fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
37,957 Commits 852 Branches 161 Tags
Commit Graph

37957 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Daniel Agar
f1d00fe697 Tools/HIL: only print timestamp if newline in output 2021-09-01 15:16:00 -04:00
Daniel Agar
6ee16156bb Jenkins: hardware only list relevant parameters 2021-09-01 15:16:00 -04:00
Daniel Agar
33a3bc143b boards: ark_can-gps_debug disable systemcmds to save flash 2021-09-01 15:16:00 -04:00
Daniel Agar
225bd2d5a3 Jenkins: hardware limit stackcheck and debug build cpu usage 2021-09-01 15:16:00 -04:00
Daniel Agar
a5a457d744 sensors: relax default data_validator timeout 20->40ms 2021-09-01 15:16:00 -04:00
Daniel Agar
3ff9295cbd Jenkins: hardware nxp_fmuk66-v3 limit IMU_GYRO_RATEMAX to save cpu 2021-09-01 15:16:00 -04:00
Daniel Agar
bd8937642f lib/sensor_calibration: only warn if external rotation resetting 
- this also happens with the actual default parameter value (-1)
 2021-09-01 15:16:00 -04:00
Daniel Agar
40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
Daniel Agar
65b1a9648d Tools/HIL/run_nsh_cmd.py: fail if ERROR printed in output 2021-09-01 15:16:00 -04:00
Daniel Agar
2f99857b0a systemcmds/bl_update: add CONFIG_ARCH_CHIP_STM32F7 file size limit 2021-09-01 15:16:00 -04:00
Daniel Agar
369776cd4e Jenkins: hardware don't tolerate px4io status on known hardware 2021-09-01 15:16:00 -04:00
Daniel Agar
c6dd03a8aa Tools/HIL/run_nsh_cmd.py - raise timeout slightly 
- helps on slower debug builds
 2021-09-01 15:16:00 -04:00
Daniel Agar
c508404975 boards/px4/fmu-v4pro: fix incorrectly sized FRAM 2021-09-01 15:16:00 -04:00
Daniel Agar
61931fcbbc Jenkins: hardware failure allow px4_fmu-v5_debug monitor firmware upload failure 
- due to reported errors in NuttX low level drivers
 2021-09-01 15:16:00 -04:00
Daniel Agar
9e0fa8e82b boards: set SENS_TEMP_ID defaults 2021-09-01 15:16:00 -04:00
Daniel Agar
5dfc07cb1b systemcmds/param: add set-default sient (-s) option 2021-09-01 15:16:00 -04:00
Daniel Agar
054d0b995c px4iofirmware: remove police lights to avoid getting stuck 2021-09-01 15:16:00 -04:00
Daniel Agar
2864735c44 Tools/HIL/monitor_firmware_upload.py - fail if there's an ERROR during startup 2021-09-01 15:16:00 -04:00
Daniel Agar
70831a8e2c px4io: checkcrc warn on mismatch 2021-09-01 15:16:00 -04:00
Daniel Agar
8434da6f79 px4io: reduce upload retries 5 -> 2 2021-09-01 15:16:00 -04:00
Daniel Agar
6be7926ed3 px4io: add watchdog 
- F1 iwdg:Support optional configuable init

Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
 2021-09-01 15:16:00 -04:00
Daniel Agar
f856b89723 boards: Holybro H7 boards clear MPU early in board init 
- needed if the bootloader configures the memory protection unit (MPU)
 2021-09-01 08:53:05 +02:00
Daniel Agar
c700ffff92 boards: CUAV H7 boards clear MPU early in board init 
- needed if the bootloader configures the memory protection unit (MPU)
 2021-09-01 08:53:05 +02:00
Lorenz Meier
965f11e923 MRO: Set up MPU after boot to app 
This is needed in case the bootloader configured the MPU, which could interfere with the app as the bootloader memory map / configuration is different.
 2021-09-01 08:53:05 +02:00
Daniel Agar
a819a7b7c4 boards: cube orange fully clear any existing MPU configuration as soon as possible 2021-09-01 08:53:05 +02:00
Daniel Agar
7925787f62 px4io_serial: ensure TX DMA is stopped if exiting early on stream error 
- otherwise the next retry can happen quickly enough that dma setup
hangs waiting for the stream
 2021-08-31 23:11:07 +02:00
Julian Oes
6cb0259b79 commander: improve progress output 
Instead of outputting progress at weird percentages and dropping 100%,
this now sends the progress every 10 %.
 2021-08-30 21:05:40 -04:00
Daniel Agar
ca685490a9 drivers/rc_input: only print vrssi if analog stable 2021-08-30 12:45:56 -07:00
Daniel Agar
15c01a9732 drivers/rc_input: flush buffers when beginning new scan state 2021-08-30 12:45:56 -07:00
Daniel Agar
a305fc9c34 drivers/rc_input: only invert RC when starting/ending SBUS 2021-08-30 12:45:56 -07:00
Daniel Agar
79703c9c7a drivers/rc_input: don't resume scanning if armed 2021-08-30 12:45:56 -07:00
Daniel Agar
98f89aae9b drivers/rc_input: always report new lock 2021-08-30 12:45:56 -07:00
Hylke Faas
34483aef0f Do not resend a mission request if it is not the expected sequence number, this can cause an excessive increase of used bandwith (#18082) 2021-08-30 13:39:51 +02:00
Daniel Agar
a917793248 mavlink: only block parameter sync until boot complete 2021-08-30 13:27:51 +02:00
Daniel Agar
ab1c90d831 boards: cubeorange/cubeyellow use amber LED for armed state 2021-08-28 09:15:41 -04:00
Jukka Laitinen
c3c30e5d4f Fix memory corruption when work queue is being deleted 
When the last WorkItem is deleted, it is removed from a work queue and the
queue is being stopped. But, the queue itself might get deleted in the middle,
in a higher priority thread than where the WorkItem deletion was performed from

