44277 Commits

Author SHA1 Message Date
Daniel Agar
6c24413888 ekf2: filter flow vel (used for flow velocity reset)
- individual flow samples can be quite erratic
2024-08-27 10:38:17 -04:00
dagar
5ff4eea870 [AUTO COMMIT] update change indication 2024-08-27 16:16:55 +02:00
Daniel Agar
ac48b8b51d ekf2: mag declination fusion always if there is no aiding 2024-08-27 16:16:55 +02:00
Daniel Agar
2a9e205442 ekf2: fuseDeclination respect mag update_all_states
- when both mag_hdg/mag_3d are inactive we should be able to continue
   updating mag without any possible impact on other states
2024-08-27 16:16:55 +02:00
Daniel Agar
9d57a3c02f ekf2: split resetMagCov() and skip mag reset if negligible change 2024-08-27 16:16:55 +02:00
Daniel Agar
bbcf741e9e ekf2: make mag control responsible for WMM
- this further untangles mag control (which requires the WMM) from GPS
2024-08-27 16:16:55 +02:00
sbtjagu
be4d0d351c
ackermann: add speed waypoint support and fix delay detection (#23572) 2024-08-27 13:35:48 +02:00
jmackay2
5fff1ad6d1 Fix spelling of airflow sensor msg comments 2024-08-27 09:23:43 +02:00
Jukka Laitinen
f67eb6989d mavlink: Fix ESC_STATUS sending for batches > 1
The indexing was wrong for esc_status sending for ESCs 4->

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2024-08-26 15:06:55 -04:00
LucaS
ca47f6f016
lib/mixer_module: added a constant instance start so that when instance start is changed in actuator yaml files they parameters are able to be used (#23616)
Co-authored-by: Luca Scheuer <luca.scheuer@iq-control.com>
2024-08-26 14:51:09 -04:00
Ramon Roche
16c77be7c0 tests: loosen radius of vtol rtl landing pos check 2024-08-26 14:05:17 -04:00
Daniel Agar
a75db1286d
logger: automatically limit buffer size to largest available free chunk (NuttX only) 2024-08-26 13:24:39 -04:00
Silvan Fuhrer
8bfd3b0f62
platforms/nuttx/init/stm32f7: rc.board_arch_defaults reduce LOGGER_BUF to 40
To get some breathing space on setups with memory-intensive components (e.g. UAVCAN).

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-08-26 13:13:11 -04:00
bresch
9183c479a5 ekf2: correctly compute vel variance from flow variance
Co-authored-by: Marco Hauswirth <marco.hauswirth@auterion.com>
2024-08-26 11:28:36 -04:00
Claudio Chies
1a4e8a7341
FLOW: PARAM: GCS Parameter readability 2024-08-26 16:09:21 +02:00
SuddenDeath
510d3cfb39
gz: Fix endless wait for gazebo on different worlds (#23613)
Co-authored-by: your-sudden-death <noreply@pm.me>
2024-08-24 17:15:41 +02:00
Daniel Agar
ebbb880e92
ekf2: always use corrected accel/gyro for filtered metrics 2024-08-23 17:35:59 -04:00
Daniel Agar
56560726d3 ekf2: sensor simulator fix GPS replay scaling 2024-08-23 14:35:05 -04:00
Daniel Agar
d7b165991f
cmake: relax git tag requirements
- default to v0.0.0 if tag isn't available
 - src/lib/px_update_git_header.py use same PX4_GIT_TAG as cmake
 - update lingering master branch references to main
2024-08-23 12:05:34 -04:00
Ramon Roche
54f7b58007 Commander: lock down mav sys and comp id
- keeps them as local params at init
- only allow to set at init
2024-08-23 11:19:25 -04:00
bresch
1a0f97ebbd ekf2-fake pos: add valid fake position fusion
This is similar to fake pos but is only used when the ekf has an
external information telling it that the vehicle is not changing
position. This information can then be used to keep a valid local
position even when the vehicle isn't exactly at rest.
2024-08-23 11:17:21 +02:00
bresch
64b0586dad ekf2: return validity based on dead-reckoning time only 2024-08-23 11:17:21 +02:00
David Sidrane
cf941b18df Nuttx with stm32h7: STM32H7X5XX selects hardware files backport 2024-08-23 05:12:28 -04:00
jfbblue0922
13c413622b Nuttx with stm32h7: STM32H7X5XX selects hardware files backport 2024-08-23 04:48:20 -04:00
Jaeyoung Lim
b1dfe1d731 Update gz version to harmonic 2024-08-22 21:37:00 -04:00
Ramon Roche
00c3017334 ci: add note regarding RunsOn 2024-08-22 12:06:50 -04:00
Ramon Roche
89f29e91de ci: slow down sitl test realtime 2024-08-22 12:06:50 -04:00
Ramon Roche
7f33dcfcfb ci: upgrade sitl mavsdk tests workflow 2024-08-22 12:06:50 -04:00
Jaeyoung Lim
d617bf4129
simulation/gz_bridge: Fix build issues with unused variable 2024-08-22 11:48:46 -04:00
Daniel Agar
7250ee1b32 ekf2: organize gyro_bias/accel_bias param yaml 2024-08-22 10:56:16 -04:00
Daniel Agar
ebbd2c1825 ekf2: organize aid source parameters 2024-08-22 10:56:16 -04:00
Claudio Chies
ee022a70c1
Navigator: Land: Improve it for VTOL by taking breaking distance into account (#23566)
* vtol adjust landing setpoint

