* lis3mdl: Report calibration successful when starting with -C option
* lis3mdl: Use PX4_OK, PX4_ERROR for return value / orb_unadvertise
* Fixes#10740
This change has two effects:
1. We always acknowledge a param write no matter if the value was
actually changed or not. This is according to the spec:
https://mavlink.io/en/services/parameter.html#write-parameters
2. This fixes the bug where int32 parameters were not actually acked
because the memory of the param value was casted directly to float
and then compared. In the case of a int32 parameter set from 0 to 1
it would mean that the cast to float of the memory representation
was still 0 and therefore it was assumed to be "no change" and the
ack was omitted.
The rate controller is now run directly after a gyro publication, and
as soon as it publishes the actuator controls, the output driver (fmu/...)
runs.
Test on a Pixracer:
Reduces fmu control latency from 219us to 134us.
If we run the rate controller last (same order as before, just increase
the prio), the latency is 201us.
CPU load is unchanged.
The drawback is that the attitude to rate setpoint generation is delayed
by one cycle (4ms), but it will be reduced to 1ms as soon as we run at
1kHz.
Fixes these invalid format strings:
- A `%d` for a pointer (replaced it by `%p`)
- A 0x%08x (and a 0x%0x8!) for a pointer (replaced by %p)
- 2 cases of `%d` for a `ssize_t` (replaced it by `%zi`)
- 1 case of a %u for an `int` (replaced by %i)
- 3 cases of %d for a `long` (replaced by %ld)
- 19 cases of `%d`, `%i`, `%u` or `%lu` for a `size_t` (replaced it by `%zu`)
- An unused formatting argument (removed it)
- A missing `%d` (added it)
- A missing `%s` (added it)
- 2 cases of `%llu` for a `uint64_t` (replaced it by `"%" PRIu64`)
- 6 cases of giving a string directly as format string (replaced it by `("%s", string)`)
- 2 cases of %*-s, which should probably have been %-*s.
(Looks like NuttX accepts (the invalid) %*-s, but other platforms don't.)
- A %04x for a `uint32_t` (replaced by "%04" PRIx32)
- mission logs are stored in a separate directory mission_log
- It's disabled by default
- Does not increase RAM usage if disabled (if enabled, only 300 bytes)
- Log rotate does not apply to the mission logs
Previously the formats of all known uorb messages were written.
- reduces header size by about 13KB
- reduce ulog_message_format_s size to reduce required stack size.
Largest message format is about 1000 bytes.
Daniel Agar