* moving raptor
bump
compiles and raptor mode appears
hovering with RAPTOR seems to work
Using Raptor to execute offboard commands works (using multirobot f03825a5795a77c5a095f799eeb8e0b646fe7176 to feed the trajectory_setpoint). Requires more testing
simplified rotmat
runtime inference frequency multiple
arming request response reflects actual readiness
adjusting to fit IMU gyro ratemax
relaxing control timing warning thresholds for SITL
Using mode registration to signal if offboard commands should be forwarded to trajectory_setpoint instead of just hardcoding vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_OFFBOARD
adopting new "request_offboard_setpoint" in raptor module
replace offboard seems good
mc_raptor: overwrite offboard parameter
separate raptor config
addendum
Raptor off by default
RAPTOR readme
Loading raptor checkpoint from tar works.
check if load was successful
refactoring: cutting out the pure C interface to allow direct testing of the policy input/output behavior from the file, without fully loading it into memory first
adapter not needed anymore
ripping out test observation mode (not used in a long time)
fixing warnings
bump RLtools to fix the remaining warnings
Loading RAPTOR checkpoint from sdcard seems to work on FMU-6C
embedding Raptor policy into flash works again
also printing checkpoint name when using the embedded policy
cleaner handling of the checkpoint name
back to reading from file
ripping out visual odometry checks
cleaner
more debug but no success
bump rlt
bump
pre next rebase
we can publish the no angvel update because we latch onto it with the scheduled work item anyways
this kind of runs on the 6c
still bad
SIH almost flying
saving stale traj setpoint yaw
new error. timestamp not the problem anymore
bump rlt; SIH works with executor
shaping up
bumping blob (include tar checkpoint)
cleaning up
fixing formatting
update readme
* moving raptor
bump
compiles and raptor mode appears
hovering with RAPTOR seems to work
Using Raptor to execute offboard commands works (using multirobot f03825a5795a77c5a095f799eeb8e0b646fe7176 to feed the trajectory_setpoint). Requires more testing
simplified rotmat
runtime inference frequency multiple
arming request response reflects actual readiness
adjusting to fit IMU gyro ratemax
relaxing control timing warning thresholds for SITL
Using mode registration to signal if offboard commands should be forwarded to trajectory_setpoint instead of just hardcoding vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_OFFBOARD
adopting new "request_offboard_setpoint" in raptor module
replace offboard seems good
mc_raptor: overwrite offboard parameter
separate raptor config
addendum
Raptor off by default
RAPTOR readme
Loading raptor checkpoint from tar works.
check if load was successful
refactoring: cutting out the pure C interface to allow direct testing of the policy input/output behavior from the file, without fully loading it into memory first
adapter not needed anymore
ripping out test observation mode (not used in a long time)
fixing warnings
bump RLtools to fix the remaining warnings
Loading RAPTOR checkpoint from sdcard seems to work on FMU-6C
embedding Raptor policy into flash works again
also printing checkpoint name when using the embedded policy
cleaner handling of the checkpoint name
back to reading from file
ripping out visual odometry checks
cleaner
more debug but no success
bump rlt
bump
pre next rebase
we can publish the no angvel update because we latch onto it with the scheduled work item anyways
this kind of runs on the 6c
still bad
SIH almost flying
saving stale traj setpoint yaw
new error. timestamp not the problem anymore
bump rlt; SIH works with executor
shaping up
bumping blob (include tar checkpoint)
cleaning up
fixing formatting
update readme
updating gitignore
* fixing format and declaring submodules as cmake dependencies
* adding uORB message documentation
* fixing comment alignment
* Adding option to restrict mc_raptor to not listen to the trajectory_setpoint (use the position and yaw at activation time as reference instead)
* bump RLtools; relax timing thresholds and adding real world readme
* smooth traj tracking performance
* Measuring trajectory_setpoint timing (providing stats in raptor_status); reverting accidental .gitignore modification
* More ideomatic way of setting the path to the policy checkpoint
* Reset trajectory_setpoint on raptor mode activation
* Adding internal trajectory generation (feeding trajectory_setpoint over Mavlink is too noisy). Quite agile trajectory tracking, good performance
* stable flight
* Update msg/versioned/RaptorInput.msg
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* adopting message formatting conventions
* sort raptor.px4board
* Archiving RegisterExtComponentRequestV1.msg
* Add message versioning for VehicleStatus v2 and RegisterExtComponentRequest v2
* fixing formatting
* making internal reference configurable via command
* RAPTOR docs wip
* raptor internal reference documentation
* Finishing RAPTOR docs first draft
