cc9f1e81ad
Rejecting arming if safety switch is not in safe position, added reboot command
2013-08-15 09:52:22 +02:00
0bbc4b7012
Build fixes
2013-08-15 08:42:08 +02:00
50cf1c01b7
Compile fix.
2013-08-14 22:29:36 -07:00
33863165b2
Merge commit 'de749a3602423f5ee6ca56f3cf2dfff04e31ec6d' (kconfig-cleanup) into fmuv2_bringup
2013-08-14 21:23:00 -07:00
aebdd6e059
Merged master
2013-08-14 22:53:42 +02:00
27d0885453
gyro_calibration: confusing typo in mavlink message fixed
2013-08-14 22:38:14 +02:00
53def47216
Fixed gyro scale calibration (it was storing scale even though the scale calibration was skipped
2013-08-14 22:33:43 +02:00
d2f19c7d84
Merge pull request #354 from jean-m-cyr/master
...
Support initiating DSM bind via QGroundControl
2013-08-14 12:43:59 -07:00
9505654f91
commander/px4_custom_mode.h added
2013-08-14 17:57:01 +02:00
01d354effc
Merge pull request #355 from PX4/kconfig-cleanup
...
Kconfig cleanup
2013-08-14 08:35:01 -07:00
3a21cacdbb
Fix bug where IO was in override mode for copter (workaround was to disconnect and reconnect Rx
2013-08-14 16:00:35 +02:00
29d7836784
RGBled fixes: options and off after rgb working now
2013-08-14 15:03:52 +02:00
3b10f8431d
rgbled: try expansion bus first, unless specific bus given
...
this will allow "rgbled start" to detect which bus the LED is on,
supporting boards with either external or internal LEDs
2013-08-14 15:02:35 +02:00
21a919d973
rgbled: added LED_MODE_RGB to allow for constant RGB values
...
this allows apps to fully control the 3 LED elements
2013-08-14 15:02:15 +02:00
e14d034528
Merge branch 'master' of github.com:PX4/Firmware into fmuv2_bringup
2013-08-14 14:58:02 +02:00
d7730a3444
commander, mavlink: fixed base_mode and custom_mode in mavlink
2013-08-14 10:59:22 +02:00
de749a3602
Stop expecting CONFIG_HRT_anything since we aren't baking it into the NuttX config anymore.
2013-08-13 00:34:41 -07:00
cd928b64f3
Fixed log conversion scripts copy operation. Each log comes now with the required conversion tools. Eats up only 10 KB flash for the good cause.
2013-08-13 09:10:47 +02:00
0025e9ca90
Hotfix: Copy a current version of the log conversion tools to each log directory
2013-08-13 07:57:39 +02:00
0b93555043
Tell mavlink about bind results
2013-08-11 21:16:55 -04:00
35ec651cee
Remove unused IOCTLs
2013-08-11 18:07:25 -04:00
828626ee01
Merge pull request #347 from jgoppert/md25_dev
...
Segway Controller
2013-08-11 14:23:25 -07:00
1d408b80ad
Support DSM bind via QGroundControl
2013-08-11 17:19:54 -04:00
083cc60acb
Increased logging to 200 Hz in F330 startup for v2, allowed to set up to 333 Hz update rate in IO driver for v2 link
2013-08-11 18:42:20 +02:00
42b4961781
Reduced excessive IO stack size (had 4k, is using 0.7k, has now 2k)
2013-08-11 16:54:24 +02:00
cbb5ce8f59
Fixed startup behavior for PX4 autostart
2013-08-11 16:54:00 +02:00
36679fbb39
Some DSM satellites are fussier about bind pulse timing
...
These values work better
2013-08-10 11:22:08 -04:00
dccdc977d5
Made accel / gyro self tests aware of offsets and scales, added support to config command to call these
2013-08-09 17:56:32 +02:00
32439d748a
commander: set mode using base_mode and custom_mode
2013-08-07 20:21:49 +02:00
547a747752
Merged commit disabling FIFO in L3GD20
2013-08-07 15:40:43 +02:00
40c56ab61e
Corrected bug in px4io driver that lead to hang of FMU-IO communication
2013-08-06 21:10:41 +02:00
0012b39b37
Merge branch 'master' of github.com:PX4/Firmware into fmuv2_bringup
2013-08-06 09:54:14 +02:00
28fa96e2db
Made sure airspeed tests reset the sensors to default state
2013-08-06 09:53:52 +02:00
46fd904b5a
px4io: include board_config.h
...
without this we don't get the I2C interface built for PX4IO
2013-08-06 09:21:59 +02:00
461b2eb366
Merge branch 'mpu6k_queue' of github.com:PX4/Firmware into fmuv2_bringup
2013-08-06 09:15:24 +02:00
338e506a28
mpu6000: set the default DLFP filter to 42Hz
...
this allows for apps to ask for slightly higher filters with the
software filter and not have it completely ruined by the on-chip DLPF
2013-08-06 09:07:12 +02:00
ca9a11a586
Indendation fixes
2013-08-05 23:09:02 +02:00
cfd737aa73
Made sensors startup routine more flexible
2013-08-05 21:08:19 +02:00
a2f923b9a3
Increased MPU6K poll and sampling rate to 1 KHz
2013-08-05 21:05:34 +02:00
b5d19d08ea
Equipped MPU6k driver with Butterworth for accel and gyro
2013-08-05 21:05:08 +02:00
86e5d39b89
Merge branch 'master' of github.com:PX4/Firmware into mpu6k_queue
2013-08-05 20:11:44 +02:00
58a4c5d544
Added missing include for MS5611
2013-08-05 16:32:59 +02:00
901a9c3e35
Hotfix: MEAS Airspeed sensor fixes from Sarthak Kaingade
2013-08-05 12:44:38 +02:00
5ddbe24d8e
Fixed code style for meas_airspeed.cpp
2013-08-05 12:26:31 +02:00
1acbbe46d1
Make it possible to create a cdev without automatically creating a device node.
2013-08-04 19:49:19 -07:00
1fb4705ab7
Add size and flush methods to the ringbuffer class.
2013-08-04 19:48:46 -07:00
4b4f33e6a4
Add direct-access methods to the base Device class, so that there's a common way of talking to drivers regardless of which of the specialised classes they derive from.
...
Make the Device destructor public and virtual, so that arbitrary devices can be deleted. Likewise for classes that derive from it.
Make Device::init public so that arbitrary devices can be initialised after being returned by factories.
2013-08-04 19:48:20 -07:00
567f621754
Fix an issue with the pwm_servo driver when using one of the STM32 advanced timers.
2013-08-04 19:43:05 -07:00
c33048b521
Add the ability to cancel a begin/end perf counter if the begin turns out to have been in error.
2013-08-04 19:42:16 -07:00
97e4909d9e
Improvements to the HX stream protocol implementation.
2013-08-04 19:40:57 -07:00
Lorenz Meier