* improve comment

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>

---------

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2024-08-22 14:10:36 +02:00
Silvan Fuhrer
e0bb56b6a7
Commander: Failsafe: set clear condition for action Land like for RTL (#23569)
For many failsafes, it is possible to select RTL and Land as actions.
In this commit I synchronize the clear condition for these two action
options, to always only clear on Disarm or manual mode change.
Reasoning is that for the user RTL and Land is a similar action and
I would thus expect them to be as similar as possible. And I in general
would rather not clear a failsafe state instead of too often clearing it.

Example: GF failsafe with action Land --> even if the drone is marginally
within the GF again, I want it to proceed with the Landing unless
I manually intervene.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-08-22 14:03:24 +02:00
Silvan Fuhrer
6ef82ada6e
Navigator: make sure VTOL transitions in Descend mode are alays triggered (#23578)
It previously didn't catch switches to Descend from a manual mode,
as both modes have navigation_mode_new=nullptr.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-08-22 14:02:32 +02:00
Konrad
20b6f343a3 mission_base: make sure all mission_items during landing phase have yaw set to NaN 2024-08-22 12:58:44 +02:00
ZeroOne-Aero
02ed1162ed
Update pab_manifest.c (#23594)
* Update pab_manifest.c

I have rebased on main and squash my commits into 1.

* Update pab_manifest.c

I have updated pab_manifest.c:
// BASE ID 0x150 ZeroOne Pixhawk Baseboard Alaised to ID 0
{HW_BASE_ID(0x150), base_configuration_0, arraySize(base_configuration_0)}, // ZeroOne Pixhawk Baseboard ver 0x150
2024-08-22 04:02:02 -04:00
jmackay2
b33b0398dd
Fix param typo in quadtailsitter airframe (#23588) 2024-08-22 10:30:10 +10:00
Jaeyoung Lim
ae16556107
simulation/gz_bridge: follow model in gz GUI (#22808) 2024-08-21 11:41:47 -04:00
Ramon Roche
b2f663648e
ci: github actions runs-on Dronecode AWS Infra
* ci: try runs-on Dronecode Infra
* ci: comment on how to disable RunsOn
* Update .github/workflows/build_all_targets.yml
2024-08-21 10:56:37 -04:00
KonradRudin
3478765c31
Navigator: MissionFeasibilityCheck: Rework 1st waypoint check (#23568)
* FeasibilityChecker: only warn when first waypoint is too far, but still accept mission as valid

* feasiblityChecker: make distance to first waypoint check against home position instead of current position, so it is more constant during a flight

* Apply suggestions from code review

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>

* feasibilityCheckerTest: update tests to not fail for first waypoint check

* feasibilityChecker: make comment for 1stwaypointcheck event

* Feasibility check unit test: fix comment

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

---------

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2024-08-21 09:08:36 +02:00
Jaeyoung Lim
f252e20eae
Revert "Update GZBridge to be able to use gazebo airspeed. Add quadtailsitter. (#23455)" (#23583)
This reverts commit 7e45f4915208b2d02e05e5741ff7456cf92120f9.

Co-authored-by: jmackay2 <1.732mackay@gmail.com>
2024-08-20 19:36:08 -04:00
bresch
0931179579 ekf2: extract WMM update logic 2024-08-20 10:32:27 -04:00
Beniamino Pozzan
98eae3cd4c fix: make help on Ubuntu 22.04
Ubuntu 22.04 uses make 4.3 which broke the current `make help` target
Reference:
https://stackoverflow.com/a/26339924

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@gmail.com>
2024-08-19 11:19:31 -04:00
Thomas Stauber
f2f4488594
drivers/gps: publish secondary instance satellite_info if main instance is advertised 2024-08-19 11:14:12 -04:00
Niklas Hauser
ecfdbd2e60 littlefs: needs more stack when used 2024-08-19 11:05:50 -04:00
David Sidrane
c60b1d1a5f board_hw_rev_ver: Support EEPROM-only HW IDs 2024-08-19 11:05:50 -04:00
Niklas Hauser
07734c243f mtd: Initialized the RAMTRON speed with 30MHz 2024-08-19 11:05:50 -04:00
David Sidrane
072892fbef romfs: rcS: support storage on other then SD card 2024-08-19 11:05:50 -04:00
Ramon Roche
746ae25768
ci: replace build workflows (#23550) 2024-08-19 10:41:25 -04:00
Alexis Guijarro
0481c04b2b Nuttx with backport (stm32h7x3x): Add External Power Supply option 2024-08-19 09:22:17 -04:00