If the WorkQueue::Detach accesses the member variables after this, there is memory
corruption

This happens in particular when launching i2c or spi devices in
I2CSPIDriverBase::module_start:

- The "initializer" is deleted when the instance is not found and the iterator
  while loop continues.
- The workqueue is deleted in the middle of "initializer" deletion when the
  WorkQueueRunner returns.

This prevents deletion of the WorkQueue before the Detach has been finished,
in the specific case that the ::Detach triggers the deletion

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-08-27 10:43:45 +02:00
Daniel Agar
99463fce48
Update submodule mavlink v2.0 to latest Thu Aug 26 12:39:19 UTC 2021 (#18153) 
- mavlink v2.0 in PX4/Firmware (c6a6403ce2039823f80af40ac5441f51afcdefb0): 51204fc82b
    - mavlink v2.0 current upstream: e0e24de622
    - Changes: 51204fc82b...e0e24de622

Co-authored-by: PX4 BuildBot <bot@px4.io>
 2021-08-26 11:43:31 -04:00
Daniel Agar
c6a6403ce2 px4io: increase stack 1500 -> 1536 bytes 2021-08-25 21:32:05 +02:00
Daniel Agar
f59b54abd7 boards: io-v2 increase idle thread stack 280 -> 316 bytes 2021-08-25 21:32:05 +02:00
Daniel Agar
22e62a044a px4iofirmware: never directly touch mixer from isr 2021-08-25 21:32:05 +02:00
Jacob Crabill
1ee5f75aa5
uavcan_v1: Add PublicationManager and uORB Publisher (#17863) 2021-08-25 14:56:23 -04:00
Beat Küng
d8214f5e00 component_information: merge extra component_information_header target 
With Makefile build, generate_component_general.py was called twice during
build, which did not happen with the ninja build.

This created a race condition with the following error in rare cases:
Traceback (most recent call last):
  File "/__w/PX4-Autopilot/PX4-Autopilot/src/lib/component_information/generate_component_general.py", line 79, in <module>
    save_compressed(filename)
  File "/__w/PX4-Autopilot/PX4-Autopilot/src/lib/component_information/generate_component_general.py", line 33, in save_compressed
    with open(filename, 'r') as content_file:
FileNotFoundError: [Errno 2] No such file or directory: '/__w/PX4-Autopilot/PX4-Autopilot/build/px4_sitl_default/component_general.json'
make[3]: *** [src/lib/component_information/CMakeFiles/component_information_header.dir/build.make:68: component_general.json] Error 1

Merging the targets avoids the duplicate execution.
 2021-08-25 10:04:39 -04:00
Beat Küng
af53b60713 Revert "component_information: add debug instrumentation for FileNotFoundError exception" 
This reverts commit ca454c93d163a551f7f24baac41a3b29538860ae.
 2021-08-25 10:04:39 -04:00
Jukka Laitinen
8f03045fb2 Increase micrortps_client_rcv stack for 64 bit targets 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-08-24 10:16:27 -04:00
Jukka Laitinen
69021dbafa Increase navigator stack for 64-bit targets 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-08-24 10:16:27 -04:00
Jukka Laitinen
e49791cdf2 Increase mavlink stack for 64 bit targets 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-08-24 10:16:27 -04:00
Jukka Laitinen
523578d2ce Increase stack size of wq:manager and worker threads for 64 bit targets 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-08-24 10:16:27 -04:00
Jukka Laitinen
29248cb6b8 Increase gps stack for 64 bit targets 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-08-24 10:16:27 -04:00
Jukka Laitinen
733b1e9e67 Increase logger stack size for 64 bit targets 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-08-24 10:16:27 -04:00
Jukka Laitinen
8cf121fc9d Increase dataman stack size for 64 bit targets 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-08-24 10:16:27 -04:00