This new check is inteded to trigger if there is no data variation published by
the airspeed driver for the first 10s after the first data is published.
This is to capture malfunctioning sensors/drivers that do publish a value, this
value though does not come from real sensor measurements.
Previously this was captured by the data stuck check, but it has shown that
some drivers can publish a stuck value without being actually malfunctioning
(e.g. when the airspeed is outside of their measurement range). Checking for
any data variation is the more conservative check that still catches the above
described failure case.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
When a mission starts capturing images using the
MAV_CMD_IMAGE_START_CAPTURE command, it should also stop it again, in
case it is stopped early, e.g. with RTL.
Issue addressed: ROS2 is built from source and
no system-wide version of fastrtps is installed
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
Such that the loiter (orbit) status can be displayed on groundstation
and the WP is accepted once within loiter radius
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
- To check stack smashing (buffer overflow)
- To check if the buffer without enough length gets appropriate values
filled
- To check if the format has expected length
- Previously, not having a proper boundary check caused overflows in the
buffer (wrong memory access)
- Moreoever, negative size values getting introduced to snprintf &
strncat were also being truncated to unsigned value, hence causing
overflow, so index check needed to be added before both functions
- Fixed typo in board_common.h
If the current yaw setpoint is valid we should use it to make the transition in this direction.
For a VTOL_TAKEOFF the yaw_setpoint is used to specify the transition direction (the
vehicle is aligned towards it and then transition is started). The current yaw can be
a bit off (e.g. because MIS_YAW_ERR is large), and it is better to track the actual setpoint.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Silvan Fuhrer