Daniel Agar
4defb8e85c
[BACKPORT] boards: px4/fmu-{v5*,v6*} add dedicated rover board variants (eg px4_fmu-v6x_rover)
2024-04-30 06:24:29 -07:00
Vincent Poon
f75a92d199
Change FMU-v6x REV 6 IMU Order
...
Change IMU Order, make adis16470 in 1st priority.
2024-03-19 05:35:30 +13:00
David Sidrane
f6ec71d39f
px4_fmu-v6x:Add Sensor set 8
2024-03-19 05:35:30 +13:00
David Sidrane
23d8b3cf25
px4_fmu-v6x:rc.board_sensors Use BOARD_HAS_HW_SPLIT_VERSIONING
2024-03-19 05:35:30 +13:00
David Sidrane
0c1b5e88c5
px4_fmu-v6x:HAVE_PM2 set by PX4_MFT_PM2 in manifest
2024-03-19 05:35:30 +13:00
David Sidrane
a2db688f4b
px4_fmu_v6x:Use common PAB manifest
2024-03-19 05:35:30 +13:00
David Sidrane
4339833696
px4_fmu-v6x:Use BOARD_HAS_HW_SPLIT_VERSIONING
2024-03-19 05:35:30 +13:00
David Sidrane
3691b132b2
px4_fmuv6x:Fit Rev6 Sensors
2024-03-19 05:35:30 +13:00
David Sidrane
4901edb5a4
px4_fmu-v6:Add Sensor Set Rev 6
2024-03-19 05:35:30 +13:00
David Sidrane
c5e2d9d871
px4_fmu-v6x:Rev 6 Sensors omit starting icm42688p, icm42670p, icm20649, icm20602
2024-03-19 05:35:30 +13:00
Julian Oes
454a987568
fmu-6x: fix Telem2 without flow control
...
When flow control is used together with DMA, we need to add a pulldown
to CTS. Without it, it assumes flow control and gets stuck when
CTS is not connected.
Signed-off-by: Julian Oes <julian@oes.ch >
2024-02-01 21:11:57 -05:00
Matthias Grob
beb834af2b
fmu-v6x: add crossfire UART driver
2024-01-11 11:04:51 -05:00
Julian Oes
c3ed50488f
Remove SYS_USE_IO param
...
The param is not really required anymore with the actuator
configuration. Also, when it is set to 0, RC doesn't work for some
boards which would be nice to avoid.
Signed-off-by: Julian Oes <julian@oes.ch >
2023-11-15 06:54:27 +13:00
Julian Oes
440165809a
6x: fix internal mag rotation
...
From looking at the history the BMM150 rotation was initially 0. Then,
this was changed to 6 when the intent was to only change it for Skynode.
A bit later, the rotation was changed back to 0, but only for Skynode.
This tells me that rotation 0 was correct for all 6X including Skynode
all along.
Signed-off-by: Julian Oes <julian@oes.ch >
2023-09-12 21:26:59 +12:00
Matthias Grob
70081652fe
Tools/auterion: add Skynode upload scripts ( #21842 )
2023-08-21 18:16:37 +02:00
Vincent Poon
21fb22d581
Add ADC_ADS1115 Parameter to FMUv6x Default Build
...
Adding ADC_ADS1115 Parameter to FMUv6x Default Build to allow FMUv6X user to use ADS1115 with Analog Power Modules.
2023-07-07 13:42:00 +12:00
Julian Oes
3c1bcbdee6
fmu-v6x: build battery status
...
This is required to process data from the ADS1115 ADC and enables the
params BATx_I_CHANNEL and BATx_V_CHANNEL.
Testing is required whether this actually works on Pixhawk 6X though.
Signed-off-by: Julian Oes <julian@oes.ch >
2023-07-07 13:42:00 +12:00
Julian Oes
40324b03f4
fmu-v6x: pulldown on RTS not required
...
On CTS with DMA, we need the pulldown but not on RTS.
Signed-off-by: Julian Oes <julian@oes.ch >
2023-05-05 02:49:25 -04:00
Beniamino Pozzan
9e5420bbbd
microdds_client: rename to uxrce_dds_client
...
