b355c16141
Lanbao driver: correct rangefinder type to IR
2024-02-09 06:19:12 +01:00
7fdb5ef3cb
PWMOut/px4io: correct automatic servo/motor configuration messages
2024-02-09 06:19:12 +01:00
bf52d8adc9
drivers/uavcannode: add indicated airspeed
...
Signed-off-by: dirksavage88 <dirksavage88@gmail.com >
2024-02-06 11:01:15 -05:00
75d6e523b5
ICP201: Fix B2 version not return in bootup config
2024-02-02 09:37:18 -05:00
380841563f
ina238: set shunt calibration to desired value if readback is incorrect ( #22237 )
...
* refactor driver to dynamically check registers and do reset if register does not match desired value
* have seen various times where shunt calibration was reset in air
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2024-01-30 11:28:05 -05:00
df8a8af34c
ICP201: increase startup delay with B2 version
2024-01-30 10:06:28 -05:00
bc9ea95359
Update submodule GPSDrivers to latest Thu Jan 25 00:39:33 UTC 2024
...
- GPSDrivers in PX4/Firmware (12af7ff9904b2fdde39513c56a3e084eb23bcc7a): https://github.com/PX4/PX4-GPSDrivers/commit/63990d218ec35ea965d634af6a79d3155561b743
- GPSDrivers current upstream: https://github.com/PX4/PX4-GPSDrivers/commit/836b24c10e0ccd0067500f367686acac6d34882d
- Changes: https://github.com/PX4/PX4-GPSDrivers/compare/63990d218ec35ea965d634af6a79d3155561b743...836b24c10e0ccd0067500f367686acac6d34882d
836b24c 2023-12-11 bedaberner - ubx: fixed wrong mapping of ubx-sat-nav used parameter
Co-authored-by: PX4 BuildBot <bot@px4.io >
2024-01-24 21:48:40 -05:00
736a730bb1
src/drivers: new FT7 series wind/airflow sensor support ( #22471 )
...
- new uorb topic sensor_airflow
- log sensor_airflow optionally
2024-01-22 14:42:38 -05:00
3ff1f213a4
uavcan: add RelPosHeading->sensor_gnss_relative
2024-01-22 12:30:24 -05:00
db60bbc46b
dronecan: gps add noise, jamming, and spoofing data
2024-01-22 12:30:24 -05:00
2b69a3d290
VOXL2 specific drivers, modules, and miscellaneous support files ( #22588 )
2024-01-18 12:14:17 -05:00
b556d668f8
RCInput:Add Support for RX-TX SWAP using onewire
...
A board can optionaly define RC_SERIAL_SWAP_USING_SINGLEWIRE
If the board is wired board with TX to the input (Swapped) and
the SoC does not support U[S]ART level RX-TX swapping to allow
useing onewire to do the swap if and only if:
RC_SERIAL_SWAP_USING_SINGLEWIRE is defined
RC_SERIAL_SWAP_RXTX is defined
TIOCSSWAP is defined and retuns !OK
TIOCSSINGLEWIRE is defined
2024-01-16 17:09:26 -05:00
071565a8ad
Fix scaling issue with thoneflow/holybro optical flow pwm3901 UART driver
...
Signed-off-by: dirksavage88 <dirksavage88@gmail.com >
2024-01-09 22:08:09 +01:00
19d1941758
px4_fmuv6xrt: Switch to icm42686p on SPI1
...
icm42588p driver don't use a icm42688p when icm42686p is requested
2023-12-21 10:11:20 -05:00
c769fc7785
SF1xx: optionally disable sensor in forward flight
2023-12-13 09:02:26 +01:00
ece60b6165
msp_osd: reuse existing mode name conversion
...
This saves a bit of flash, keeps the mode names up to date and
works like expected.
2023-12-11 17:29:45 +01:00
ef0926d64b
Commander: add position slow mode
2023-12-08 21:17:59 +01:00
f703f07399
drivers/distance_sensor: update kconfig common sensors
...
- mappydot is EOL
- LL40LS_PWM is a fairly special case that's not common
2023-12-08 13:32:23 -05:00
1c25d65a1e
Add missing newline at the end of files
2023-12-01 13:11:00 -05:00
4c0b6dbe86
Remove trailing whitespaces and trailing duplicate newlines
2023-12-01 13:11:00 -05:00
9d465615d1
src/drivers/sw_crypto: Fix buffer lengths for xchacha20 crypto
...
The size input argument for monocypher crypto_xchacha20_ctr should be the
plaintext message length.
The promise of the interface is, that the call to encrypt_data updates the
ciphertext message length after the call succeeds.
The crypto should check that the output buffer length (cipher length) is
large enough to contain the encrypted data.
