99921db5cf
Temporary (or not) fix calibration failure due
...
Due to the uOrb publishing rate difference beteen the mpu9250 driver and
the mpu6000 driver on the ICM-20608-G. The latter driver has an integrator output
the limit the publishing rate
2015-11-24 11:37:39 +01:00
2ce6988436
Merge pull request #3253 from DroneBuster/quad_h
...
Mixer for H configuration
2015-11-23 21:38:17 +01:00
27b1637559
Mixers: add mixer for H configuration
2015-11-23 22:00:56 +02:00
4ee04e3530
multirotor mixer: add H configuration
2015-11-23 22:00:28 +02:00
6d842bd432
Merge pull request #3184 from PX4/takeoff_detect
...
Takeoff detect
2015-11-23 10:51:19 +01:00
a9d26af9a5
Travis CI: Do not copy UAVCAN binary
2015-11-22 13:58:12 +01:00
2f75e4adc3
Camera trigger: Use smaller default stack for shell handler
2015-11-22 12:34:22 +01:00
c0d04592b3
Merge pull request #3246 from PX4/sitl_shell_fix
...
SITL shell: do not save command if it replicates the previous one
2015-11-22 10:43:58 +01:00
de22fd4b4b
SITL shell: do not save command if it replicates the previous one
2015-11-22 09:40:17 +01:00
b398064d55
Merge pull request #3232 from PX4/master_mpu9250_add_integration
...
Added the integration like on mpu6000
2015-11-21 12:30:01 +01:00
e41c3cf876
Missing Close es and poll rate reset
2015-11-21 01:09:58 -10:00
ca5b854ce8
Merge pull request #3238 from PX4/pwm_out_sim_fix
...
properly assign struct member
2015-11-21 11:01:05 +01:00
275761f3d5
properly assign struct member
2015-11-20 23:32:53 +01:00
9f89426d5e
Merge pull request #3227 from thiemar/uavcan_param_save_fix
...
Don't call param_opcode unless there are dirty nodes [resolves PX4/Firmware#3160 ]
2015-11-20 22:32:14 +01:00
aad434831e
Merge pull request #3230 from thiemar/uavcan_param_count_fix
...
Fix off-by-one error in parameter count [resolves PX4/Firmware#3162 ]
2015-11-20 22:32:01 +01:00
c9133b26f1
Merge pull request #3229 from PX4/mc_pos_alt_fix
...
Mc pos alt fix
2015-11-20 20:57:16 +01:00
c1411fdd8e
Merge pull request #3233 from PX4/topic_listener
...
unsubscribe from topic to prevent overflow in device handler list
2015-11-20 18:31:31 +01:00
3337eb8f1a
unsubscribe from topic to prevent overflow in device handler list
2015-11-20 16:09:49 +01:00
6bab225fed
Added the integration like on mpu6000
2015-11-20 04:17:24 -10:00
719440fe4d
Merge pull request #3231 from PX4/airspeed_fix
...
ekf: use airspeed directly, the other thing was just wrong
2015-11-20 15:03:32 +01:00
333d6ea12f
ekf: use airspeed directly, the other thing was just wrong
2015-11-20 14:59:53 +01:00
442c0d47ef
Fix off-by-one error in parameter count [ resolves PX4/Firmware#3162 ]
2015-11-20 23:32:54 +11:00
5303a63da0
mc_pos_control: code formatting
2015-11-20 13:16:42 +01:00
ff5db6b1be
fixed alt hold bug
2015-11-20 13:10:46 +01:00
a27a6acb54
Don't call param_opcode unless there are dirty nodes [ resolves PX4/Firmware#3160 ]
2015-11-20 22:29:40 +11:00
1f33451690
POSIX: Fix code style
2015-11-20 09:46:05 +01:00
3c8a52a72b
POSIX shell: Fix enter handling
2015-11-20 09:23:57 +01:00
4606bc927e
Fix SITL / jMAVSim with correct start script
2015-11-20 09:23:39 +01:00
71320ac0fe
Commander: Add decimal hints
2015-11-20 09:01:15 +01:00
96b3239ce7
Merge pull request #3225 from PX4/master_commander_stack_size
...
BUGFIX:Take 2! CLI "commander calibrate acel" resulted in hardfault
2015-11-19 23:27:18 +01:00
d5c89c5392
BUGFIX:Take 2! CLI "commander calibrate acel" resulted in hardfault
...
