9c70946bf7
Merge branch 'gps_utc' of github.com:bansiesta/Firmware
2015-01-04 11:53:31 +01:00
88022110d0
Fix integer constants in mavlink app
2015-01-04 11:52:32 +01:00
25fc9d791a
renaming of gps time to UTC time
2015-01-04 10:43:28 +00:00
5439aa12c0
Merge pull request #1505 from mhkabir/timesync
...
Timesync
2015-01-04 11:41:44 +01:00
4cc7f599d1
ashtech: whitespace
2015-01-04 10:40:39 +00:00
3c99becada
SMBus battery driver: Remove console print on normal block read operation
2015-01-04 11:04:55 +01:00
1106e0bff3
SMBus battery driver: further code style fixes
2015-01-04 11:02:53 +01:00
17e4e283d8
SMBus battery driver: Stylize according to style guide
2015-01-04 10:58:45 +01:00
f48abafbc9
GPS driver: Set RTC from Ashtech receivers as well
2015-01-04 10:45:20 +01:00
50a00bee8e
GPS driver: UBX time handling for all protocol revisions
2015-01-04 10:45:20 +01:00
96a8003826
Merge pull request #1517 from rowoflo/patch-1
...
Fixed loop limit errors in Matrix.h
2015-01-04 01:34:01 +01:00
c241fca8fe
Merge branch 'matrix_tests' of github.com:dagar/Firmware
2015-01-04 01:32:46 +01:00
a62baf2cb2
add simple nonsymmetric Matrix testing to test_mathlib
2015-01-03 18:55:55 -05:00
c1f89dbd5c
GPS driver: Check return value of settime and notify shell if call fails
2015-01-04 00:08:04 +01:00
48a8ea7f19
GPS driver: Fixed implicit cast causing time logic errors. Found by @Zefz
2015-01-04 00:07:42 +01:00
2a95b4a9b8
GPS: Update the RTC even when RTC is enabled
2015-01-03 19:05:42 +01:00
dc7ee4247f
HMC5883 startup: Ensure sensor configuration is always performed
2015-01-03 17:54:49 +01:00
f99c29c50c
Dev info: Reflect address changes
2015-01-03 17:54:49 +01:00
268cf7efc5
HMC5883: Fix I2C operation
2015-01-03 17:54:48 +01:00
f3e3565d1b
sensors app: Decent error handling / reporting
2015-01-03 17:54:48 +01:00
dd165100fb
Support for HMC5983, which can also be attached via SPI
2015-01-03 17:54:48 +01:00
ebc4cc3a7d
sdlog2: Adjust frame size warning limit, cross-checked stack size of app
2015-01-02 12:28:23 +01:00
f28e8d6731
sdlog2: Adjust frame size
2015-01-02 12:28:23 +01:00
1f81a8bd61
2nd baro support for common topics
2015-01-02 12:28:23 +01:00
a12ac452a1
Objects common
2015-01-02 12:28:22 +01:00
f5b6b83161
Added 2nd baro to sensor combined topic
2015-01-02 12:28:22 +01:00
08297db39a
Support for 2nd baro
2015-01-02 12:28:22 +01:00
d20ebd7390
Add logging for 2nd baro
...
Conflicts:
src/modules/sdlog2/sdlog2_messages.h
2015-01-02 12:28:22 +01:00
4c3ebee15b
Hackery on option parsing to make MS5611 comply
2015-01-02 12:28:22 +01:00
a77c9225df
Allow access to both device handles, make external use a special handle
2015-01-02 12:28:21 +01:00
bf134e6979
Allow to get access to dev name
2015-01-02 12:28:21 +01:00
2effc9a23d
MS5611: Allow two instances
2015-01-02 12:28:21 +01:00
500ac1443b
lsm303d: detect large fixed values and report an error
...
we have logs where the lsm303d gets large fixed values for long
periods. This will detect that error case and raise error_count so the
higher level sensor integration code can choose another sensor
2015-01-02 16:47:48 +11:00
a0e1255e28
Merge pull request #1543 from thomasgubler/rcparamtune
...
RC param tune
2015-01-01 18:15:28 +01:00
a7bc38869e
added pitch trim for vtol in fixed wing mode
2015-01-01 14:51:18 +01:00
7b6620b319
ll40ls: fixed exit code on external sensor startup failure
2015-01-01 13:06:46 +01:00
8470105f9e
lsm303d: fixed build warning
2015-01-01 10:04:09 +11:00
7864958f1c
l3gd20: fixed build warning
2015-01-01 10:04:07 +11:00
82b9e08e4c
mpu6000: removed unsafe printf in interrupt context
...
instead delay 3ms between register writes. This seems to give a quite
high probability of correctly resetting the sensor, and does still
reliably detect the sensor going bad, which is the most important
thing in this code
2015-01-01 08:51:57 +11:00
b5f6fedfa8
lsm303d: show all perf counters in "info"
2015-01-01 08:51:54 +11:00
083d9e3e69
lsm303d: check DRDY after check_registers()
...
this allows recovery from a state where DRDY is not set
2015-01-01 08:51:52 +11:00
1de7fab974
lsm303d: removed unsafe printf in interrupt context
2015-01-01 08:51:49 +11:00
e4318345f3
lsm303d: added two more checked registers
...
these are key for DRDY behaviour
2015-01-01 08:51:47 +11:00
2ac3a6fcf4
l3m303d: added testerror command
...
useful for testing error handling
2015-01-01 08:51:44 +11:00
5c1da70d0c
l3gd20: fixed reporting of error count
2015-01-01 08:51:42 +11:00
1bb3974c84
l3gd20: check DRDY after check_registers() is called
...
this allows us to recover from an error that disables data ready
2015-01-01 08:51:40 +11:00
8db2066151
l3gd20: removed printf in interrupt context
...
this is not safe
2015-01-01 08:51:37 +11:00
353ea9beac
l3gd20: added testerror command
...
useful for testing error handling
2015-01-01 08:51:34 +11:00
72eafad510
introduced vtol_fw_permanent stabilization: allows vtol to be attitude-stabilized in manual mode
2014-12-31 16:40:16 +01:00
57ca716402
Merge pull request #1513 from PX4/isvtol
...
is_vtol flag in vehicle_status
2014-12-31 14:01:18 +01:00
Lorenz Meier