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it >
2023-05-03 11:51:53 -07:00
Thomas Stastny
82fd2987c9
fw pos control: revert name until we delineate this module a bit more ( #21442 )
2023-04-13 17:00:04 +02:00
Beat Küng
a2ce73d39d
px4/fmu-v6x: increase BL baudrate for flashing via uart to 1500000
2023-04-13 07:46:49 +02:00
Daniel Agar
cbc067f235
boards: include INS drivers by default on PX4 FMU (eg VectorNav VN-100, VN-200, VN-300)
2023-04-06 14:06:57 -04:00
Daniel Agar
6ec2b902cc
ROMFS: only copy bootloader binary if systemcmds/bl_update included
2023-03-16 09:43:56 -04:00
Marco Räth
bdb0fe77d0
v6x: fix mag orientation for V6X009010 and V6X010010 ( #21194 )
2023-02-28 11:01:16 +01:00
Konrad
3e200bca0d
fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming.
2023-02-09 17:51:55 +01:00
FriedrichTuttas and David Sidrane
1830195d30
boards: px4_fmu-v6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS ( #20974 )
...
- https://github.com/PX4/PX4-Autopilot/issues/20762
Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com >
2023-01-21 10:19:57 -05:00
Daniel Agar
3822ef1519
boards: update all in tree bootloaders
2023-01-19 17:25:39 -05:00
Daniel Agar
45912066d2
fix copyright header year range
2023-01-14 09:16:16 -05:00
Tanja Baumann
0099523710
v6x: fix IMU rotations for V6X009010 and V6X010010 ( #20901 )
...
And add V6X000010 (pixhawk base board)
2023-01-13 14:09:35 +01:00
Daniel Agar
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
Daniel Agar
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
bresch
14bf04b9a4
SIH: add to px4_fmu-v5_default and auto start GPS sim driver
...
- add simulator kconfig dependencies
- exclude SIH (+deps) where sufficient flash isn't available
2023-01-04 16:26:15 -05:00
JaeyoungLim and Silvan Fuhrer
21e88f64b4
Add new fixed wing rate control module (fw_rate_control)
...
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control
Co-authored-by: Silvan Fuhrer <silvan@auterion.com >
2023-01-04 11:14:00 -05:00
Daniel Agar
40e3503c39
boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration)
2022-12-29 12:50:37 -05:00
Daniel Agar
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
Daniel Agar
c2f15f5957
boards: update all px4boards (make all_px4_savedefconfig)
2022-12-29 12:50:37 -05:00
Daniel Agar
f2cd7667dc
systemcmds/bsondump: new command line utility (extracted from parameters)
2022-12-21 10:14:00 -05:00
Peter van der Perk
b8e07cc52c
Fix Ethernet Socket Defaults
2022-12-19 13:24:55 -05:00
tanja
e5255b173a
v6x: use param SENS_INT_BARO_EN to start internal bmp388
2022-12-19 08:50:31 +01:00
tanja
987de56af2
v6x: rev10 has second PM
2022-12-19 08:50:31 +01:00
tanja
09039faf0a
v6x: change bootloader UART7 to UART5
2022-12-19 08:50:31 +01:00
Tanja Baumann
d75e61eef6
v6x: fix rc.board_sensors ver command ( #20763 )
2022-12-14 07:53:12 +01:00
tanja
ba344231d2
v6x: configure SPI busses for board 0x010
2022-12-13 08:09:15 +01:00
tanja
ed0f602ce8
v6x: Adapt sensor set for board 0x010 upstream
2022-12-13 08:09:15 +01:00
tanja
aec4b93527
v6x: Add EXT2 instance on ttyS3
2022-12-13 08:09:15 +01:00
David Sidrane
9faa8e23e8
NuttX Upgrade CONFIG_LIB_BOARDCTL->CONFIG_BOARDCTL
2022-11-22 14:30:08 -05:00
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com >
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com >
Co-authored-by: alexklimaj <alex@arkelectron.com >
2022-11-20 20:28:07 -05:00
Igor Mišić
815eed2c6d
mtd: add support for extended HW revision
2022-11-10 07:45:44 +01:00
Daniel Agar
dac9f0dac4
boards: px4_fmu-v6x_default include systemcmds/gpio
2022-11-07 17:10:47 -05:00
Daniel Agar
cea185268e
msg ROS2 compatibility, microdds_client improvements (timesync, reduced code size, added topics, etc), fastrtps purge
...
- update all msgs to be directly compatible with ROS2
- microdds_client improvements
- timesync
- reduced code size
- add to most default builds if we can afford it
- lots of other little changes
- purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
2022-10-19 19:36:47 -04:00