fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-05-02 05:04:08 +08:00
Code Issues Packages Projects Releases Wiki Activity
40,426 Commits 852 Branches 161 Tags
Commit Graph

24614 Commits

Author SHA1 Message Date
Silvan Fuhrer
0950bb81ab ControlAllocation: update normalization scale only if matrix updated is forced 
The forced flag is used to distinguish between updates due to a configuration
(parameter) change (only enabled when disarmed), and matrix updates due to motor
tilt change. Only update the normalization scale if the forced flag is true, and
use a tilt angle of vertical position for it to have the scales tilt-invariant.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-01-19 08:22:12 +01:00
CUAVmengxiao
258a563dd5 barometer: Add ICP10100 and ICP1011 2022-01-18 19:14:40 -05:00
Daniel Agar
dd6b7fa98f sensors: switch status PX4_INFO -> PX4_INFO_RAW 2022-01-18 15:00:18 -05:00
Daniel Agar
b1d2a0cc4e sensors: simplify timestamp data validator handling 2022-01-18 14:57:18 -05:00
bresch
953c90d3a6 failure detector: change imbalanced propeller metric 
Use standard deviations instead of variances to get a linear metric
 2022-01-18 12:24:35 -05:00
bresch
408cf011b2 failure detector: fix dt computation 2022-01-18 12:24:35 -05:00
Daniel Agar
548b7d5ece sensors/vehicle_imu: on calibration change don't resume in flight calibration learning immediately 2022-01-18 11:22:41 -05:00
Daniel Agar
ece09064c4 parameters: perform verification pass twice 
- on NuttX with MTD storage this is to ensure we are verifying what's
actually stored on ramtron or eeprom, not just what's cached by bchlib
 2022-01-18 09:47:28 -05:00
alexklimaj
cdb6a437a0 Fix UAVCAN beep not started 2022-01-17 21:49:53 -05:00
PX4 BuildBot
0bb9cce1ce Update submodule mavlink to latest Tue Jan 18 00:39:07 UTC 2022 
- mavlink in PX4/Firmware (37e04f56da3916dcb518eeba66b0888db1cd8c32): 75204adad2
    - mavlink current upstream: 3d8092006e
    - Changes: 75204adad2...3d8092006e

    3d809200 2022-01-14 Hamish Willee - MAV_PROTOCOL_CAPABILITY_FLIGHT_INFORMATION - mark as reserved capability (#1775)
68ff649f 2022-01-13 Hamish Willee - MAV_PROTOCOL_CAPABILITY_MISSION_FLOAT - deprecate (#1768)
ae531d97 2022-01-13 Peter Barker - Move "external" dialects to be normal dialects (#1761)
00a3f8ed 2022-01-12 Julian Oes - Revert "Delete unused cmake tree (#1760)" (#1782)
aa0764bd 2022-01-12 Hamish Willee - MAV_PROTOCOL_CAPABILITY_PARAM_UNION - rename/reserved (#1771)
c3b46620 2022-01-12 Hamish Willee - Update mavlink_udp.c example readme to use mavlink 2 (#1780)
0449a5ec 2022-01-12 Tatsuya Yamaguchi - add extended sensor status bits to MAVLink UDP example (#1778)
fc3539e1 2022-01-10 Josh Henderson - ardupilotmega: Sync to ArduPilot downstream 10-JAN-2022 (#1777)
27395aa7 2022-01-06 Julian Oes - pymavlink: update submodule to latest master (#1776)
2180611b 2022-01-06 Hamish Willee - MAV_WINCH_STATUS_CLUTCH_ENGAGED: Winch clutch is engaged allowing motor to move freely
7c6f104f 2022-01-05 Jacob Dahl - Extend WINCH_STATUS_FLAG and WINCH_ACTION (#1766)
dcb44e75 2022-01-06 Hamish Willee - Delete unused cmake tree (#1760)
5b8bec5b 2022-01-05 Hamish Willee - common.xml: AUTOTUNE_AXIS_YAW - fix value to correct one for bitmask (#1767)
 2022-01-17 21:36:02 -05:00
Daniel Agar
2fb82789fe lib/wind_estimator: pass q_att as const reference 2022-01-17 16:59:28 -05:00
Silvan Fuhrer
0ce44cebb7 WindEstimator: use vehicle heading instead of ground course for initialisation 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-01-14 17:42:01 -05:00
Silvan Fuhrer
1a4b2b37bb AirspeedValidator: remove unused variable _tas_gate 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-01-14 17:42:01 -05:00
Thomas Stastny
13c36155ce fw_pos_ctrl: allow npfg to operate without wind estimate, dont switch controllers 2022-01-14 22:05:53 +01:00
Thomas Stastny
082e320191 integrate optional NPFG library for wind-aware fixed-wing guidance 2022-01-14 22:05:53 +01:00
Beat Küng
66cbbf9f2e control_allocator: use 'bidirectional' to clarify reversible motors 2022-01-14 12:18:29 -05:00
Beat Küng
9ca58f5e97 actuator outputs: always add reverse range param 
and remove the possibility to set min > max to reverse.

