Daniel Agar
6a60fba96d
boards: holybro_kakutef7_default remove systemcmds/ver to save flash
2021-11-11 11:17:15 -05:00
Matthias Grob
00905973c7
boards/kakutef7: remove dmesg to save flash
2021-11-09 16:05:25 +01:00
Daniel Agar
2d816e0b3e
[WIP] manual_control selector hacks
2021-11-09 16:05:25 +01:00
Daniel Agar
4627f5514e
boards: holybro_kakutef7_default disable load_mon to save flash
2021-11-07 20:36:47 -05:00
Daniel Agar and Paul Riseborough
68026eadeb
save significant IMU bias changes learned by the EKF
...
* ekf2: make publishing of learned accel biases more robust
* ekf2: reset accel bias if calibration updated
* msg: add separate accel and gyro calibration counters
* ekf2: use separate accel and gyro calibration counters
* ekf2: rework logic to reset biases when calibration counters increment
* sensors: add saving of learned accel biases
* ekf2: generalized saving accel/gyro/mag in flight sensor calibration
* boards: holybro kakutef7 disable systemcmds/perf and systemcmds/top to save flash
Co-authored-by: Paul Riseborough <gncsolns@gmail.com >
2021-11-07 15:34:27 -05:00
Beat Küng
8476875b4d
Kconfig: add missing serial ports
2021-10-27 08:03:55 +02:00
Peter van der Perk
05d71c8118
Kconfig fix CI issues after rebase
2021-10-07 10:09:01 -04:00
Peter van der Perk
ed5fee1a72
Backport #18311 mc atune
2021-10-07 10:09:01 -04:00
Peter van der Perk
454c907b7d
Kconfig backport #18327 mag_bias
2021-10-07 10:09:01 -04:00
Peter van der Perk
36191e649a
Kconfig backport #18289 and other flash size fixes
2021-10-07 10:09:01 -04:00
Peter van der Perk
33fd65e5fe
[Kconfig] Fix regressions found by bloaty and cleanup unused cmake
2021-10-07 10:09:01 -04:00
Peter van der Perk
21e6547ac7
[Kconfig] Toolchain & platform fixes, SITL still broken
2021-10-07 10:09:01 -04:00
Peter van der Perk
6af0477733
[Kconfig] Gnerate px4board from old cmake
...
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
2021-10-07 10:09:01 -04:00
Daniel Agar
bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every
...
- remove ts_to_abstime dependency
2021-10-06 14:39:59 -04:00
Daniel Agar
2b9ebb7ed6
boards: holybro_kakutef7 disable systemcmds/work_queue to save flash
2021-10-05 17:10:30 -04:00
Daniel Agar
6d78054f50
mavlink USB auto start/stop on boards with VBUS
...
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
bresch
1443f773da
mbe: add module to targets
2021-10-02 21:25:21 -04:00
bresch
5874b1f87c
mc atune: add module to all targets
...
- adjust flash constrianed targets to fit
2021-10-02 18:12:05 -04:00
Beat Küng
c5c80e31b6
boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h
2021-09-08 16:10:24 -04:00
Beat Küng
a8e75d174c
boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS
2021-09-08 16:10:24 -04:00
Daniel Agar
40e5477edb
NuttX boards fix mkfatfs and rcS logic
2021-09-01 15:16:00 -04:00
David Sidrane
bb913ae11a
system_load:Track Dynamic PID hash
2021-08-13 14:22:00 -04:00
David Sidrane
a73b688566
holybro_kakutef7: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
Beat Küng
0e1f3a2d62
px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name
2021-08-03 10:36:25 +02:00
David Sidrane
05bdef867d
Track NuttX syslog change
2021-06-16 17:07:47 +02:00
Daniel Agar
5f775b508f
boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7
2021-06-01 15:19:15 -04:00
David Sidrane
32e92ba817
Revert:Pull downs - bad levels cause motor spins
2021-06-01 15:18:47 -04:00
David Sidrane
b3b74eaaf6
holybro_kakutef7: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
Beat Küng
2219e096d7
cmake: embed param metadata if not CONSTRAINED_FLASH and not "test" LABEL
2021-04-15 08:16:51 +02:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
00016e53fa
boards: holybro/kakutef7 disable CONSTRAINED_FLASH to increase optimization
2021-03-16 10:30:32 +01:00
Daniel Agar
2257c3767e
simple gyro auto calibration module
2021-03-15 09:46:47 +01:00
Daniel Agar
f8eaa6e46b
ROMFS handle bl_update generically
...
- include all available legacy bootloaders
2021-03-11 00:38:18 +01:00
Daniel Agar
4d288512b5
add board architecture specific init defaults
2021-03-09 19:59:41 +01:00
Daniel Agar
19de1e57e3
gyro_fft promote to modules and include on all boards
2021-03-05 10:56:54 -05:00
Daniel Agar
ab0d0fd0be
uORB move to PX4 platform layer
2021-02-17 11:25:56 -05:00
Daniel Agar
a257120e8d
boards: use new param default mechanism
2021-02-12 08:27:47 -05:00
Daniel Agar
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
Daniel Agar
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
Matthias Grob
7545249215
Add flight_mode_manager to all targets with mc_pos_control
2020-12-30 10:25:08 -05:00
David Sidrane
2b69fad3ac
holybro_kakutef7: Use px4_platform_configure
2020-12-02 20:40:23 -05:00
Daniel Agar
c60743b306
boards: NuttX increase file name max 32 -> 40
2020-11-08 12:51:59 -05:00
Daniel Agar
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
Beat Küng
91fa2002e3
kakutef7: fix output ordering
...
Regression from d2254c2e44
2020-10-03 10:45:30 -04:00
David Sidrane
f77bf7f475
holybro_kakutef7: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
David Sidrane
abe9f1a768
holybro_kakutef7 Updates for NuttX 9.1.0-
...
holybro_kakutef7: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
2020-09-07 23:09:20 -04:00
Daniel Agar
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
Daniel Agar
e3d31a881e
boards: NuttX disable posix message queues
2020-07-17 17:00:21 -04:00
Daniel Agar