fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
2,953 Commits 852 Branches 161 Tags
Commit Graph

298 Commits

Author SHA1 Message Date
Andrew Tridgell
e896944adc ms5611: try to measure the performance cost of I2C timeouts 2013-02-19 14:45:45 +11:00
Andrew Tridgell
317515fb6a px4io: added INAIR_RESTART enable/disable flags 
the autopilot code needs to know that in-air restart may happen, so it
should be something that is enabled, rather than on by default.
 2013-02-18 14:16:09 +11:00
Andrew Tridgell
b53d34a3f0 px4fmu: add support for write() interface for PWM output 
this matches the PX4IO interface
 2013-02-18 08:32:49 +11:00
Andrew Tridgell
d6c108d870 px4fmu: added publication of input_rc ORB values 
this allows for PPM input with no IO board
 2013-02-18 08:32:25 +11:00
Lorenz Meier
219279ac82 Merge branch 'px4io-i2c' into px4io-i2c-nuttx 2013-02-17 18:13:09 +01:00
Lorenz Meier
56bf9855a8 Finished and tested in-air restore of arming state, as long as both boards reset at the same time armings state is now retained 2013-02-17 17:47:26 +01:00
Lorenz Meier
d677512981 Merge branch 'px4io-i2c' of github.com:PX4/Firmware into px4io-i2c-nuttx 2013-02-17 16:33:59 +01:00
Lorenz Meier
038037d676 Allow to in-air restore the FMU and IO arming state if only one of the two fails 2013-02-17 16:06:33 +01:00
Lorenz Meier
8f8e30052b Merged 2013-02-17 15:29:31 +01:00
Andrew Tridgell
04bea8678e Merged debuglevel command from Tridge 2013-02-17 13:03:36 +01:00
Lorenz Meier
400b073aa3 Merge branch 'master' of github.com:PX4/Firmware into px4io-i2c 2013-02-16 16:46:57 +01:00
Lorenz Meier
781845587c Merge pull request #195 from PX4/gps 
GPS driver rewrite
 2013-02-15 13:46:03 -08:00
Lorenz Meier
dd858f7056 Merge pull request #197 from PX4/mpu6000_fixes 
MPU6000 driver improvements
 2013-02-13 06:31:42 -08:00
Lorenz Meier
4595cc65b8 Reworked manual override flag, reworked arming slightly. Pending testing 2013-02-13 08:38:31 +01:00
Lorenz Meier
b750a588a0 Merge branch 'master' of github.com:PX4/Firmware into px4io-i2c 2013-02-12 09:34:41 +01:00
Lorenz Meier
163257f3bd Fixed scaling of RC calibration in IO driver, fixed interpretation of (odd, but APM-compatible) channel reverse flag 2013-02-12 09:33:52 +01:00
Lorenz Meier
ef301890ba Merge branch 'px4io-i2c' of github.com:PX4/Firmware into px4io-i2c 2013-02-12 09:13:51 +01:00
px4dev
aa16a63a10 Fix assignment of relay GPIOs. 2013-02-11 20:40:06 -08:00
Julian Oes
df6cf142e7 Another rewrite: most of the polling, reading and writing is now inside the GPS classes 2013-02-08 11:05:57 -08:00
Andrew Tridgell
1fed72caf8 mpu6000: support setting the DLPF filter frequency 
APM uses this for different aircraft types
 2013-02-08 16:21:00 +01:00
Andrew Tridgell
508d6d2b4f drivers/mpu6000: add default product ID case 2013-02-08 16:20:29 +01:00
Julian Oes
a88b9f4eef Restructered the parsing/configuring, MTK working 2013-02-07 14:48:00 -08:00
px4dev
8cb583cf80 Assorted compile fixes. 2013-02-06 23:50:55 -08:00
Julian Oes
d36eb8a3fc Sped up MTK configuration but the detection time can still be improved: timeouts/usleeps 2013-02-06 23:25:09 -08:00
Julian Oes
b620136af4 Added support for MTK revision 19, working condition but configuration of MTK is very slow and needs improvement 2013-02-06 22:58:52 -08:00
Lorenz Meier
4b2e8556b8 Merge branch 'px4io-i2c' of github.com:PX4/Firmware into px4io-i2c 2013-02-07 07:06:42 +01:00
Julian Oes
0d54661ce9 Added MTK 1.6, works after some seconds, work in progress 2013-02-06 20:04:49 -08:00
Julian Oes
6ed5d97aea Merged mtk16 and mtk19 helper classes, configure() now writes directly instead of buffering 2013-02-06 18:47:32 -08:00
Julian Oes
d962e6c403 Removed some unnecessairy flags, home position back working 2013-02-06 13:50:32 -08:00
Julian Oes
fc4be3e728 Changed gps position topic mostly to SI units and float, removed counters and added specifig timestamps 2013-02-06 12:41:05 -08:00
Julian Oes
a79ad17f09 Changed parse interface, differentiation between config needed and position updated, working but might be solved more elegant 2013-02-05 23:16:32 -08:00
Lorenz Meier
fbbeef7e29 Update on every position change, do not wait for other measurements 2013-02-05 18:54:06 +01:00
Andrew Tridgell
804f0e4219 px4io: make uploader more reliable 
avoid seeks, lower verify recv size and removed cruft
 2013-02-05 18:30:31 +01:00
Lorenz Meier
167ec25c4f Fixed altitude jump issue, hunted down and fix by Andrew Tridgell. 2013-02-05 18:28:41 +01:00
Lorenz Meier
a196e73842 Fixed arm ok flag typo 2013-02-05 18:11:59 +01:00
Lorenz Meier
368ba0056f Added option to select port name, minor tweaks to status printing, sacrificied 20 bytes for better status / user debuggability 2013-02-05 13:47:31 +01:00
Julian Oes
53c11f87cb Small corrections 2013-02-04 17:57:30 -08:00
Julian Oes
039d394c20 Merged with newer, cleaned up code, fixed the checksum error 2013-02-04 16:27:01 -08:00
Lorenz Meier
cb0fd834ae Minor polishing, fixed rate and last measurement indication 2013-02-04 18:14:55 +01:00
Lorenz Meier
d4bd7225ba More cleanup 2013-02-04 18:00:10 +01:00
Lorenz Meier
13ec067570 Minor quick cleanups 2013-02-04 17:55:58 +01:00
Lorenz Meier
3fd8c73bfb Disabled old-style gps interface, enabled GPS driver 2013-02-04 15:58:53 +01:00
Lorenz Meier
50b736333f Reduced, but functional u-blox series driver 2013-02-04 15:57:12 +01:00
Lorenz Meier
0a7daf3cfd Merge branch 'master' of github.com:PX4/Firmware into px4io-i2c 2013-02-03 20:55:00 +01:00
px4dev
3e5cd26777 Merge pull request #194 from NosDE/master 
Options for Bus and BlinkM address added
 2013-02-02 09:23:25 -08:00
Marco Bauer
167cc4a197 Option for Bus and BlinkM address added 2013-02-02 17:36:43 +01:00
Marco Bauer
10361d997a Options for bus and blinkmaddress added. 2013-02-01 11:42:45 +01:00
px4dev
338f769202 Merge branch 'master' into px4io-i2c 2013-01-26 21:17:39 -08:00
px4dev
636e0cc56a It looks like retrying reads from the ms5611 is not safe either. 2013-01-26 20:23:19 -08:00
px4dev
6d0363faff Disarm IO at driver startup time. 2013-01-26 19:43:23 -08:00