Processes: 20 total, 4 running, 16 sleeping
CPU usage: 65.19% tasks, 0.56% sched, 34.24% idle
Uptime: 387.573s total, 135.045s idle
PID COMMAND CPU(ms) CPU(%) USED/STACK PRIO(BASE) STATE
0 Idle Task 135045 34.242 0/ 0 0 ( 0) READY
1 hpwork 7495 1.693 956/ 1592 192 (192) w:sig
2 lpwork 1576 0.376 572/ 1592 50 ( 50) w:sig
3 init 1655 0.000 1404/ 2496 100 (100) w:sem
170 top 9 0.000 1204/ 1696 100 (100) RUN
87 dataman 1 0.000 652/ 1192 90 ( 90) w:sem
105 sensors 31810 8.090 1644/ 1992 250 (250) w:sem
107 gps 1217 0.000 708/ 1192 220 (220) w:sem
109 commander 49016 17.027 3412/ 3596 215 (215) w:sig +100 184 head room
114 mavlink_if0 2607 0.564 2092/ 2392 100 (100) READY
115 mavlink_rcv_if0 27 0.000 804/ 2096 175 (175) w:sem
122 sdlog2 849 0.188 2068/ 2992 70 ( 70) READY
125 commander_low_prio 4678 0.000 2740/ 2872 50 ( 50) w:sem +200 132 head room
142 attitude_estimator_q 65555 16.933 1956/ 2096 250 (250) w:sem
144 position_estimator_inav 23877 6.208 4588/ 4992 250 (250) w:sem
148 mc_att_control 31210 7.902 1132/ 1496 250 (250) w:sem
150 mc_pos_control 2901 0.658 1044/ 1496 250 (250) w:sem
155 navigator 2219 0.470 828/ 1496 105 (105) w:sem
165 mavlink_if1 21195 5.079 2156/ 2392 100 (100) w:sig
167 mavlink_rcv_if1 116 0.000 1236/ 2096 175 (175) w:sem
2015-11-19 11:44:09 -10:00
7cc6674bad
Merge pull request #3221 from PX4/master_macro_wrap
...
BUGFIX: Multiple PREFLIGHT FAIL: xxx messages - multiline macros not…
2015-11-19 19:19:14 +01:00
c51f414b22
Vehicle status remove unused field
2015-11-19 19:09:42 +01:00
19fc766c7d
Merge pull request #3223 from PX4/master_commander_stack_size
...
BUGFIX:CLI "commander calibrate acel" resulted in hardfault
2015-11-19 19:04:51 +01:00
2ffccc5c9f
BUGFIX:CLI "commander calibrate acel" resulted in hardfault
2015-11-19 07:50:45 -10:00
e326e190cb
BUGFIX: Multiple PREFLIGHT FAIL: xxx messages - multiline macros not wrapped in do/while
2015-11-19 07:47:11 -10:00
7a5391a723
Commander: Fix preflight check reporting and simplify logic
2015-11-19 18:28:16 +01:00
f2b988dcaa
Fix error reporting logic
2015-11-19 17:48:39 +01:00
173edcef63
Commander: Fix reporting in presence of no telemetry link
2015-11-19 16:33:56 +01:00
ca125bccbd
Update error message
2015-11-19 16:03:36 +01:00
c77c0f927b
Gyro cal: be more forgiving in calibration offset
2015-11-19 15:54:57 +01:00
8b70bd2487
Commander: Increase stack for commandline calibration
2015-11-19 15:53:32 +01:00
020844e9e9
Gyro: also output to console
2015-11-19 15:53:08 +01:00
08fd4c8eb9
Merge pull request #3216 from PX4/listener
...
topic_listener: allow listening to actuator control groups
2015-11-19 10:05:31 +01:00
ab92ed35a6
Merge pull request #3215 from PX4/sitl_shell
...
implemented better shell for SITL
2015-11-19 09:31:48 +01:00
a8ab52b444
topic_listener: allow listening to actuator control groups
2015-11-19 09:13:44 +01:00
5103ba1c23
implemented better shell for SITL
2015-11-19 09:09:51 +01:00
b156519468
Merge pull request #3210 from PX4/tailsitter_gazebo
...
Tailsitter gazebo
2015-11-18 17:39:14 +01:00
0fa0654f5a
sitl_gazebo cleanup
2015-11-18 16:11:11 +01:00
16aa852c53
merged master into sitl_gazebo
2015-11-18 16:11:10 +01:00
David Sidrane