fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-05-02 05:04:08 +08:00
Code Issues Packages Projects Releases Wiki Activity
38,280 Commits 852 Branches 161 Tags
Commit Graph

106 Commits

Author SHA1 Message Date
Peter van der Perk
ed5fee1a72 Backport #18311 mc atune 2021-10-07 10:09:01 -04:00
Peter van der Perk
454c907b7d Kconfig backport #18327 mag_bias 2021-10-07 10:09:01 -04:00
Peter van der Perk
36191e649a Kconfig backport #18289 and other flash size fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk
33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk
b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00
Peter van der Perk
21e6547ac7 [Kconfig] Toolchain & platform fixes, SITL still broken 2021-10-07 10:09:01 -04:00
Peter van der Perk
6af0477733 [Kconfig] Gnerate px4board from old cmake 
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
 2021-10-07 10:09:01 -04:00
Daniel Agar
bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every 
- remove ts_to_abstime dependency
 2021-10-06 14:39:59 -04:00
Daniel Agar
c271a9e3e6 add sd_stress to all boards and run on test rack 2021-10-04 17:38:31 -04:00
Daniel Agar
6d78054f50
mavlink USB auto start/stop on boards with VBUS 
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
 2021-10-03 15:32:54 -04:00
bresch
1443f773da mbe: add module to targets 2021-10-02 21:25:21 -04:00
bresch
5874b1f87c mc atune: add module to all targets 
- adjust flash constrianed targets to fit
 2021-10-02 18:12:05 -04:00
Beat Küng
c5c80e31b6 boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h 2021-09-08 16:10:24 -04:00
Beat Küng
a8e75d174c boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS 2021-09-08 16:10:24 -04:00
Daniel Agar
40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
David Sidrane
6b27c28787 uvify_core: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
Beat Küng
0e1f3a2d62 px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name 2021-08-03 10:36:25 +02:00
Kirill Shilov
e13884410b heater: added support of inverted IMU heat controller output 2021-07-20 10:37:53 -04:00
David Sidrane
05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
Daniel Agar
6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar
631d1647d3 boards: minimize unnecessary differences in default variants 2021-03-28 14:46:47 -04:00
Daniel Agar
f8eaa6e46b ROMFS handle bl_update generically 
- include all available legacy bootloaders
 2021-03-11 00:38:18 +01:00
Daniel Agar
4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar
19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Daniel Agar
ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar
a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar
8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar
41b0f83c0c
drivers/magnetometer: Bosch BMM150 rewrite 
- same pattern as other new drivers (state machine, checked register mechanism, no sleeps, etc)
 - self test has been rolled into regular startup sequence
 - still I2C only, but will be expanded in the future
 - configure to high accuracy preset
 2021-02-06 12:50:23 -05:00
Daniel Agar
78dff6adcb boards: add CONSTRAINED_MEMORY build option 
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
 - limits number of EKF2 multi instances to 2.
 - enabled on all cortex m4 boards
 2021-02-01 08:56:22 +01:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar
cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Matthias Grob
7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane
22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane
f8148593ad uvify_core: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar
c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar
233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Tanja Baumann
b5ebdb8e41
add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane
c5f479dac7 uvify_core: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane
97c17d5d4a uvify_core Updates for NuttX 9.1.0- 
uvify_core: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar
7569722821
iSentek IST8310 magnetometer rewrite 
- simple state machine to reset, configure, etc
 - checked register mechanism (sensor will reset itself on configuration error)
 - configured in 16 bit mode (1320 LSB/Gauss instead of 330 LSB/Gauss)
 - adjusted orientation handling in driver to match datasheet as closely as possible
     - in many external compass units the rotation was wrong and very difficult to actual determine how to set correctly
 2020-09-02 13:14:45 -04:00
Daniel Agar
2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar
e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar
6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar
5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar
746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar
28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar
8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Beat Küng
34c75f2d36 boards: temporarily disable UART TX DMA 
work-around for https://github.com/PX4/Firmware/issues/14659.
This can be reverted when fixed properly.
 2020-04-27 08:47:46 -04:00
Daniel Agar
06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00