39ce201efe
TAP:Fix build to use correct ROMFS
2016-07-13 20:19:05 +02:00
3ed8b735c2
mavlink: only warn once if broadcast fails
...
This fixes the issue where the console was spammed if a broadcast failed
after a connection had previously been established.
2016-07-13 19:40:59 +02:00
399d4ef833
sensors: only poll on first gyro for now
...
This fixes a bug with following setup:
- two (or N > 1) connected gyros
- ekf2 enabled
In this case, sensors would publish with the combined rate of the gyros,
but with N following messages having the same gyro data & timestamp.
Apparently ekf2 cannot handle this, the other estimators can.
We may want to rethink what the proper solution is here.
2016-07-13 14:35:03 +02:00
eda2915f0b
mavlink: whitespace fix
2016-07-13 10:10:45 +02:00
d9343fa925
mavlink: use new copy_if_updated interface
2016-07-13 10:10:45 +02:00
8345a0368b
mavlink: add function to copy only if updated
...
The MavlinkOrbSubscription only had an interface to either always copy
or copy based on a timestamp. This commit adds a copy interface if the
topic has been updated.
2016-07-13 10:10:45 +02:00
8ded6a58ab
mavlink_log: enable queueing
...
We don't want to drop messages if possible for mavlink log messages, so
let's use the orb queueing.
2016-07-13 10:10:45 +02:00
314ee6b7e0
commander: remove some if confusion
...
This is a try to simplify the if statements a bit. Also, a check of
new_arming_state which was impossible, is removed.
2016-07-13 10:10:45 +02:00
631ce1fc55
commander: proper arguments for preflight check
2016-07-13 10:10:45 +02:00
af8cd3f880
correctly scale and trim outputs in IO
2016-07-13 09:29:13 +02:00
13905c2480
px4io driver: send roll, pitch and yaw scale parameter values to io
...
Signed-off-by: Roman <bapstr@ethz.ch >
2016-07-13 09:29:12 +02:00
08bbd6dbfa
px4iofirmware: added scale parameters for roll, pitch and yaw
...
since pure manual control for fixed wings in handled on the io side
the scale parameters for roll, pitch and yaw had to be introduced there
as well.
Signed-off-by: Roman <bapstr@ethz.ch >
2016-07-13 09:29:12 +02:00
71e2a43790
consider scale parameters in rc calibration code
2016-07-13 09:29:12 +02:00
f0dd5a103c
allow scaling controls in full manual mode for fixed wings
2016-07-13 09:29:12 +02:00
784883af22
added parameters to allow scaling controls in full manual mode
...
for fixed wings
2016-07-13 09:29:12 +02:00
7718343b27
fix the function of disabling safety switch ( #5031 )
2016-07-12 23:43:17 +02:00
de14418e93
fw_pos_ctrl_l1 var naming consistency and effc++
2016-07-12 23:40:39 +02:00
59b4350aa0
implement MAV_CMD_NAV_LOITER_TO_ALT and general mission cleanup
2016-07-12 23:36:05 +02:00
7419151314
Update EKF2 replay timestamp handling
2016-07-12 22:17:22 +02:00
817f695297
Change to LPE terrain model to account for velocity scaling. ( #5027 )
2016-07-11 16:02:39 -04:00
a740d80a20
Mag voter: Be more forgiving on load changes
2016-07-11 15:16:35 +02:00
4fa2c54485
Mocap timestamp cleanup ( #5021 )
2016-07-11 12:46:29 +02:00
c9652fd42a
logger: update set of default topics to match functionality of sdlog2
...
logging rate with these topics: ~50KB/s
The rates may need to be adjusted
2016-07-11 10:04:44 +02:00
4ec9e53deb
param SYS_LOGGER: remove experimental for new logger
...
It's ready to be used!
2016-07-11 10:03:02 +02:00
80134d2b7d
IR-LOCK: rework driver (from jschall) ( #5024 )
...
* irlock: change output format to tangent of angles
* irlock: put all targets in single struct
* irlock: eliminate tanf function in constant
2016-07-11 09:05:29 +02:00
71d150f6ec
MAVLink app: Fix rate handling
2016-07-10 17:05:33 +02:00
c7130081cc
Update ECL
2016-07-10 16:33:07 +02:00
02b3adc4a7
Update DriverFramework
2016-07-10 16:32:59 +02:00
18330f7ab7
Move __STDC_FORMAT_MACROS to build system
...
__STDC_FORMAT_MACROS changes the behavior of inttypes.h to allow
defining format macros for printf-like functions. It needs to be defined
before any include is done, otherwise due to include chains and header
guards it may not take effect.
Instead of having to define it everywhere it is used, move the define to the
build system. Also update ecl and DriverFramework submodules to deal with the
changed definitions.
2016-07-10 16:31:36 +02:00
d2194d787f
Refactored Mavlink stream configuration ( #5015 )
...
Streams ordered same way in all modes.
2016-07-10 16:22:22 +02:00
f39d284193
Update vision fields for attitude_estimator_ekf
2016-07-10 14:21:56 +02:00
7601788c43
INAV: clean up vision timestamps
2016-07-10 12:44:00 +02:00
8b3045baa2
MAVLink: clean up vision timestamps
2016-07-10 12:43:47 +02:00
c0a406b81f
LPE: Clean up vision timestamps
2016-07-10 12:43:34 +02:00
826eaed2ee
EKF2: Clean up vision timestamps
2016-07-10 12:43:21 +02:00
4f875560b7
Att Q Estimator: New vision timestamp
2016-07-10 12:43:10 +02:00
19b56c1574
Use timestamp received from companion computer as timestamp_boot
2016-07-10 12:29:19 +02:00
5bd574dd05
Fixed timestamp synchronization
2016-07-10 12:29:19 +02:00
f69e9a3d37
Fixed VISION_POSITION_ESTIMATE.usec
...
Fixed units to be microseconds and not milliseconds.
2016-07-10 12:29:19 +02:00
a23785842c
tap-v1 Uses New PWM LED driver structure
2016-07-10 11:46:47 +02:00
ea4d9a34fd
mindpx-v2 Uses New PWM LED driver structure
2016-07-10 11:46:47 +02:00
a36f392b58
Rework PWM LED Driver
2016-07-10 11:46:47 +02:00
da96144e80
Added Power button and cleanup sdio
2016-07-10 11:46:47 +02:00
3c11c0d8d8
Adds Calibration Support for RPi2 and Navio2 ( #4999 )
2016-07-07 22:38:17 +02:00
2317589950
fixing the publishing of the triggering stamps ( #5005 )
2016-07-07 16:50:46 +02:00
e86c1851a7
Mag fusion update to ECL
2016-07-07 16:49:28 +02:00
ddba274496
sdlog2: fix poll_counter that I broke earlier
2016-07-07 16:48:27 +02:00
544ea72d4c
Snapdragon: set CPUs scaling to performance mode
...
Sdlog2 misses least updates when the CPU scaling governor is set at
maximum performance. This is not optimal to save power but the best
effort until there is a RT patched kernel on Snapdragon.
2016-07-07 16:48:27 +02:00
03dbcf5464
sdlog2: don't forget to copy after poll
...
The previous changes broke sdlog2 on NuttX because no orb_copy was
called after polling in the case when sdlog2 was not actually logging.
2016-07-07 16:48:27 +02:00
772dc302b6
sdlog2: raise min write size back
...
Turns out in practice there was not really a difference, so there was
no reason to change it.
2016-07-07 16:48:27 +02:00
David Sidrane