fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-31 06:21:35 +08:00
Code Issues Packages Projects Releases Wiki Activity
40,531 Commits 852 Branches 161 Tags
554283655ccb4e0e12f4ece3502f22b044499d3b
Commit Graph
386 Commits
Author SHA1 Message Date
Igor Misic 554283655c Revert "px4io: replace safety_off state with safety button event (#19558)" 
This reverts commit 12a81979a8.
 2022-05-26 10:06:32 -04:00
Igor Misic 6aefcbb6cf Revert "px4iofirmware: fix for bug introduced with #19558" 
This reverts commit 79a34b5aed.
 2022-05-26 10:06:32 -04:00
Daniel Agar 376201e64d boards: px4_fmu-v5/v5x init all I2C pins 2022-05-24 11:02:03 -04:00
Igor Misic 79a34b5aed px4iofirmware: fix for bug introduced with #19558 2022-05-23 14:59:11 -04:00
Igor Misic 12a81979a8 px4io: replace safety_off state with safety button event (#19558) 
internal PX4IO safety_off state is removed and replaced with a normal safety button event. From this 'commit' commander is taking care of the PX4IO safety.
 2022-05-23 06:54:37 +02:00
Daniel Agar a80a74af79 Jenkins: compile update uavcanv1 -> cyphal 2022-05-10 11:23:22 -04:00
Daniel Agar 858292209d boards: px4_fmu-v5_uavcanv0periph disable common differential pressure sensors to save flash 2022-05-10 11:17:24 -04:00
Peter van der Perk b1ad4e8864 Upgrade libcanard to 3.0 and rename uavcan_v1 to cyphal 
Did some prep work for redundant interfaces by introducing CanardHandle class to decouple physical interfaces from cyphal.cpp
 2022-05-10 09:46:18 -04:00
Beat Küng 3ac8fdbe29 px4/fmu-v5/stackcheck: disable module to reduce flash 2022-05-10 10:25:06 +02:00
Beat Küng 6a35c9f5fe px4/fmu-v5/protected.px4board: disable module to reduce flash 2022-05-10 08:57:39 +02:00
Peter van der Perk 7e6aa28106 Added LTO targets for CI 2022-05-02 10:07:54 -04:00
Daniel Agar fc7e979d84 boards: px4_fmu-v5_uavcanv0periph disable modules to save flash 2022-04-26 08:39:19 -04:00
Daniel Agar 2e290345d3 boards: px4_fmu-v5_stackcheck disable unused systemcmds to save flash 2022-04-18 10:01:29 -04:00
Daniel Agar 90e2cab3fa boards: px4_fmu-v5/v5x run default & rtps boards through kconfiglib to cleanup 2022-04-18 09:58:36 -04:00
Daniel Agar 3cdeeb8d64 px4iofirmware: convert most files to c++ 2022-04-17 20:44:30 -04:00
Daniel Agar d06032d7f3 boards: px4_fmu-v5_uacanv0periph disable systecmds/sd_bench to save flash 2022-04-17 16:04:01 -04:00
Daniel Agar 3f13c70cae px4io cleanup LED and heater handling 
- most px4_io-v2 boards have a blue LED that breathes for status
 - the pixhawk 2.1 (hex) re-used this blue LED for as an IMU heater (active low), but kept the same board id (so we have to detect at runtime)
 - the new cubepilot boards (yellow, orange) inverted the polarity of this heater pin
 - untangle the mess slightly so that things we know statically (eg cubepilot cubeorange LEDs and heater polarity) are handled at build time.
 2022-04-13 18:43:59 -04:00
Daniel Agar 091fca701e px4io: input_rc only publish new successful decodes 
- previously an invalid decode would continue to be transferred to the FMU (at 50 Hz) and published to the rest of the system as successfully decoded new RC data
 - by only publishing new successful decodes we can more effectively discard invalid data in downstream consumers
 2022-04-09 14:28:16 -04:00
Daniel Agar f0be554857 boards: px4_fmu-v5_uavcanv0periph disable modules to save flash 2022-03-31 09:59:58 -04:00
Daniel Agar 82c1ffb8f8 boards: px4_fmu-v5_stackcheck disable common telemetry modules to save flash 2022-03-30 10:07:05 -04:00
CUAVmengxiao 1870b9245b fmu-v5: add macro definitions for different version revisions 2022-03-29 17:09:34 -04:00
CUAVmengxiao c0d5ae2f9f fmu-v5: Add support for ICM-42688-P 2022-03-29 17:09:34 -04:00
Daniel Mesham 06a9be74fa microdds: add xrce client 2022-03-22 09:01:05 +01:00
Jukka Laitinen 4658a627d7 Separate i2c and spi board bus configuration into and own library for protected build target 
This info is needed on both kernel and user sides, and is just data.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-03-17 08:01:51 +01:00
Jukka Laitinen 56c6120e83 Use IOCTL for board_read_VBUS_state in NuttX protected builds 
Direct gpio read is not possible from user side applications, so use boardctl
interface instead.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-03-17 08:01:51 +01:00
Jukka Laitinen 0cf3079401 px4_fmuv5: Implement BOARD_*_LOCKOUT_STATE in protected/kernel builds 
In memory protected builds these perform nuttx boardctl ioctl calls to kerenel

