 Dennis Mannhart
|
cb9efd7119
|
mc_pos_control: remove unused defines and add SIGMA
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
352f86fff4
|
mc_pos_control reintegration fixes of duplicates, unused parameter and order
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
bf5e81a34f
|
mc_pos_control param: acceleration parameters adjustment and addition
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
10a9c410e3
|
mc_pos_control: parameter for maximum horizontal velocity
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
8eca82022c
|
mc_pos_control: sub param.acc with block param
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
44e4beeeec
|
mc_pos_control: check if triplets are valid, otherwise ignore
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
5b03c5f68e
|
navigator: reset triplets during onboard/offboard mission update
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
c84c7cdcb4
|
mc_pos_control: set previous triplet point to invalid when switching to manual
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
2ceb703613
|
mc_pos_control: use math::constrain
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
947d63fb11
|
mc_pos_control auto: replace min_cruise_speed with cruise_speed_90; take care of case when cruise_speed_90 is exactly in the middle of max and min
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
3538f028b4
|
mc_pos_control: use 0.5 of acceleration for auto
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
807d45c99c
|
mc_pos_control slowing down close to target take over previous setpoint if low
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
ac3321dc6c
|
mc_pos_control: distinguish between up and down acceleration
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
c1199d1202
|
mission don't apply slewrate for altitude
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
9ec0d72f3c
|
mc_pos_control: make sure that passing waypoint only allowed if altitude is reached
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
b769d1cee0
|
mc_pos_control auto: apply auto logic for z-direction
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
2655c72cea
|
mission: remove altitude foh for rotarywing
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
8e99c73f49
|
mc_pos_control: don't divide by zero
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
cb820a168a
|
mc_pos_control: use original targethreshold when computing target_velocity
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
08d15f5402
|
mc_pos_control: remove target threshold from auto
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
dbed42a720
|
mc_pos_control auto: ensure the order of cruise speeds during mission
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
3f73a56f5a
|
mc_pos_control: accelerate faster in auto and increase speed at 90degrees angle
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
540c0bdafb
|
mc_pos_control: accelerate faster
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
7a822c9db2
|
mc_pos_control: don't use slewrate in mission
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
267dbe9b7a
|
mc_pos_control: when close to current and previous, ajdust target velocity
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
0a37d8dc42
|
mc_pos_control: clarify speed params
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
9cfc57e4a6
|
mc_pos_control: rebase fix
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
3e4ab5ed59
|
mc_pos_control: when close to current and previous, ajdust target velocity
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
c4c18caed4
|
mc_pos_control auto: set speed at 90degrees to 1
|
2017-09-11 02:08:22 -07:00 |
|
|
Lorenz Meier
|
38f796f991
|
mc pos control: More sign checks
|
2017-09-11 02:08:22 -07:00 |
|
|
Lorenz Meier
|
a6108cc951
|
mc_pos_control: Use proper boundary checking when taking the norm of a vector
The previous method made too optimistic assumptions about the resolution of 32 bit floating point numbers.
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
4c4ee1af14
|
mc_pos_contol: sub eplsion with sigma, treat current behind independently
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
7734279f61
|
mc_pos_control: smooth transition between waypoint updates
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
3053b24761
|
mc_pos_control: auto remove min dist
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
8c5b1d33da
|
mc_pos_contol: add break when printing warning
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
13f8936cf1
|
mc_pos_control: warning for invalid thrust sp
|
2017-09-11 02:08:22 -07:00 |
|
|
Lorenz Meier
|
e58766c394
|
MC pos controller: log exceptions but rate-limit them
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
11a4410500
|
mc_pos_control: revert protection against nan thrust sp
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
dae1093bec
|
mc_pos_control: auto logic description and sanity check for thrust setpoint
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
6e5fe947fe
|
mc_pos_control: add clarification to auto function and auto angle computation
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
e51e52f425
|
mc_pos_control: reorder auto logic and ensure that nan gets caught
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
5d4486c920
|
mc_pos_control: only follow line if longer than 0.1
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
50e3c4067a
|
mc_pos_control: update _curr_pos_sp all the time
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
9dc5051504
|
mc_pos_control auto: use current velocity if smaller than velocity setpoint when slowing down
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
a84baa1dcc
|
mc_pos_control auto: adjust velocity only along track; use vector instead of point
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
2735280ffc
|
mc_pos_control auto: treat off the track differently depending on position
|
2017-09-11 02:08:22 -07:00 |
|
|
Dennis Mannhart
|
a7be9854d9
|
mc_pos_control: remove scaling in auto and remove limit_velocity function; update auto logic
|
2017-09-11 02:08:22 -07:00 |
|
|
Beat Küng
|
c82deaf26f
|
dataman: fix test for return value of px4_task_spawn_cmd
And destroy the semaphore if startup fails.
Credits for finding this go to @jeonghwan-lee
|
2017-09-11 02:04:27 -07:00 |
|
|
David Sidrane
|
694de32740
|
ROMFS::Removed ardrone_interface from PX4 only used PX4v1
Removed that driver was only referenced from the now depricated
px4fmuv-1
|
2017-09-10 13:37:23 -04:00 |
|
|
David Sidrane
|
ca9e323b13
|
ardrone_interface:Removed ardrone_interface from PX4 only used PX4v1
Removed that driver was only referenced from the now depricated
px4fmuv-1
|
2017-09-10 13:37:23 -04:00 |
|