The safetyButtonHandler() reports that the safety statatus
changed on the first loop iteration when safety is disabled which makes
sense to inform the system that safety is off but the tune for the user
should not be played because it interrupts the startup tune.
internal PX4IO safety_off state is removed and replaced with a normal safety button event. From this 'commit' commander is taking care of the PX4IO safety.
internal PX4IO safety_off state is removed and replaced with a normal safety button event. From this 'commit' commander is taking care of the PX4IO safety.
We use lockdown to prevent outputs like motors and servos from being
active in HITL simulation. This means that we can't treat the lockdown
flag as a flight_terminated, otherwise we can't arm in HITL at all.
I got multiple times the feedback now that a consistent delay
is helpful and makes sense but the default delay
is too long
for low battery action where you're trying to come back in time
and possibly the emergency reaction kicks in while the critical action
is executing which leads to a longer accumulated delay.
- add logic for detecting high wind speed in Commander,
and handle it toghether with wind speed warning
- trigger and enforce RTL if COM_WIND_MAX is breached
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Adds COM_FLT_TIME_MAX param and logic in Commander to enforce RTL when
flight time is above this value. User can only override to LAND mode,
but not proceed flight beyond that.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
If both local position and altitude were not valid, then both RC loss and
datalink loss would not trigger any failsafe at all, independently from
the configured action.
- set local home using global pos and global home
- set local home using GNSS pos and global home
- set global home using global ref of local frame and local home
- always try to set local or global home position when possible
- set global home with GNSS position if global pos from EKF isn't
available
- reset home when significantly moved from home before takeoff (checking
lpos or gpos or GNSS)
- reset home on takeoff transition
- reset home on mavlink arm command
- remove "home required accuracy" parameters, rely on validity flags
- In this case, no action is configured for datalink lost. Action is configured for RC lost.
- In case of no data link and no rc failsafe is enabled but reporting a "no_datalink" reason but "no_rc_and_no_datalink" seems more explicit.
Matthias Grob