98cff94702
px4_work_queue: directly support SITL lockstep
...
- the purpose is to ensure that every WorkItem (and WorkItems scheduled
by WorkItems) is allowed to run to completion every step
- per workqueue register a lockstep component whenever a work item is
added (if not already registered)
- once the work queue is empty unregister component
2021-01-04 09:38:05 +01:00
8c71ecd97e
Update submodule ecl to latest Sat Jan 2 12:39:29 UTC 2021
...
- ecl in PX4/Firmware (03925cc70fd13c15a5dfe8ecc5653b91098ac68d): https://github/commit/18f334f4dbca61e3bcd1743c22cf820b5a8ff7ef
- ecl current upstream: https://github/commit/78ce46f00777f07d24c31bdc5e2edb203be2c0f4
- Changes: https://github/compare/18f334f4dbca61e3bcd1743c22cf820b5a8ff7ef...78ce46f00777f07d24c31bdc5e2edb203be2c0f4
78ce46f
2021-01-02 11:54:56 -05:00
d502292d07
mission: for vtol takeoff don't use next waypoint as target during transition
...
- this caused the navigator to use the next waypoint (after the vtol takeoff item)
to be used as target during the transition. If the altitude of that waypoint
was much higher than the takeoff altitude then there were FOH effects
after the transition which caused the vehicle to first descend before
climbing again.
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2021-01-02 02:18:59 +01:00
0bdae5745a
Update dsm.cpp
...
Fix documentation comment (reported by @Roman-, thanks!)
2021-01-01 15:30:25 +01:00
9409122638
RC tests: Add new test file
...
This file is using a PX4IO-bound receiver on a DX9
2021-01-01 14:26:36 +01:00
8d6239f11f
PX4IO: Use DSM frame drops
...
These will now be reported the same as on SBUS.
2021-01-01 14:26:36 +01:00
47fcf97442
DSM: Report frame drops
...
Frame drops were measured but not reported on PX4IO.
2021-01-01 14:26:36 +01:00
95dd2f7e8d
rc/dsm: remove system field check, add new validity checks
...
- unfortunately we can't depend on the system field due to potential
external binding and non-genuine Spektrum equipment
- reject any DSM frame with duplicate channels
- add 16 channel mask
- tighten valid PWM range 990-2010us (±100% travel is 1102-1898µs)
- update RCTest rejected frame count
2021-01-01 14:26:36 +01:00
a444d2610a
Spektrum passive power: Only use if present
2020-12-31 13:22:52 +01:00
641cc33d79
RC input: Always report DSM state
2020-12-31 13:22:52 +01:00
6529e1444f
RC input: Better monitoring
...
The output is now less confusing in terms of which protocol is currently active.
2020-12-31 13:22:52 +01:00
af28a298e5
DSM driver: Add option for passive power controls
2020-12-31 13:22:52 +01:00
4237c8be25
Commander: Do not acknowledge binding
...
This is now done in the respective modules directly and based on implementation and execution state.
2020-12-31 13:22:52 +01:00
2d1551e5bf
PX4IO: Acknowledge binding
2020-12-31 13:22:52 +01:00
8445a08bff
RC input: Acknowledge binding (or indicate that feature is not implemented)
2020-12-31 13:22:52 +01:00
44bdd5456f
PX4IO: Bind if not armed
...
DSM binding was disabled before if safety was off, which on a lot of multicopters is today the default. The logic is now checking instead for wether the system is armed.
2020-12-31 13:22:52 +01:00
a34e57a4cc
Simulator: Increase stack, publication affinity
...
This commit increases the send thread stack size and changes the thread affinity of the lockstep clocking topic. It also improves verbosity in case error states occur.
2020-12-31 01:05:30 +01:00
fda63f802e
Tone alarm: Adjust log levels
...
The earlier log levels represented normal operation scenarios as errors, this aligns the log levels.
2020-12-31 01:05:30 +01:00
e27d80abc4
Camera feedback: Indicate success
...
If the feedback module is loaded then we want to provide capture feedback.
2020-12-30 23:36:47 +01:00
fe2e299046
FlightModeManager: small rebase change
...
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2020-12-30 10:25:08 -05:00
e92795b474
Temporary logging addition to debug CI
2020-12-30 10:25:08 -05:00
fafbb687d8
FlightModeManager: fix integral reset on ground
...
This information could also be used for yaw and integral
resets of the lower level controllers.
