Julian Oes
40fe9ab969
meas_airspeed: don't take the aboslute value
2014-08-23 18:03:01 +02:00
Lorenz Meier
bcca3cae74
Run full update straight after reset, filter wind speed dynamically
2014-08-23 16:03:24 +02:00
Pavel Kirienko
6a8971e28f
New UAVCAN initialization logic
2014-08-23 17:31:46 +04:00
Lorenz Meier
1143cdbadf
Merge branch 'master' of github.com:PX4/Firmware into ekf_varweight
2014-08-23 13:19:37 +02:00
Thomas Gubler
cfbbe60291
fw pos control: launchdetection logic cleanup
2014-08-23 12:41:48 +02:00
Thomas Gubler
9f5004be2d
fw pos control: set default roll, pitch while waiting for launch
2014-08-23 12:13:30 +02:00
Thomas Gubler
40d47fb069
fw pos control: use new lauchdetector states
2014-08-23 11:45:20 +02:00
Thomas Gubler
5a5617cb59
launchdetector: return state of detection
...
The launchdetector now has a intermediate state (controlsenabled) which
is meant to be interpreted by the controller as: "perform attitude
control but do not yet power up the motor". This can be used in the
floating phase during a bungee launch for example.
2014-08-23 11:42:53 +02:00
Thomas Gubler
52ffc3bced
Merge remote-tracking branch 'julian/launchdelay' into launchdetectionstates
2014-08-23 09:10:36 +02:00
Thomas Gubler
8d3dd7363d
catapult launch detection: fix integration logic
2014-08-22 23:15:11 +02:00
Julian Oes
708ee8ae3a
autolaunch: added param for delay
2014-08-22 20:30:06 +02:00
Pavel Kirienko
7132141cc4
UAVCAN: Printing all known sensor bridge names with usage info
2014-08-22 20:33:35 +04:00
Pavel Kirienko
6870cd4d3d
UAVCAN baro driver
2014-08-22 20:15:11 +04:00
Pavel Kirienko
2a6ab537b2
UAVCAN update
2014-08-22 20:04:31 +04:00
Pavel Kirienko
6ebd59c633
UAVCAN: improved sensor bridge factory
2014-08-22 15:52:35 +04:00
Pavel Kirienko
bdc2ecd9f6
Too much Ctrl+C Ctrl+V
2014-08-22 15:41:21 +04:00
Pavel Kirienko
e32ff6004b
UAVCAN mag driver fix
2014-08-22 15:31:08 +04:00
Pavel Kirienko
29dbe8aed5
UAVCAN magnetometer driver
2014-08-22 14:27:32 +04:00
Pavel Kirienko
54affaf633
UAVCAN sensor enable command fix
2014-08-22 13:58:05 +04:00
Pavel Kirienko
f820010a2b
UAVCAN GNSS subscription name fix
2014-08-22 13:24:31 +04:00
Lorenz Meier
edffb2eede
Merge pull request #1274 from PX4/irqprio
...
Disable CONFIG_ARCH_IRQPRIO in all NuttX configs
2014-08-22 09:14:37 +02:00
Pavel Kirienko
0d9f6b6e2e
UAVCAN: Refactored and generalized sensor bridge support
2014-08-22 01:52:23 +04:00
Pavel Kirienko
f87860bc96
UAVCAN update
2014-08-21 23:23:35 +04:00
Lorenz Meier
aa8fcceea2
Merge pull request #1297 from PX4/mission_fix
...
mavlink: missions manager compID cleanup
2014-08-21 14:40:34 +02:00
Lorenz Meier
9c75b9562e
Be more permissive with mission component IDs, renamed camera to onboard link but still accepting same commandline syntax
2014-08-21 14:39:17 +02:00
Lorenz Meier
29dba8dff3
Merge pull request #1300 from PX4/sensorswarnx
...
