5e790da634
ekf2: reset the timeout timer in the reset function directly
2021-12-10 15:18:10 +01:00
0d874cf00a
ekf2: move aiding start details in dedicated function
...
When an aiding source needs to be started, simply call the corresponding
starting function and any required reset is handled in there.
2021-12-10 15:18:10 +01:00
897775f38d
ManualControlSelector: Allow disabling stick input
2021-12-10 09:11:08 -05:00
300e439144
ManualControlSelector: Enable original PX4 default behavior until QGC catches up
2021-12-10 09:11:08 -05:00
d961a067b9
navigator: reduce NUM_MISSIONS_SUPPORTED 2000->500 for dataman RAM usability
2021-12-10 09:10:02 -05:00
ca3f6f59f9
dataman: add SYS_DM_BACKEND parameter
2021-12-10 09:10:02 -05:00
a9e918c7b2
fix ina226: use shunt param value
2021-12-10 09:03:08 -05:00
a4ca298ee9
simulator_mavlink: handle MAV_TYPE_VTOL_RESERVED3
2021-12-10 09:03:08 -05:00
7aed8c4f47
sd_bench: print errno on write failure
2021-12-10 09:03:08 -05:00
80300c36b4
parameter units: add 'A' (Ampere)
2021-12-10 09:03:08 -05:00
d1aec01b86
uavcan/actuators: stop update esc status if there is no UAVCAN ESCs
2021-12-10 09:03:08 -05:00
0d1d454a4c
mavlink: add missing 'sensor_calibration' lib dependency
2021-12-10 09:03:08 -05:00
31af09f8e7
Fix uavcan distance sensor not being logged
2021-12-10 07:19:34 +01:00
24d871f792
FW land detector: tighten thresholds in airspeed-less case
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2021-12-09 20:55:09 -05:00
ade4a1930c
trajectory-planning: Added option for PositionSmoothing library with single target waypoint that disables L1 guidance
2021-12-09 20:51:39 -05:00
08ee3208b2
mavlink: stop_command fix potential dead lock
2021-12-09 20:40:55 -05:00
95222baa33
fix incorrect L1 period param documentation ( #18811 )
...
* fix incorrect L1 period param documentation
* reduce minimum L1 period
2021-12-08 16:42:50 +01:00
8b1543e3b0
mavlink: destroy all instances fix potential dead lock
2021-12-08 09:30:39 -05:00
b00ebe53bb
FlightTaskAuto: use MPC_VEL_MAX instead of MPC_XY_CRUISE for emergency braking thresholds
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2021-12-08 09:13:01 +01:00
51c0e5553e
vmount: adjust MNT_RANGE_PITCH and MNT_RANGE_ROLL defaults
...
- this seems like a much more reasonable default
2021-12-08 01:02:46 -05:00
3b94742117
vmount: adjust timeout 50 -> 20 ms (50 Hz)
2021-12-08 01:02:46 -05:00
9cb2bf389c
vmount: add param to use RC input for angular rate
...
Until now RC input was translated to angles only. I added the param
MNT_RC_IN_MODE which allows the RC input to be used for angular rate.
2021-12-08 01:02:46 -05:00
08b0ac9654
dataman: retry file read/write failures and report seek errors
2021-12-07 17:03:07 -05:00
495f1c9165
battery: don't initialize _source without constructor
2021-12-07 21:06:51 +01:00
68e2940f58
math: support max of three values additional to min and use it everywhere
2021-12-07 21:06:51 +01:00
e8676fe87a
BATTERY_STATUS: improve filling cell voltage
...
according to review comment
2021-12-07 21:06:51 +01:00
b41e345a5b
battery: correct updateBatteryStatus() description
2021-12-07 21:06:51 +01:00
ee3bc6673a
AnalogBattery: make update variables const
2021-12-07 21:06:51 +01:00
fdc40880d0
battery: separate out publishing from updating
...
to allow smart battery drivers to use the battery class and
filling in additional information in case it makes sense.
2021-12-07 21:06:51 +01:00
e70d70468a
battery: pass voltage and current by setter
2021-12-07 21:06:51 +01:00
39641494da
battery: pass connected flag in by setter
2021-12-07 21:06:51 +01:00
38d23f5345
battery: pass priority in by setter
2021-12-07 21:06:51 +01:00
f9fc9a9af6
battery: pass source in by constructor
2021-12-07 21:06:51 +01:00
b965923c08
battery: fetch throttle value inside of class
2021-12-07 21:06:51 +01:00
ddc6b6bc9c
battery: move MAVLink specific handling out of battery class
2021-12-07 21:06:51 +01:00
da2fdf923e
battery parameters: allow usage of 1S battery
2021-12-07 21:06:51 +01:00
7185bb3243
vmount: output rc simple protections
2021-12-07 13:11:22 +01:00
c947562183
ekf: get rid of intermediate variable "fuse_height"
2021-12-07 09:16:21 +01:00
9651f78b0a
ekf: centralize the height fusion decision
2021-12-07 09:16:21 +01:00
d583ef6b79
ekf2: move height fusion code to separate source file
2021-12-07 09:16:21 +01:00
01e60e853e
navigator: increase stack slightly
2021-12-06 15:10:50 -05:00
41378fcef9
ms5611: lower SPI clock 20 MHz -> 16 MHz
...
- this was necessary to get the secondary ms5611 working reliably on a
particular CubeOrange
- the sensor is transferring very little data, so lowering the speed by
default everywhere is harmless
2021-12-06 12:51:52 -05:00
8cd517f533
dataman: PX4_ERR on create_work_item failure
2021-12-06 10:23:42 -05:00
9ab633c18f
drivers/imu/invensense: check register bank during probe if necessary
...
- the WHO_AM_I is only accessible in register bank 0, which might not
be currently selected if the sensor didn't have a clean reset
2021-12-06 10:22:54 -05:00
4bf1b46e47
boards: free up flash on crazyflie and omnibus
2021-12-06 09:37:08 -05:00
1f6acd0171
parameters: add simple backup and restore mechanism
2021-12-06 09:37:08 -05:00
674b92df18
parameters: sleep 10 ms before retrying a failed import/export
2021-12-06 09:37:08 -05:00
7bfebf5289
parameters: add param dump to read and decode bson to console
2021-12-06 09:37:08 -05:00
7560d45c61
parameters: import tolerate unhanlded BSON types
2021-12-06 09:37:08 -05:00
1af068179e
parameters: tinybson print errors and count imported types
2021-12-06 09:37:08 -05:00
bresch