2020-12-30 10:25:08 -05:00
7de288877a
MulticoperPositionControl: 3rd pass get rid of zombie members
2020-12-30 10:25:08 -05:00
62ada2e2dc
FlightModeManager: restore weathervane calls
...
I had to do an extra subscription to the vehicle attitude.
I don't know how to test this.
2020-12-30 10:25:08 -05:00
aa888223f0
FlightModeManager: fix takeoff state in stabilized mode
2020-12-30 10:25:08 -05:00
8edb06e94f
FlightModeManager: make sure emergency failsafe works
2020-12-30 10:25:08 -05:00
8329208b84
FlightModeManager: fix takeoff ramp from zero
2020-12-30 10:25:08 -05:00
88c274b3cd
MulticopterPositionControl: 2nd pass to move to FlightModeManager
2020-12-30 10:25:08 -05:00
f52bad87e2
mc_pos_control: separate out flight_tasks (into FlightModeManager)
2020-12-30 10:25:08 -05:00
fa7170bc4f
Add FlightModeManager
...
to separate out setpoint generation from controllers
2020-12-30 10:25:08 -05:00
49d4cc7d5b
commander: CMD_NAV_LAND/CMD_NAV_PRECLAND reply RESULT_ACCEPTED unless transition is denied
2020-12-30 12:05:41 +01:00
91f5f26618
commander: main_state_transition call trivial style fixes
2020-12-30 00:26:14 +01:00
4f62355dec
msg: new estimator_status_flags message for more accessible ekf2 status logging
...
- log all estimator (ekf2) flags as separate booleans in a new dedicated low rate message (only publishes at 1 Hz or immediately on any change)
- this is a bit verbose, but it avoids the duplicate bit definitions we currently have across PX4 msgs, ecl analysis script, flight review, and many other custom tools and it's much easier for casual log review in FlightPlot, PlotJuggler, csv, etc
- for compatibility I've left estimator_status filter_fault_flags, innovation_check_flags, and solution_status_flags in place, but they can gradually be removed as tooling is updated
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com >
2020-12-29 11:27:21 -05:00
adb98d5702
mavlink: move HIL_ACTUATOR_CONTROLS to separate streams header
2020-12-28 11:09:46 +01:00
3b20310e9c
mavlink: move POSITION_TARGET_GLOBAL_INT to separate streams header
2020-12-28 11:09:46 +01:00
672a1c90aa
mavlink: move POSITION_TARGET_LOCAL_NED to separate streams header
...
- position type_mask
2020-12-28 11:09:46 +01:00
6b1d02feb7
mavlink: move RC_CHANNELS to separate streams header
2020-12-28 11:09:46 +01:00
48be6962d1
mavlink: move MANUAL_CONTROL to separate streams header
2020-12-28 11:09:46 +01:00
629d03b684
mavlink: move TRAJECTORY_REPRESENTATION_WAYPOINTS to separate streams header
2020-12-28 11:09:46 +01:00
5762c3b356
mavlink: move NAV_CONTROLLER_OUTPUT to separate streams header
2020-12-28 11:09:46 +01:00
9f57df75e8
remove rotation 41 (ROLL_270_YAW_180)
...
- duplicate of 31 (ROLL_90_PITCH_180)
2020-12-28 11:07:08 +01:00
a66cb0cbaf
mavlink: check TX buffer before processing command ack
2020-12-28 11:05:42 +01:00
8d5813994f
format smart battery serial number as string on mavlink
...
according to change on mavlink protocol message
formatted as 'dd/mm/yy-123456'
2020-12-28 11:04:54 +01:00
ceadcd74d0
mavlink: CAMERA_TRIGGER stream check free tx buf before send
2020-12-28 11:03:53 +01:00
ae706537b8
mavlink: CAMERA_IMAGE_CAPTURED stream check free tx buf before send
2020-12-28 11:03:53 +01:00
27b631e827
mavlink: ADSB_VEHICLE stream check free tx buf before send
2020-12-28 11:03:53 +01:00
0d72b47571
mavlink: COLLISION stream check free tx buf before send
2020-12-28 11:03:53 +01:00
dcb897307d
mavlink: HEARTBEAT stream check free tx buf before send
2020-12-28 11:03:53 +01:00
e06d218ff2
commander: disable arm_auth request for prearm status continuous publication
2020-12-27 16:23:05 -05:00
02a08c42b7
tests: perf don't bother printing all perf counters
2020-12-27 15:29:45 -05:00
Daniel Agar