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-03-17 08:01:51 +01:00
Jukka Laitinen 356328056a Add px4_fmu-v5_protected target 
Add a target for nuttx protected build development

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-03-17 08:01:51 +01:00
Daniel Agar 4746a19c0c boards: px4_fmu-v5_stackcheck disable UUV modules to save flash 2022-03-15 12:10:03 -04:00
Beat Küng e10ff59340 px4/fmu-v5/stackcheck: disable module to reduce flash 2022-02-25 08:30:58 +01:00
Daniel Agar 5b5d428189 boards: px4_fmu-v5_stackcheck disable fake_gps to save flash 2022-02-23 10:44:09 -05:00
David Sidrane c0facec889 cdc_acm_check:Prevent USB disconect on param save 
If the hardware support RESET lockout that has nArmed ANDed with VBUS
   vbus_sense may drop during a param save which uses
   BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE to prevent external resets
   while writing the params.  If we are not armed and nARMRED is low
   we are in such a lock out so ignore changes on VBUS_SENSE during this
   time.
 2022-02-21 10:56:41 +01:00
David Sidrane 2e67b92b4d px4_fmu-v5_stackcheck:Fit in flash 2022-02-16 10:09:02 -05:00
Julian Oes 490a0c473b Rename vmount to gimbal 2022-02-07 19:21:15 -05:00
Jukka Laitinen f8a090e85e Remove HYGROMETERS from fmu-v5 stackcheck build and rename to COMMON_HYGROMETERS 
The stackcheck build flash space overflows after adding hygrometers.

Also follow the naming convention of other similar config flags, and rename the
config.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-02-01 08:56:25 -05:00
Roman Dvořák ed475ca324 SHT3x driver 
SHT3x driver, clean code
changes leading to merge TFHT with CUAV hygrometer
Delete humidity_temperature.msg
Update CMakeLists.txt
rename 'atmosphefir_quantities' to 'hygrometers'
fix logging
removed cmake files
fix PR issues
 2022-01-31 21:38:26 -05:00
Jukka Laitinen 1f9ace3901 boards/px4/fmu-v5: Add linker scripts for kernel-userspace split 
These scripts are used in protected build configuration

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-31 20:26:08 -05:00
Beat Küng 92769bd2b2 dshot: remove BOARD_DSHOT_MOTOR_ASSIGNMENT & handle timer channel gaps 2022-01-21 20:41:15 -05:00
Daniel Agar d077ca15fb delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test 2022-01-10 09:51:11 -05:00
Daniel Agar df44df2df6 delete systemcmds/esc_calib 
- this is redundant with commander esc_calibration
 2022-01-10 09:51:11 -05:00
Daniel Agar daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00
Daniel Agar e835a7c4ea boards: enable readline history and tab completion on newer boards 2022-01-03 10:44:32 -05:00
Daniel Agar f76aa0e772 cmake: NuttX ARMV7M_STACKCHECK skip ekf2 
- px4_fmu-v5_stackcheck switch from icm20689 -> bmi055 (lower rate)
 - this is to make performance tolerable
 2022-01-01 18:43:27 -05:00
Daniel Agar 77b65ee564 boards: px4_fmu-v5_debug disable stack check 
- this is redundant with px4_fmu-v5_stackcheck
 2021-12-31 19:34:18 -05:00
Julian Oes 9686c81f7d boards: enable flow control on CDCACM 
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.

The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.

The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4.  For more information about the issue, see:
apache/incubator-nuttx#3633

As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
 2021-12-21 08:01:38 +01:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
Cindy Hsieh ca90c785e9 correct pin in the comment, no code changed 2021-12-09 20:40:34 -05:00
Daniel Agar 3160e7a3cd Jenkins: run calib_udelay on test rack 2021-12-05 19:42:10 -05:00
Daniel Agar a2064cceff boards: enable early MPU reset on any board potentially not using the PX4 bootloader 2021-12-01 20:13:41 -05:00
Peter van der Perk 36ba8cc6dd UAVCANv1 update FMU-V5 config 2021-12-01 09:29:15 -05:00
David Sidrane df1c94dd4e px4_fmu-v5_debug:Increase stack size 2021-11-29 16:01:08 -05:00