* adding logging instructions
* Fixing missing command documentation test error
* fixing format
* adding motor layout warning
* raptor minimal subedit - prettier, images etc
* Improve intro
* Fix up Neural_Networks version
* Mentioning "Adaptive" in the RAPTOR documentation's title
* Adding clarifications about the internal reference trajectory generator
* Removing "foundation policy" wording
* Fixing new-line check
* Removing redundant (evident through directory hierarchy) raptor_ from filenames
* Unifying Neural Network docs (mc_nn_control and mc_raptor) under the "Neural Network" topic
* Fix to standard structure
* Making the distinction between mc_nn_control and mc_raptor more clear and fixing the comparison table
* Removing trajectory_setpoint forwarding flag from external mode registration request and from the vehicle status
* Trivial layout and wording fixes
* fixing docs error
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Implemented driver for MCP23017
* fixed compatability with mcp23009. (naming of instantiated GPIO-Devices)
* removed some comments
* removed even more comments
* commented out instatntiation of driver since it will not be used with v6x
* removed last useless comments
* re-activated gpio_mcp23009 driver, removed useless comments and empty lines
* removed empty lines at the end of mcp23017.cpp
* removed empty line
* Implemented driver for MCP23017
* fixed compatability with mcp23009. (naming of instantiated GPIO-Devices)
* removed some comments
* removed even more comments
* commented out instatntiation of driver since it will not be used with v6x
* removed last useless comments
* re-activated gpio_mcp23009 driver, removed useless comments and empty lines
* removed empty lines at the end of mcp23017.cpp
* removed empty line
* basic working implementation
* first improved driver version with shared code base for MCP23009 & MCP23017 (built as state machine with sanity checks)
* removed unused imports
* changed module name from MCP to MCP230XX
* removed debug print statements
* adjusted auto start command of driver
* removed comments
* -added seperate main functions for both derivative modules (mcp23009 and mcp23017)
* compile common functions as shared library in src/lib/drivers
* fixed cleanup of modules
* ->unclean working version with shared common library
* used make format
* working & cleaned version
* -> Added CallbackHandler to be able to use multiple reading GPIO-expanders simultaneously
-> Removed old mcap23009 calls and pin registrations
-> Adjusted GpioIn.msg to contain MAX_INSTANCES
* ->removed unused imports
->used make format
* Fix: Re-enabled platform_mcp_gpio for accton-godwit, cuav, fmu-v5x
* Fix: enabled platform_mcp_gpio in px4/fmu-v5x
* added depency to fmu-v5x
* Fix: removed new lines
* Fix: fixed linker errors
* removed unused linkage against mcp-library
* Made mcp start calls consistent for fmu-v5x and fmu-v6x
* moved logging of comm errors to read/write function directly
* added perf_count for sanity_check
* removed error message
* ensured member variables follow naming convention
* added retries to probe function
* simplyfied state-logic
* add break to terminate loop early
* ensured clean state when register_gpios() fails
* add registered-flag to pins
* used path from top dir instead of relative path in CMakeLists
* used constexpr to set parameters instead of calculating them at runtime
* style: used make format
* fix: corrected i2c_bus assignment
* style: init input of callbackhandler to 0
* fix: mark pin as registered if successful
* style: made arguments const type
---------
Co-authored-by: Alexander Lerach <alexander@auterion.com>
* Adds configurable I2C address for PCA9685 PWM driver
Introduces a parameter to set the I2C address for the PCA9685 PWM output driver, enhancing flexibility for hardware variations. Updates documentation and board initialization scripts to support the new configuration and streamline device startup.
* Update src/drivers/pca9685_pwm_out/module.yaml
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/drivers/pca9685_pwm_out/module.yaml
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
We should not build and release with the MAVLink development dialect
because messages in development.xml can change at any time and break
things.
Instead we should prototype and test things using specific mavlink-dev
targets.
* rt106x: Use platform SPI hal layer
* rt106x: Add romapi support and reboot to isp/bootloader
* bootloader: imxrt_common: Add rt106x support
* NXP MR-Tropic initial commit
* Add missing file for mr-tropic bootloader
* nxp-mr-tropic:Bootloader Alow Assertion debugging & Keep Ram Vectors
* nxp-mr-tropic: Firmware Boot from bootloader
* nxp-mr-tropic:Add Bootloader bin file
* mr-tropic: Update config and linker
Fixes enet issues with write-back and some code cleanup.
Furthermore increase NOR LittleFS to 256kB to reflect on linker
* Update NuttX
* mr-tropic: fix itcm apping and add mr-tropic to itcm check
---------
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