Fix these issues; these have gone unnoticed for a long time since the interface
has been only used by logger, and passing the same size for both in and out.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2023-11-29 20:56:00 -05:00
befbc19a4a
Roboclaw: Updated parameter prefix for roboclaw output module
2023-11-28 16:30:17 +01:00
c84185af96
Roboclaw: Fixed issue where parameters had different prefixes
2023-11-28 16:30:17 +01:00
9ce090f2da
Roboclaw: Fix CI pr issue
2023-11-28 16:30:17 +01:00
7c45093908
Roboclaw: Updated yaml file to support Roboclaw Driver in QGC
2023-11-28 16:30:17 +01:00
de9074558b
Roboclaw: Updated Airframe and fixed left and right mapping error
2023-11-28 16:30:17 +01:00
09d30568ab
Roboclaw: Consistent Left & Right naming convertion with Differential Drive class
2023-11-28 16:30:17 +01:00
f53edfa440
Roboclaw: major cleanup
2023-11-28 16:30:17 +01:00
c27181a154
Rename RoboClaw -> Roboclaw
...
The manufacturer uses both naming schemes, RoboClaw more than Roboclaw
but it's always one word and hence I think it's more consistent to name
it the latter.
2023-11-28 16:30:17 +01:00
87683aa790
Roboclaw: move parameters to module.yaml
2023-11-28 16:30:17 +01:00
8f4ce28e84
RoboClaw: declutter, make it compile again
2023-11-28 16:30:17 +01:00
5b4031356e
RoboClaw: fix style
2023-11-28 16:30:17 +01:00
a40120c332
Roboclaw: Integrated OutputModuleInterface including a large code refactor
2023-11-28 16:30:17 +01:00
86e5561a64
Roboclaw: Fixed issue when power cylcing the roboclaw where the driver would not connect
2023-11-28 16:30:17 +01:00
524fa73ad3
Roboclaw: rough refactor, removed repetitive code, simplified and clarified logic and error handeling
2023-11-28 16:30:17 +01:00
dde7bbb4f6
Roboclaw: Initial cleanup, next commit will be refactor removing the duplicated write and read functions
2023-11-28 16:30:17 +01:00
fe4d319ba9
Roboclaw: Replaced setDutyCycle with setMotorSpeed to allow for encoder data to get through (added support for encoders)
2023-11-28 16:30:17 +01:00
c7e780cb6d
Roboclaw: Working temporary version that drives around
2023-11-28 16:30:17 +01:00
184993daa3
Roboclaw: Added DutyCycle command in Roboclaw destructor to turn off motors
2023-11-28 16:30:17 +01:00
a857df88e4
Driving possible
2023-11-28 16:30:17 +01:00
ab486de430
Roboclaw: Temporary fix, enabling driver to run
2023-11-28 16:30:17 +01:00
549c6b565c
ported roboclaw driver from older commits into newest develop branch
2023-11-28 16:30:17 +01:00
5af6cf1889
Update submodule GPS Drivers to latest Tue Nov 28 00:39:22 UTC 2023
...
- GPS Drivers in PX4/Firmware (5ef3ae3f1ec5aecea5842306a63aec054eb599a9): https://github.com/PX4/PX4-GPSDrivers/commit/6e452c2c5b6a718dddc1df2a13eba4a7c729d9f2
- GPS Drivers current upstream: https://github.com/PX4/PX4-GPSDrivers/commit/63990d218ec35ea965d634af6a79d3155561b743
- Changes: https://github.com/PX4/PX4-GPSDrivers/compare/6e452c2c5b6a718dddc1df2a13eba4a7c729d9f2...63990d218ec35ea965d634af6a79d3155561b743
63990d2 2023-11-22 Daniel Agar - nmea fix astyle whitespace
Co-authored-by: PX4 BuildBot <bot@px4.io >
2023-11-27 21:05:23 -05:00
56bfe41f10
drivers/ins/vectornav: publish estimator_status (only in VN_MODE 1)
2023-11-22 21:42:27 -05:00
eefc6a0027
px4io:Added help text for supported command
2023-11-22 14:29:49 -05:00
5f8ecd6b40
driver: ina2** allow 3 indexes
2023-11-21 21:44:39 -05:00
dd2322d622
Added PerformanceModel for fixed wing ( #22091 )
...
* created a Performance Model for fixed wing vehicle
- added compensation for maximum climbrate, minimum sinkrate, minimum airspeed and trim airspeed based on weight ratio and air density
- added atmosphere lib to standard atmosphere calculations
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com >
Co-authored-by: Thomas Stastny <thomas.stastny@auterion.com >
2023-11-21 17:13:50 +01:00
a501262a6b
icm45686: fix dt (and usage command)
...
With the wrong dt, the flight behaviour was really poor and noisy, so
this fix is absolutely required.
Signed-off-by: Julian Oes <julian@oes.ch >
2023-11-21 07:44:00 +13:00
1b99e7df81
px4io: change not supported message to INFO instead of ERR
2023-11-20 08:54:32 -05:00
8f02184669
px4io:Add 'supported' command and uses it in rcS
2023-11-20 08:54:32 -05:00
Matthias Grob