1f4960d480
boards: cubeorange enable pwm_input
...
Signed-off-by: Alex Mikhalev <alex@corvus-robotics.com >
2021-04-07 21:34:44 -04:00
0c3e64a7f5
Fix support for Cube Black Heater
2021-04-07 10:23:02 -04:00
9b7eae4043
rc: enable crsf and ghst telemetry on supported boards
...
Co-authored-by: Benjamin Linne <benjamin.linne.civ@mail.mil >
2021-04-07 08:51:49 +02:00
3261118538
boards: modalai-fc-v1 add rtps.cmake
2021-04-05 17:01:35 -04:00
565c644b2e
boards: CUAV keep Nora and X7pro in sync
2021-04-05 12:54:41 -04:00
ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)
...
- include icm20948 on most boards by default
- create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
2021-04-04 21:18:16 -04:00
bbf27d6960
boards: mro pixracerpro Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
43da43ddc6
boards: cubepilot cubeorange Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
fffa10ade4
boards: px4_fmu-v6u sync with other stm32h7 boards
2021-04-03 14:13:23 -04:00
825d81dd57
boards: px4_fmu-v6x sync with other stm32h7 boards
2021-04-03 14:13:23 -04:00
dcfa3c97ba
px4 fmu-v6x:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
38485a5d41
px4 fmu-v6u:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
961bac759a
mro pixracerpro:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
2f9a57c604
mro ctrl-zero-h7:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
5c7a9204a2
mro ctrl-zero-h7-oem:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
f63f1f3969
holybro durandal-v1:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
55ed76522e
cuav x7pro:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
df201342bb
cuav nora:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
2fcdadfbd1
holybro_durandal-v1:Enable UAVCAN
2021-04-03 12:47:20 +02:00
003ef59019
px4_fmu-v6x:Enable UAVCAN
2021-04-03 12:47:20 +02:00
278633c980
boards: cuav x7pro include correct adis IMU
2021-04-01 17:13:54 -04:00
369d375417
holybro_can-gps-v1_debug: disable ekf & listener due to flash overflow
2021-04-01 08:35:36 -04:00
8d3335906a
v5x: use low bandwidth mavlink mode
...
This changes the default mavlink message set from onboard to
onboard_low_bandwidth, which drastically reduces the bandwidth required to get a
usable connection.
2021-04-01 07:28:43 +02:00
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
3d667b1675
delete unused drivers/lights/blinkm
2021-03-28 19:21:29 -04:00
631d1647d3
boards: minimize unnecessary differences in default variants
2021-03-28 14:46:47 -04:00
e58af90bac
boards: holybro can-gps-v1 create separate default and debug variants
2021-03-28 12:39:22 -04:00
f65781025e
boards: mRo x21 enable mpu9250 mag (only internal)
...
- fixes #17244
2021-03-26 21:02:30 -04:00
b1c913244f
boards: CUAV X7pro restore lights
2021-03-26 18:25:39 -04:00
e77bffe582
boards: STM32H7 remove CONFIG_MM_REGIONS=3
2021-03-26 17:40:44 -04:00
c46c6e63ae
px4/fmu-v4/uavcanv1: remove non-existing tap_esc module & gyro_fft example
2021-03-24 10:08:41 -04:00
ea902e7f38
systemcmds/tests: split out individual module test commands
2021-03-23 11:39:14 -04:00
06cd3eded5
Revert "boards: CUAV Nora don't start icm20649 on SPI6 by default"
...
This reverts commit bcae99e34a
2021-03-23 05:52:27 -07:00
644794d134
Revert "boards: CUAV x7pro disable SPI6 IMU until NuttX BDMA is fixed"
...
This reverts commit 0b4006ae86
2021-03-23 05:52:27 -07:00
817d21bb39
px4 fmu-v6x:Properly configure BDMA
2021-03-23 05:52:27 -07:00
5f28ea10c0
px4 fmu-v6u:Properly configure BDMA
2021-03-23 05:52:27 -07:00
bbdb671dd2
mro pixracerpro:Properly configure BDMA
2021-03-23 05:52:27 -07:00
a8ece584e5
mro ctrl-zero-h7-oem:Properly configure BDMA
2021-03-23 05:52:27 -07:00
4eabee00d6
holybro durandal-v1:Properly configure BDMA
2021-03-23 05:52:27 -07:00
e813385f12
cuav x7pro:Properly configure BDMA
2021-03-23 05:52:27 -07:00
344be233cf
mro ctrl-zero-h7:Properly configure BDMA
2021-03-23 05:52:27 -07:00
ba3a099775
cuav nora:Properly configure BDMA
2021-03-23 05:52:27 -07:00
3581099c09
Revert "boards: disable BDMA on STM32H7 for now"
...
This reverts commit f0d1f1d679
2021-03-23 05:52:27 -07:00
e57aaaaa5e
rotate accel/gyro FIFO before publish and fix angular velocity filter resets
...
- rotates accel & gyro FIFO data before publication both to simplify downstream usage (including log review) and fix other issues
- to best handle int16_t data rotations are now either performed with swaps if possible, otherwise promoted to float, rotated using the full rotation matrix, then rounded back to int16_t
- fix sensors/vehicle_angular_velocity filter reset both with proper rotation and new calibration uncorrect helper
- in FIFO case filtering is done before calibration is applied, but we need to handle a possible reset from a completely different sensor (vehicle body angular velocity -> sensor frame uncorrected data)
2021-03-22 12:01:12 -04:00
0d4f48a8d2
spracing h7extreme:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
cdcff35760
cubepilot cubeorange:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
2373ba47a2
mro pixracerpro:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
6780428a9d
mro ctrl-zero-h7:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
fa5dfb29cb
mro ctrl-zero-h7-oem:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
216959e221
holybro durandal-v1:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
Alex Mikhalev