-add new NAVIGATION_STATE_ALTITUDE_VOYAGER
-this mode does require manual control to enter
-but you can disable the manual control loss failsafe to continue
flying in case of manual control loss
-for MC: in throttle and yaw are controlled like in Altitude mode,
the tilt is controlled via integrated rate input (similar to Acro,
but with tilt limit)
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
* Acquire control until expected id s are reported
* require an updated message and allow release in case early exit of FlightTask
* FlightTask Gimbal: acquiring logic simplification suggestion
* formatting
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
* RoverAttitudeSetpoint - whitespace
* Format RoverAttitudeStatus.msg for consistency
* Format RoverPositionSetpoint.msg for consistency
* Format msg/RoverRateSetpoint.msg for consistency
* Format msg/RoverRateStatus.msg for consistency
* Format msg/RoverSpeedSetpoint.msg for consistency
* Reformat RoverSpeedStatus.msg for consistency
* Fix formatting of pid_yaw_rate_integral field
* Fix formatting in RoverSteeringSetpoint.msg
* Fix formatting in RoverThrottleSetpoint.msg
* Apply suggestions from code review
* switched instructions for clodning Micro-XRCE-DDS from v2.4.2 to v2.4.3 since v2.4.2 references a bad fast-dds tag that doesnt build
* reverted uxrce instructions changes from docs/ko docs/uk and docs/zh sin
ce they are generated automatically and should not be changed manually
* dronecan: esc: change UAVCAN_ESC_IFACE to 2 to default to only outputting on CAN2
* revert param default and update docs
* Subedit
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Added overloaded get_log_time util for fractional seconds
* Added write_info implementation for double info types
* Save boot time to .ulg via info message key boot_time_utc
* Changed time type from double to uint64_t, formatted
* Fixing get_log_time function doc
* platforms: Serial new dedicated writeBlocking method
* finish writeBlocking()
* add back fsync
* updated posix, added string constant for port not open error
* format
* fix build
* remove fsync
* actually remove fsync
* remove fsync from write
* review feedback
---------
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* serial: nuttx: revert tcdrain back to fsync
* serial: do not print error on EAGAIN
---------
Co-authored-by: Alexander Lerach <alexander@auterion.com>
This was apparently added 10 years ago to store metadata of UAVCAN components within the PX4 binary. The parameters in the xml are mostly early UAVCAN ESC parameters that are presumably out of date and not used. Also it does not scale to maintain metadata for all the possible UAVCAN components and it causes confusion when users read the metadata documentation because these parameters are not available in PX4. That's why I suggest to remove it.
* Add new INS driver sbgECom
Implement sbgECom messages handling to provide IMU sensors, GNSS and EKF data to the autopilot
Be able to parametrize the serial port, baudrate and the communicating mode
Clone sbgECom library only if sbgecom support is enabled and apply a patch
Be able to send SBG Systems INS settings in several ways when starting sbgecom driver
* Fix sensor airspeed simulator units
* Fix HIGHRES_IMU pressure unit
* Allow HIGHRES_IMU to support 4 IMUs
* sbgECom: Add documentation
* Use submodule instead of fetching sbgECom using CMake
* Remove patch strategy
* Fix dates
* Remove patch file
* Update SBG dev type ID
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
---------
Co-authored-by: Samuel Toledano <samuel.toledano@sbg-systems.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
Jacob Dahl