sensors: remove warnx
2014-08-21 12:50:29 +02:00
Thomas Gubler
f7dbc34027
sensors: remove warnx
2014-08-21 12:43:34 +02:00
Lorenz Meier
8f65d52aca
Merge pull request #1299 from PX4/navigatorstatefix
...
navigator: correct mode for land and termination
2014-08-21 09:46:14 +02:00
Thomas Gubler
3e1de713af
navigator: correct mode for land and termination
2014-08-21 09:39:43 +02:00
Lorenz Meier
4dcdaa7234
Merge pull request #1298 from PX4/adafruiti2cpwm
...
pca9685: correct input scaling
2014-08-21 09:38:14 +02:00
Thomas Gubler
5bc81c8561
pca9685: correct input scaling
2014-08-21 09:30:29 +02:00
Anton Babushkin
3cbfe989c7
mavlink: missions manager compID cleanup, use the common compID, stict compID checks for incoming messages
2014-08-20 21:54:38 +02:00
Lorenz Meier
24b1ff23f2
Merge pull request #1296 from PX4/adafruiti2cpwm
...
Adafruit i2c to pwm board driver
2014-08-20 20:26:12 +02:00
Thomas Gubler
c414417cf8
rename adafruiti2cpwm to pca9685
2014-08-20 16:24:57 +02:00
Thomas Gubler
dd85c0407c
adafruit i2c pwm: listen to uorb for setpoints
2014-08-20 15:45:57 +02:00
Thomas Gubler
66991f9bb1
bring up adafruit i2c pwm driver
...
includes the test function, fucntionality verified with scope and servo
2014-08-20 15:45:46 +02:00
Thomas Gubler
bb1a45ac42
skeleton for adafruiti2cpwm driver
2014-08-20 15:45:40 +02:00
Lorenz Meier
56ec052346
Merge pull request #1283 from PX4/qnh
...
add param for qnh
2014-08-20 15:43:17 +02:00
Lorenz Meier
7dc5951673
Merge pull request #1295 from muharred/master
...
HMC5883 set_excitement minor fix.
2014-08-20 12:28:12 +02:00
muharred
690843c53a
Reset excitement mode for hmc5883 sensor before applying a new one to avoid getting reserved 11 bits set in case of a set_excitement(1) call following a set_excitement(-1) call.
2014-08-20 13:06:39 +03:00
Holger Steinhaus
09a9ea87e7
uavcan: increased thread prio, reduces roundtrip latency by a factor of 5..7
2014-08-19 22:48:15 +02:00
Lorenz Meier
9e099b42fa
Merge pull request #1291 from PX4/mavlink_cmdint
...
mavlink: Handle command int packets
2014-08-19 15:41:43 +02:00
Lorenz Meier
6e8867928b
Merge pull request #1290 from PX4/sf_fix
...
Require a digit ahead of the dot for a valid number for the SF0x output
2014-08-19 15:40:52 +02:00
Lorenz Meier
cc98c6deff
Merge pull request #1277 from PX4/fwattvscale
...
fw att control: change control surface deflection scaling
2014-08-19 08:50:57 +02:00
Lorenz Meier
de7d9c5b95
Merge pull request #1293 from PX4/timeout_fix
...
Timeout fix
2014-08-18 23:18:41 +02:00
Lorenz Meier
2c0d192944
Use the wind speed estimate filtered values
2014-08-18 21:26:18 +02:00
Lorenz Meier
cfcb76f627
Add long-term stable wind estimate
2014-08-18 21:23:59 +02:00
sjwilks
5224796455
Merge pull request #1292 from PX4/as_fix
...
Airspeed fix attempt
2014-08-18 20:52:32 +02:00
Lorenz Meier
966e9d3f0a
Merge branch 'master' of github.com:PX4/Firmware into as_fix
2014-08-18 20:12:10 +02:00
Lorenz Meier
7eb521b6d4
Do not perform retries in airspeed driver - this is too much load for the HRT queue
2014-08-18 20:07:55 +02:00
Julian Oes