Commit Graph
84 Commits
Author SHA1 Message Date
hauptmech e18e5ca5b5 Add SENS_MAG_ID parameter
Record devid to SENS_MAG_ID during mag calibration
Verify devid matches SENS_MAG_ID during preflight_check
2015-01-17 18:41:43 +01:00
Lorenz Meier a0e1255e28 Merge pull request #1543 from thomasgubler/rcparamtune
RC param tune
2015-01-01 18:15:28 +01:00
Mohammed Kabir 84d724503f Remove invalid params 2014-12-30 18:06:48 +05:30
Thomas Gubler e9b41528dc prototype for changing params by rc 2014-12-28 22:26:39 +01:00
M.H.Kabir d40168dc4b Add support for rotations of PX4flow 2014-12-27 23:01:31 +05:30
Thomas Gubler 1913ae19f1 add param for qnh 2014-08-17 10:45:30 +02:00
Lorenz Meier c6c9c49823 Implement the external mag param in a fashion that retains backward compatibility 2014-07-16 14:58:43 +02:00
Lorenz Meier a0d150332a Add note to param about tubes 2014-07-12 15:39:04 +02:00
Lorenz Meier e3afb669ca sensors: Fix usage of offset for measurements 2014-07-11 22:09:47 +02:00
Lorenz Meier 3461d3d215 Introduce analog scaling parameter for analog airspeed sensor 2014-07-11 09:10:35 +02:00
Julian Oes fdceb8b062 Merge branch 'master' into navigator_rewrite_offboard2_merge
Conflicts:
	mavlink/include/mavlink/v1.0/common/common.h
	src/modules/mavlink/mavlink_receiver.cpp
2014-07-02 14:59:43 +02:00
Julian Oes 993e4d41d8 sensors: missing param for offboard switch 2014-06-27 12:53:52 +02:00
Darryl Taylor ebd68f4ffa Clarified parameter comments and added @group attributed for auto-generation. 2014-06-22 16:43:05 +08:00
Darryl Taylor 45d5e26009 Define float params properly: 0.0f instead of just 0 2014-06-20 14:37:44 +08:00
Darryl Taylor 5ed1cf7e8d Fixed too-long param names. 2014-06-18 21:34:38 +08:00
Darryl Taylor 90a89ff2cd WIP: Support in-flight fine tuning of board alignment. Implemented by applying a user supplied rotation matrix via new SENS_BOARD_(PITCH, ROLL, YAW)_OFF params in the sensors app. Currently only tested in QGC. 2014-06-18 20:27:35 +08:00
Anton Babushkin 950571eaf6 Merge branch 'master' into offboard2 2014-05-21 10:40:58 +02:00
Anton Babushkin b12928548c Merge branch 'master' into acro2 2014-05-20 00:03:00 +02:00
Anton Babushkin 8c4b35cc23 Merge branch 'master' into offboard2 2014-05-16 12:12:43 +02:00
Ash Charles e5508a1aa0 Add Gumstix AeroCore device
Based on the work of Andrew Smith [1], add board configuration and device
drivers to support the Gumstix AeroCore (previously Aerodroid) board [2]. The
AeroCore is an autopilot board based on a STM32F427 similar to the FMUv2.

[1] https://github.com/smithandrewc/Firmware
[2] https://store.gumstix.com/index.php/products/585/

Signed-off-by: Ash Charles <ashcharles@gmail.com>
2014-05-13 09:41:41 -07:00
Anton Babushkin aae42d2607 sensors: commented "offboard" switch removed 2014-05-11 13:41:37 +02:00
Anton Babushkin 808badb34d Use "POSCTL" switch name consistently 2014-05-11 12:54:15 +02:00
TickTock- 6c76e8ea50 shortened rc_assisted_th to rc_assist_th in case we add a dedicated switch mapping later 2014-04-29 20:51:04 -07:00
TickTock- 31089a290b Replaces poshold/althold with posctrl/altctrl 2014-04-28 21:47:45 -07:00
TickTock- 269800b48c renamed EASY to POSHOLD and SEATBELT to ALTHOLD 2014-04-27 14:06:00 -07:00
TickTock- 07c35010aa Merged in upstream master 2014-04-27 12:43:13 -07:00
Anton Babushkin 63c50676f9 MISSION switch renamed to LOITER 2014-04-24 22:38:19 +02:00
TickTock- 971e8fc4ff Made failsafe more intuitive. Default (0) maps to whatever channel is throttle. If a non-zero value is entered, a direct channel map is used so use 2014-04-22 23:19:04 -07:00
TickTock- 81c03154b9 Added ASSISTED, AUTO, EASY, RETURN, & LOITER programmable thresholds to enable various user mode switch configs (orig., 2x3, 1x6, etc). 2014-04-22 21:49:29 -07:00
TickTock- 7e621070ca renamed mission_switch to loiter_switch and assisted_switch to easy_switch 2014-04-22 18:23:27 -07:00
TickTock- d6e6ee3440 Merge branch 'rc_timeout' of https://github.com/TickTock-/Firmware into rc_merged 2014-04-22 17:43:36 -07:00
TickTock- 86a0862af6 Added rc_map_failsafe to enable use of channels other than throttle for failsafe. 2014-04-19 13:07:09 -07:00
Anton Babushkin 0b45e01db9 Merge branch 'failsafe_sbus_cleanup' into rc_timeout 2014-04-05 15:29:46 +04:00
Lorenz Meier 3b5e6f9833 sensors and px4io driver: Guard against failsafe trigger for inverted remotes 2014-04-05 11:28:07 +02:00
Lorenz Meier fb44ad8e22 Simplify the failsafe handling, reduce 3 params to one 2014-04-05 10:29:17 +02:00
Anton Babushkin e2ac5222d8 mc_att_control, mc_pos_control: update manual_control_setpoint usage 2014-04-03 20:54:28 +04:00
Anton Babushkin b165e6ba20 Merge branch 'master' into acro2 2014-03-08 22:19:18 +04:00
Anton Babushkin 4deefb6902 Merge branch 'beta' into offboard2 2014-02-17 17:08:47 +04:00
Stefan Rado 7441efde47 Add a lot of MAVLink parameter documentation. 2014-02-14 01:48:00 +01:00
Anton Babushkin 7f4f9a5f5f ACRO mode implemented 2014-01-31 22:44:05 +01:00
Anton Babushkin cf6d89301b Merge branch 'beta' into offboard2 2014-01-29 21:27:44 +01:00
Lorenz Meier 1c40ce968a RC config params set to more useful default values - needs more testing 2014-01-23 08:01:55 +01:00
Anton Babushkin 1dc9785083 OFFBOARD switch added, WIP 2014-01-22 16:52:35 +01:00
Anton Babushkin db1ea9bf51 Battery: default parameters updated 2014-01-13 10:11:16 +01:00
Anton Babushkin d042b63657 Merge branch 'master' into batt_fixes 2014-01-13 09:48:27 +01:00
Lorenz Meier f595b204ea Parameter documentation improvements 2014-01-13 08:33:25 +01:00
Lorenz Meier 9b711d6a72 Merged origin/master into batt_fixes 2014-01-07 15:34:13 +01:00
Lorenz Meier cddbb0d23f Merged master 2013-12-27 21:12:51 +01:00
Lorenz Meier dd5549da46 Hotfix: Better dead zone defaults 2013-12-27 15:50:28 +01:00
Lorenz Meier 9abf31c2ba Support 18 channels correctly on FMU 2013-12-22 21:09:47 +01:00