Initially the idea was to add the checkbox on the UI side, to avoid adding
another param, but I don't think I'll go through the extra effort on the
QGC side.
 2022-01-14 12:18:29 -05:00
Daniel Agar
98a9748bb8 drivers/dshot: use uORB::PublicationMulti for ORB_ID(esc_status) 
- there can be multiple different outupt modules publishing esc_status (eg dshot & uavcan)
 2022-01-14 12:17:49 -05:00
Daniel Agar
81ecd130fc uavcan: ESC publish esc_status in callback instead of timer 
- this ensures every ESC status gets published with minimal latency
 - also prevents publishing ORB_ID(esc_status) when there's no actual
data (bug)
 2022-01-14 12:17:49 -05:00
Roman Bapst
dc6067ed12 Update src/modules/fw_att_control/fw_att_control_params.c 
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
 2022-01-14 16:34:44 +03:00
RomanBapst
34bb671a73 improve parameter descriptions for fw maximum/minimum roll/pitch angles 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2022-01-14 16:34:44 +03:00
RomanBapst
555ee371e8 FixedWingPositionControl: consistently use the same roll and pitch angle 
limits for autonomous and semi-autonomous modes (altitude & position control)

Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2022-01-14 16:34:44 +03:00
Thomas Stastny
f8c2ee73db handle line segment termination in navigator 
- if following line segment (fixed-wing position control) switch waypoint when in acceptance radius OR passed the second waypoint. this handles the case of being beyond the second waypoint but not within the acceptance radius without the need to fly back to the waypoint (e.g. after a loiter up to waypoint alt)
- sync navigator and fw pos ctrl waypoint acceptance altitude
 2022-01-13 13:43:02 +01:00
Claudio Micheli
8a01135a93 Commander: more changes to use events with escs and battery failures 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2022-01-13 08:40:34 +01:00
Claudio Micheli
d122513197 extend support for Battery status message 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2022-01-13 08:40:34 +01:00
Daniel Agar
bb1177d504 sensor_calibration: refactor and centralize calibration slot logic 
- centralize logic for selecting a preferred calibration slot
   - automatically use existing calibration slot if it exists, otherwise
find first available slot, with a preference for a requested index
 - existing commander calibration methods rewrite all calibration slots
to match current sensor ordering
 2022-01-12 16:16:26 -05:00
alexklimaj
d1304e1ceb Add CANNODE_GPS_RTCM 2022-01-12 15:30:38 -05:00
Silvan Fuhrer
3cd1e0ce19 MCLandDetector: clean up logic for ground effect 
Before: in_ground_effect was always true with the default settings (LNDMC_ALT_GND =-1)
 and when a distance sensor was present with valid data.
Now: default of LNDMC_ALT_GND is set to 2m by default, and if set to a negative value
then in_ground_effect is never set to true

