xml are mostly early UAVCAN ESC parameters that are presumably out of date and not used. Also it does not scale to maintain metadata for all the possible UAVCAN components and it causes confusion when users read the metadata documentation because these parameters are not available in PX4. That's why I suggest to remove it.
* Add new INS driver sbgECom
Implement sbgECom messages handling to provide IMU sensors, GNSS and EKF data to the autopilot
Be able to parametrize the serial port, baudrate and the communicating mode
Clone sbgECom library only if sbgecom support is enabled and apply a patch
Be able to send SBG Systems INS settings in several ways when starting sbgecom driver
* Fix sensor airspeed simulator units
* Fix HIGHRES_IMU pressure unit
* Allow HIGHRES_IMU to support 4 IMUs
* sbgECom: Add documentation
* Use submodule instead of fetching sbgECom using CMake
* Remove patch strategy
* Fix dates
* Remove patch file
* Update SBG dev type ID
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
---------
Co-authored-by: Samuel Toledano <samuel.toledano@sbg-systems.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* Update dev_env_windows_wsl.md
Add info about enabling broadcasting or streaming to work with PX4 SITL on WSL and QGC on Windows.
* Update dev_env_windows_wsl.md
Fix links
* Update dev_env_windows_wsl.md
moved troubleshooting section at the bottom of WSL2<>Windows section.
* Move under troubleshooting
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
- The velocity constraint gets set from multiple places e.g. Position slow knob and altitude related slow down. Depending on the execution order it was overwritten with a higher value again not obeying a stricter limit.
- The slowdown used valocities as inputs instead of the ratio of available altitude.
In an effort to reduce configuration space.
I've not seen use for this option.
If a pilot flies manually in position mode he has some visual reference of the vehicle and can do better than an autonomous mode without position reference.
Also by now we have nudging in Descend mode so the pilot can still give input and the only difference is it automatically goes down instead of the pilot having to descend by stick to land.
* Create a dummy BAHRS driver
* Resolve compilation
* Switch back to cpp, fix compilation
* Create module.yaml
* Implement required module APIs and open serial port
* Revise info and error messages
* Poll serial port
* Push received bytes into the ring buffer
* Process data buffer (1)
* Process data buffer (2)
* Process data buffer (3)
* Process data buffer (4)
* Process data buffer (5)
* Process data buffer (6)
* Implement and use initialize() and deinitialize() methods
* Implement print_usage() and print_status()
* Collect all config constants in a class
* Put info about next found message into a class
* Print CRC failure count
* Remove unneeded print
* Add comments
* Disable EKF2, advertise vehicle attitude
* Decode and publish BAHRS signals (1)
* Run the driver as an additional source of sensor signals
* Add tiny noise to baro-inertial pressure signal
* Fix the sensor ID
* Add copyrights
* Fix formatting
* Remove redundant newline character
* Fix long parameter name
* Fix findings (1)
* Fix finding (2)
* Fix formatting
* Fix the timeout value
* Remove aliases
* Fix copyright
* Fix indent
* Comply with naming convention
* Rework comparison to false
* Reduce nesting (1)
* Reduce nesting (2)
* Reduce nesting (3)
* Fix BAHRS sensor ID
Matthias Grob