previous to this
09d79b221f
set `esc_online_flags` e.g. for UAVCAN ESCs which specific one is online and that then got compared to a mask where the first `esc_count` bits were set.
So if only ESC 5 is mapped and online you get the message "ESC 156 offline" because `esc_online_flags = 0b1000` gets compared to `online_bitmask = 0b1` based on `esc_count = 1` and the motor index is `esc[0].actuator_function = 0` wrapped using `0 - actuator_motors_s::ACTUATOR_FUNCTION_MOTOR1 + 1 = 156`.
* Changed the healthFailure call in the PowerChecks to ensure that no value above the low_error_threshold or below the high_error_threshold is reported in AMC
* fix format
* made _latest_low_failure and _latest_low_failure member variables. Only update them when hystersis state changes from false to true.
* rc_update: remove 1% deadzone for all channels
this should be handled higher level.
* Remove all references to the RC{n}_DZ parameters
Regular expression: RC.{0,2}_DZ
---------
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
This allows external modes to individually check if they are flagged as
invalid/unresponsive.
Previously this was done only based on whether or not ArmingCheckRequest
was received, which does not work when multiple modes are running.
based on the message timestamp.
Previously it was possible to run into the following case:
- 2 external modes are registered (running inside the same ROS node)
- they time out due to the micro xrce agent being blocked for some reason
- PX4 removes them
- the latest arming check replies still arrive to PX4
- the application restarts
- the first mode gets registered
- PX4 handles the previous arming check reply, and clears
waiting_for_first_response, which reduces the timeout
- the second mode registers and as part of that checks for message
compatibility. This takes ~1s, triggering a timeout of the first mode
To separate accuracy requirements for VTOL hover and cruise.
- global_position_relaxed refers to having a valid horizontal velocity aid source
in the estimator and a set global reference position, but poses no requirements
on the accuracy of the provided position estimate.
- Auto flight modes Mission, Loiter and RTL, while in fixed-wing mode,
only require the relaxed global position going forward
- COM_POS_FS_EPH is thus no longer used on fixed-wing vehicles (resp. VTOL in FW)
- rename failsafe_flags.local_position_accuracy_low to failsafe_flags.position_accuracy_low
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com>
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Silvan <silvan@auterion.com>
To make sure QGC also shows a box and reads out for "low battery"
and make events and mavlink_log reports consistent.
Low - Critical
Critical - Critical
Emergency - Emergency
We had a setup where the voltage was right at the threshold and the check
toggled continuously.
It still triggers immediately, and then keeps for 15 seconds
* add optical flow arming check
* removed deprecated mavlink_log_critical
* change SYS_HAS_NUM_OF description, keep max sensor at 1 since multiple instances are currently not support.
* restructure if/else blocks
ttechnick