d9954ecaf0
lib/magnetometer_bias_estimator: Add library for online magnetometer calibration on the ground
...
Co-authored-by: bresch <brescianimathieu@gmail.com >
2021-01-18 11:44:58 -05:00
36d15ada1c
vscode: do not enable smart case search
...
in workspace settings. This comes down to user preference
and there's no particular reason to change this based on the workspace.
I found it confusing to have this non-default behavior
just for PX4 editing.
2021-01-18 11:33:21 -05:00
77b21680fb
sync ctrlalloc boards and add to CI
2021-01-18 11:25:37 -05:00
311a2bd3e8
update ctrlalloc airframe location
2021-01-18 11:25:37 -05:00
3e5e5ab1d5
control_allocator and angular_velocity_controller throttle parameter_update subscription
2021-01-18 11:25:37 -05:00
c36340d29a
ActuatorEffectivenessMultirotor: set effectiveness to zero when computing the matrix
...
Just to be on the safe side.
2021-01-18 11:25:37 -05:00
212ec821b1
control_allocator: set unused actuators to trim instead of min
2021-01-18 11:25:37 -05:00
3606f86518
control_allocator: ensure unused outputs are initialized to min
...
Mostly important in cases where the ouputs would change (e.g. param change)
2021-01-18 11:25:37 -05:00
3dad79d8f5
control_allocator: inline one-line setters & getters
2021-01-18 11:25:37 -05:00
164511a7b5
control_allocator: avoid vector copies and sqrt()
2021-01-18 11:25:37 -05:00
0e66b0876b
control_allocator: change SequentialDesaturation to existing MC mixer
...
And limit the operations to the number of configured outputs.
Only using the number of configured actuators reduces CPU load by ~2% on
F7 @1khz.
2021-01-18 11:25:37 -05:00
308f614735
refactor control_allocator: directly get the effectiveness matrix when updated
...
Reduces stack + RAM usage
2021-01-18 11:25:37 -05:00
38782029ad
fix control_allocator: set _last_run at the correct place
2021-01-18 11:25:37 -05:00
0e86ab47f6
fix control_allocator: use 'delete' instead of 'free', guard against out-of-memory
2021-01-18 11:25:37 -05:00
066464c4e8
control_allocator: remove unused _task_start
2021-01-18 11:25:37 -05:00
25f3fe8456
fix control_allocator_status: torque_setpoint_achieved and thrust_setpoint_achieved are bool
2021-01-18 11:25:37 -05:00
343cf5603e
initial control allocation support
...
- control allocation module with multirotor, VTOL standard, and tiltrotor support
- angular_velocity_controller
- See https://github.com/PX4/PX4-Autopilot/pull/13351 for details
Co-authored-by: Silvan Fuhrer <silvan@auterion.com >
Co-authored-by: Roman Bapst <bapstroman@gmail.com >
2021-01-18 11:25:37 -05:00
fc6b61dad1
Try 'min' for units
2021-01-18 16:26:53 +01:00
d99d52960e
Fix default _rtl_xxx values
2021-01-18 16:26:53 +01:00
d965f1cbc0
Add rtl_flight_time message
2021-01-18 16:26:53 +01:00
5a9fe312b5
Fix test failure on rebase: set lpos valid
2021-01-18 16:26:53 +01:00
af8d178ae5
Fix spurious RTL triggers
...
Two sources:
1. global to local conversion was sometimes giving issues, so do everything in global
2. on startup the RTL didn't check if the home position was valid before processing it
2021-01-18 16:26:53 +01:00
b5f0a7ea03
Fix RangeRTL test
2021-01-18 16:26:53 +01:00
5500a84b6a
Add timestamp to RTL message
2021-01-18 16:26:53 +01:00
f169247bc2
Add RTL topics to ulog default profile
2021-01-18 16:26:53 +01:00
67082ccb2b
Test the vehicle type parameter usage
2021-01-18 16:26:53 +01:00
100c64c790
Test the navigator side, and fix another trig edge case
2021-01-18 16:26:53 +01:00
a736ba2435
Minor tweak in wind handling
2021-01-18 16:26:53 +01:00
e847ef1a4d
Add trig tests for wind calculations, and fix bugs / edge cases
2021-01-18 16:26:53 +01:00
7482413005
Add Range-based RTL
2021-01-18 16:26:53 +01:00
e817fb83f5
pwm_extra: Add PWM_EXTRA parameters.
...
Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com >
2021-01-18 15:43:28 +01:00
7a8203bf19
Enable third mixer when using UAVCAN for main mixer.
2021-01-18 15:43:28 +01:00
02c0f08060
flashfs: fix alignment ambiguity
...
Instead of ignoring the warnings.
Thanks to @Ole2mail and @yuhaim for the suggestions.
2021-01-18 14:19:29 +01:00
920d6d84b5
rtps: increase non-alias ID range by reducing the alias space ID
2021-01-18 09:33:14 +01:00
54486b995e
uorb_rtps_message_ids: add required topics to enable offboard control from DDS
2021-01-18 09:33:14 +01:00
dab90f86a4
drivers/gps: limit to ublox only flash constrained targets
2021-01-18 09:30:01 +01:00
78c05275d2
tailsitter: Fix differential thrust in FW mode.
...
Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com >
2021-01-18 09:04:27 +01:00
e4d223f098
boards: CUAV Nora fix BMI088 orientation
2021-01-17 23:19:18 -05:00
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
3abe2e82d1
mpu9250: create dedicated i2c version and delete legacy driver
...
- update crazyflie and bbblue usage
- eventually this should be merged with the SPI version after interface
changes are made
2021-01-17 16:11:19 -05:00
c9a7894230
boards: bitcraze crazyflie fix boot
...
- add console to USART3 for now
2021-01-17 16:11:19 -05:00
2ed48f041c
mavlink: Templated SCALED_IMU mavlink stream
2021-01-17 12:32:51 -05:00
031bbb7f3e
FlightModeManager: handle commands all the time
...
Moving the command handling to a separate function that gets called
whenever a vehicle command is available to always react on commands
and not just when already a task is running.
This solves e.g. commanding an Orbit when in Staibilized.
2021-01-17 15:46:30 +01:00
df54f938ef
FlightModeManager: correct setpoint struct initialization
...
It is important that setpoints get initialized with NAN and not overwritten
if specifically set by a successful flight task execution. It's then
clear if any setpoints were intentionally and successfully set.
Crucial for the position controller's emergency failsafe and the
seamless setpoint handover to the next flight task.
2021-01-17 15:46:30 +01:00
63db61a700
FlightModeManager: correct acceleration setpoint feedback naming
...
The variable was never renamed correctly in this in between layer when
we switched from normalized thrust to acceleration setpoints.
2021-01-17 15:46:30 +01:00
4d7b875ee2
flight_mode_manager: merge with flight_tasks
2021-01-17 15:46:30 +01:00
b1e442b830
vehicle_local_position: added bitfield for terrain estimate sensor info
...
- indicate how the distance to the bottom is estimated as this is important
to know in the context
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2021-01-17 12:06:59 +01:00
eaa2ae9dc9
ekf2: add param to enable synthetic mag Z fusion mode
2021-01-17 12:06:59 +01:00
983234e29d
ekf2: add param to set rng check hysteresis
2021-01-17 12:06:59 +01:00
195a900ecf
change default of RTL_LAND_DELAY to 0
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2021-01-17 12:05:30 +01:00
Matthias Grob