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-01-12 18:41:16 +01:00
Matthias Grob
443406ea2b FlightTaskAuto: use longerThan() when possible in vector calculations 2022-01-12 15:12:24 +01:00
bresch
4fc7348582 mpc: leave room for altitude error control during descent and descent 
Since the same parameter is used to generate the trajectory and to
saturate the controller, there is no additional space for the output of
the position controller once it is filled with the feedforward, letting
the altitude grow uncontrolled.
 2022-01-12 13:33:48 +01:00
bresch
ea7d2334c9 mpc: add parameter for ascent/descent speed in auto modes 2022-01-12 13:33:48 +01:00
Daniel Agar
2eec7842ae sensors/vehicle_imu: fix SENS_IMU_AUTOCAL saving logic 
- on cycles that don't check for updated calibraton (estimated bias) we
check if there's anything valid to save (when disarmed)
 2022-01-11 11:47:02 -05:00
romain-chiap
4e06b40e2b
sih: add tailsitter support, disable UAVCAN 2022-01-11 08:29:19 +01:00
Julian Oes
b3d830dd11 Mantis: move power off tune to commander 
This way we don't allocate inside the interrupt context.
 2022-01-10 23:04:10 -05:00
Julian Oes
73044c51f9 vmount: only send CONFIGURE cmd if type changes 
We don't always have to send MOUNT_CONFIGURE but really only when the
control data type actually changes.
 2022-01-10 23:04:10 -05:00
Julian Oes
22180a2639 mavlink: make range params optional 
If there is no range sensor compiled in, these two params do not seem to
be available. Hence, we need to make them optional.
 2022-01-10 23:04:10 -05:00
Julian Oes
b44f5b49ca Mantis: add tap_esc to Kconfig 2022-01-10 23:04:10 -05:00
Julian Oes
ca1fabf80a logger: add rate factor to slow logging down 
This is required for the Mantis to reduce the log streaming rate.
 2022-01-10 23:04:10 -05:00
Julian Oes
c2e0e09b2d commander: reduce PWM max again 
This is no longer required now.
 2022-01-10 23:04:10 -05:00
Julian Oes
e4763f15f6 Mantis: add RC hacks 
This changes the way RC is handled for the Mantis:
- The RC values are re-written when arriving over MAVLink. They are
  rescaled from 0..4095 to 1000..2000 and the channel bits added to
  separate channels. This makes the downstream handling easier.
- Gimbal pitch is moved from Aux1 to Aux2 as that should be the default.
- Aux3 and Aux4 are used for the photo and video trigger.
- The speed button is used as the FLTMODE channel and set to switch
  between POSCTL and ALTCTL.
 2022-01-10 23:04:10 -05:00
Julian Oes
9fe7a40673 manual_control: enable sending camera commands 2022-01-10 23:04:10 -05:00
Julian Oes
1754e25920 vmount: add param to use RC input for angular rate 
Until now RC input was translated to angles only. I added the param
MNT_RC_IN_MODE which allows the RC input to be used for angular rate.
 2022-01-10 23:04:10 -05:00
Julian Oes
cb15728536 Mantis: save mission in RAM 
This is using a reduced number of mission items of 1000 instead of 2000
in order to fit in RAM.
 2022-01-10 23:04:10 -05:00
Julian Oes
880292f5d7 commander: relax RC min/max 2022-01-10 23:04:10 -05:00
Julian Oes
aa007dadee commander: fix emergency power off 
From what I can see the CONFIG_BOARDCTL_POWEROFF is not really used
anywhere, however, the BOARD_HAS_POWER_CONTROL is something that is set,
e.g. for the Mantis, to allow power off.
 2022-01-10 23:04:10 -05:00
Julian Oes
6301fa35c1 commander: add command to power off 2022-01-10 23:04:10 -05:00
Julian Oes
860b23dd17 tunes: add tune to power off 
This is used by the ATL Mantis EDU to help the user realize when the
drone is powered off.
 2022-01-10 23:04:10 -05:00
Julian Oes
a21fefda48 tune_control: prevent segfault 2022-01-10 23:04:10 -05:00
Julian Oes
76920171c7 tap_esc: fix tunes 
This removes the redundant _play_tone flag and instead just polls the
next_note() interface to check if there is something to play.
 2022-01-10 23:04:10 -05:00
Julian Oes
dd00e43ca3 mavlink: set signal_quality (and sane variance) 
Otherwise this distance data is actually not used at all.
 2022-01-10 23:04:10 -05:00