fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-15 07:13:33 +08:00
Code Issues Packages Projects Releases Wiki Activity
48,275 Commits 852 Branches 161 Tags
copilot/fix-stack-buffer-overflow
Commit Graph
16 Commits
Author SHA1 Message Date
Matthias Grob f2bca92221 Fix duplicate newlines at the end of files 2024-07-19 14:33:36 +02:00
Julian Oes 19b681ca1f Remove SYS_USE_IO param 
The param is not really required anymore with the actuator
configuration. Also, when it is set to 0, RC doesn't work for some
boards which would be nice to avoid.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-10 12:17:23 +13:00
Daniel Agar cac9c51ac8 ROMFS: purge old mixing system 
- SYS_USE_IO is now off by default (enabled by default per board)
 2022-09-09 09:14:09 -04:00
Daniel Agar 6d78054f50 mavlink USB auto start/stop on boards with VBUS 
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
 2021-10-03 15:32:54 -04:00
Daniel Agar c5b1fe86ca delete deprecated BAT_* parameters 2021-07-08 22:19:12 -04:00
Daniel Agar ad934b4911 icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) 
- include icm20948 on most boards by default
 - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
 2021-04-04 21:18:16 -04:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar a2442ffb48 board: enable UAVCAN sensors by default on F7/H7 2021-02-02 09:01:12 +01:00
Daniel Agar 3b71e8e62d boards: cubepilot fix BAT2_V_DIV param default typo 2021-01-31 21:16:42 -05:00
Daniel Agar 763c3b8fda boards: start enabling multi-EKF by default on F7/H7 2021-01-10 17:56:34 +01:00
Daniel Agar ce51a01822 boards: cubepilot orange and yellow start isolated sensor bus (SPI4) first 
- this makes the isolated sensors primary by default
 2020-11-16 09:31:12 -05:00
SalimTerryLi c037dbef21 Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Beat Küng 787f9c1213 i2c: use board-specific bus numbering for '-X -b <bus>' CLI 
As boards don't have their external buses labeled consistently, it was not
useful to use an abstraction.
 2020-09-03 15:32:35 -04:00
Daniel Agar 65ab7cef2e boards: cubepilot/cubeyellow small fixes and improvements 
- fix UART config (GPS1, etc)
 - TELEM2 enable TX DMA
 - init simplify (sync with CubeOrange)
 - amber LED use for armed state
 - manually start ak09916 (Here2) on I2C2 with proper rotation
 2020-08-16 17:45:47 -04:00
Daniel Agar cfbf69f2a7 boards: rename Hex -> CubePilot 
- hex_cube-orange_default -> cubepilot_cubeorange_default
 - hex_cube-yellow_default -> cubepilot_cubeyellow_default
 2020-07-26 13:55:41 -04:00