Daniel Agar
6d0339ba0c
I2CSPIDriverBase: sensor start failure ERROR if internal, WARN if external
2021-12-28 11:05:35 -05:00
Daniel Agar
990d7c159d
pwm_out: cleanup and prep for linux compatibility
2021-12-28 11:04:00 -05:00
Daniel Agar
98d706772e
boards: px4_fmu-v2_rover disable events module to save flash
2021-12-24 20:06:13 -05:00
Beat Küng
9bc9169b77
px4/fmu-v5x: add missing board variants to rc.board_mavlink
2021-12-24 20:06:13 -05:00
Beat Küng
6c8f322dfe
px4/fmu-v2/test: disable modules to reduce flash
2021-12-24 20:06:13 -05:00
Beat Küng
8743b78474
px4/fmu-v2/rover: disable modules to reduce flash
2021-12-24 20:06:13 -05:00
Julian Oes
9686c81f7d
boards: enable flow control on CDCACM
...
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.
The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.
The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4. For more information about the issue, see:
apache/incubator-nuttx#3633
As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
2021-12-21 08:01:38 +01:00
Beat Küng
87ec8839c4
px4/fmu-v5x: remove unused base_phy_DP83848C build variant
2021-12-10 09:03:08 -05:00
Beat Küng
ca6df035b4
px4/fmu-v5x: add arch_io_pins dependency (required in init.cpp)
2021-12-10 09:03:08 -05:00
Daniel Agar
8185e2a384
boards: board_app_initialize() don't return early on failure
...
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
2021-12-09 20:41:54 -05:00
Cindy Hsieh
ca90c785e9
correct pin in the comment, no code changed
2021-12-09 20:40:34 -05:00
Daniel Agar
3160e7a3cd
Jenkins: run calib_udelay on test rack
2021-12-05 19:42:10 -05:00
Daniel Agar
713350930d
boards: px4_fmu-v5 add test variant
2021-12-05 18:08:54 -05:00
Daniel Agar
a2064cceff
boards: enable early MPU reset on any board potentially not using the PX4 bootloader
2021-12-01 20:13:41 -05:00
Peter van der Perk
36ba8cc6dd
UAVCANv1 update FMU-V5 config
2021-12-01 09:29:15 -05:00
David Sidrane
df1c94dd4e
px4_fmu-v5_debug:Increase stack size
2021-11-29 16:01:08 -05:00
Jukka Laitinen
c2cbab1e98
Improve stub_keystore configuration
...
It is possible to either set the keyfile locations in board configuration or
with the same environment variables as before.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2021-11-29 11:09:51 -05:00
Daniel Agar
9b7c8c8a8b
boards: px4_fmu-v6x_default enable ethernet by default with NuttX optimizations
2021-11-29 09:08:42 -05:00
Daniel Agar
b9152dc4d0
boards: px4_fmu-v5x_default increase ETH pktsize to max and enable tcp delayed ack
2021-11-29 09:08:42 -05:00
Daniel Agar
0459b73520
boards: px4_fmu-v5x enable mavlink ethernet by default
2021-11-29 09:08:42 -05:00
David Sidrane
23c73d4e0b
px4_fmu-v6x nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
51b55533af
px4_fmu-v6u nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
b8bdf7e1c4
px4_fmu-v5x nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
3504541ebd
px4_fmu-v5x base_phy_DP83848C:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
60229c28a8
px4_fmu-v5 uavcanv1:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
01681d6b47
px4_fmu-v5 stackcheck:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
32c2160137
px4_fmu-v5 nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
cf36435ed3
px4_fmu-v5 debug:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
a6bc41ef75
px4_fmu-v5 cryptotest:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
0951b9b1e7
px4_fmu-v4pro nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
e957ebac56
px4_fmu-v4 nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
c3ae713ec1
px4_fmu-v3 nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
394b431364
px4_fmu-v2 nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
228a0ac5ed
px4_fmu-v6u:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32
2021-11-24 09:46:23 -05:00
David Sidrane
3f67ece322
px4_fmu-v5:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32
2021-11-24 09:46:23 -05:00
David Sidrane
53b579a79d
px4_fmu-v5x:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32
2021-11-24 09:46:23 -05:00
David Sidrane
c391d6793c
px4_fmu-v6x:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32
2021-11-24 09:46:23 -05:00
Beat Küng
db2a1e5fee
px4/fmu-v2: disable modules to reduce flash
2021-11-23 12:40:22 -05:00
Beat Küng
4c03def6e9
boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST
2021-11-23 12:40:22 -05:00
Daniel Agar
c95dbfd7ac
boards: px4_fmu-v5_debug disable debug fs errors
2021-11-22 11:27:45 -05:00
Daniel Agar
f058cbd0e0
boards: px4_fmu-v5_debug disable CONFIG_DEBUG_I2C
2021-11-22 11:27:45 -05:00
Daniel Agar
25846f48c4
boards: px4_fmu-v2/v3 use SPI bus power off rather than full reset
2021-11-22 11:27:45 -05:00
Daniel Agar
f5d9b01f5c
NuttX build in place
...
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
Daniel Agar
7b7b7acd36
i2c_spi_buses: respect CONFIG_I2C and CONFIG_SPI
...
- bmp280, dps310, and ms5611 barometers support boards without I2C
2021-11-15 15:57:33 -05:00
Daniel Agar
2d816e0b3e
[WIP] manual_control selector hacks
2021-11-09 16:05:25 +01:00
Daniel Agar
a8c3bcca32
boards: disable CONFIG_STM32H7_SPI_DMATHRESHOLD
2021-11-08 19:20:47 -05:00
Peter van der Perk
c6f249f7f1
Kconfig merge_config only set to 'n' when BOOL
...
Run make updateconfig to fix delta's of derived configs
2021-11-02 09:34:21 -04:00
Beat Küng
8476875b4d
Kconfig: add missing serial ports
2021-10-27 08:03:55 +02:00
bresch
6ec9ab11f2
add fw auto-tune module to board configs
2021-10-25 13:41:31 +02:00
Daniel Agar
19952768fb
boards: try to keep test boards in sync
2021-10-21 15:59:15 -04:00
Daniel Agar