fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-05-19 10:19:05 +08:00
Code Issues Packages Projects Releases Wiki Activity
37,624 Commits 852 Branches 161 Tags
Commit Graph

499 Commits

Author SHA1 Message Date
Daniel Agar
df73a6667d NuttX cmake improvements 
- fix temporary Make.defs copy
 - implement custom macros for COMPILE, COMPILEXX, ASSEMBLE, ARCHIVE to enable ccache properly (if available and enabled)
 - fix NuttX mkdeps
 - fix libapps race condition with context
 2019-11-16 15:42:19 -05:00
David Sidrane
850821f47f [REVISIT] Support upstream DSHOT Revist! 
The Addition of PX4_ARCH_DCACHE_LINESIZE is fundamentally wrong.
   It asserst that an STM32F4 has a cache and it does not.
   This should be #if defined() on CONFIG_ARMV7M_DCACHE
 2019-11-16 11:43:42 +01:00
Daniel Agar
2af262ed1d NuttX cmake build wrapper thorough dependencies 2019-11-16 11:43:42 +01:00
Daniel Agar
99aae8b891 NuttX use toolchain math.h and avoid empty drivers/Kconfig 2019-11-16 11:43:42 +01:00
David Sidrane
b2f28c977d durandal-v1 Nuttx Based PX4 bootloader 
durandal bootloader:Run at 480 Mhz

durandal-v1:bootloader use VBUS detection

Add Durandal bootloader to build
 2019-11-16 11:43:42 +01:00
David Sidrane
65a26ec060 nxp_fmuk66-v1:Port to NuttX 8.1+ 2019-11-16 11:43:42 +01:00
David Sidrane
e847698c9f PX4 System changes Supporting STM32H7 
stm32:ToneAlarmInterfacePWM TIM15-TIM17 have a BDTR Register

common:board_crashdump Add H7 support

stm32/board_mcu_version:Support H7

PX4 ADC:Use 32 interface and resoution abstraction

Added PX4 stm32h7 ADC driver

stm32h7:adc fix ADC ready check

fmu: handle BOARD_HAS_PWM==5

cmake: improve error handling for NuttX olddefconfig failures

WorkQueueManager:Quiet loadmon stack warning

camera_trigger:GPIO support < 6 GPIO

Adjust stack sizes (under hw stack check)

PX4 System changes Supporting STM32H7 PX4IO Driver

aerotenna_ocpoc:ADC add px4_arch_adc_dn_fullcount

init.cmake:Track Upstream change needing Make.def at config time

PX4 System changes Supporting STM32H7

NuttX CMakeLists.txt Track upstream changes

Common board_crashdump add header and px4 config

NuttX simplify callinb make libapps

Use UINT32_MAX for error return

drivers:uavcannode NuttX chip is now hardware

drivers:uavcanesc NuttX chip is now hardware

px4io:Avoid Race on AP to PX4 IO upgrade
 2019-11-16 11:43:42 +01:00
David Sidrane
36a75b79a4 uavcan:Changes to support Nuttx 7.31+ 
libuavcan:Update with Kinetis NuttX 8.1+ support

Traking master uavcan changes
 2019-11-16 11:43:42 +01:00
David Sidrane
522ed2d99b NuttX based PX4 bootloader 
stm32h7 booloader:Obey VBUS input

stm32h7 booloader:Fully deinit systic
 2019-11-16 11:43:42 +01:00
Beat Küng
78944a70c3 Upgrade NuttX to 8.2 
Nuttx with PX4 contrib of bbsram fix

Nuttx 8.31+ with BBSRAM disable dcache

Nuttx 8.2-
 2019-11-16 11:43:42 +01:00
Daniel Agar
7bf9700426
NuttX: math.h drop extra math defines carried in PX4 defines.h 2019-11-03 10:30:00 -05:00
Matthias Grob
933ff8d480 Remove duplicate EOF trailing newlines 
because they can screw up git when merging branches.
 2019-11-02 09:49:46 -04:00
David Sidrane
a3e2777208 NuttX/nuttx with SDIO fixes (#13311) 
* NuttX/nuttx with SDIO fixes
 2019-10-31 16:55:16 +01:00
Beat Küng
1dd6b6a505 stm32f3: add libs and stubs for F3 build (thiemar_s2740vc-v1) 2019-10-30 11:48:47 +01:00
Beat Küng
3b7c1b4ff1 src/drivers/boards: move to platforms/nuttx/src/px4/common 2019-10-30 11:48:47 +01:00
Beat Küng
be7ed5e388 src/drivers/boards/common/{stm32,kinetis}: move under platforms/nuttx/src/px4 2019-10-30 11:48:47 +01:00
Beat Küng
58e161347b board_mcu_version: move to platforms/nuttx/src/px4 2019-10-30 11:48:47 +01:00
Beat Küng
e7519c9fa0 board_identity: move to platforms/nuttx/src 
And fix a potential alignment issue in board_get_mfguid and
board_get_px4_guid.
 2019-10-30 11:48:47 +01:00
Beat Küng
b30171ba8d board_common.h: move under platforms/common 
Also move board_determine_hw_info and board_gpio_init under platforms/nuttx
 2019-10-30 11:48:47 +01:00
Beat Küng
3198610f85 src/platforms: move all headers to platforms/common/include/px4_platform_common 
and remove the px4_ prefix, except for px4_config.h.

command to update includes:
for k in app.h atomic.h cli.h console_buffer.h defines.h getopt.h i2c.h init.h log.h micro_hal.h module.h module_params.h param.h param_macros.h posix.h sem.h sem.hpp shmem.h shutdown.h tasks.h time.h workqueue.h; do for i in $(grep -rl 'include <px4_'$k src platforms boards); do sed -i 's/#include <px4_'$k'/#include <px4_platform_common\/'$k/ $i; done; done
for in $(grep -rl 'include <px4_config.h' src platforms boards); do sed -i 's/#include <px4_config.h/#include <px4_platform_common\/px4_config.h'/ $i; done

Transitional headers for submodules are added (px4_{defines,log,time}.h)
 2019-10-30 11:48:47 +01:00
Daniel Agar
4192414576 clang-tidy: partially fix cppcoreguidelines-pro-type-reinterpret-cast 2019-10-28 10:50:31 -04:00
Igor Mišić
f4ee9141cb DShot: updated driver to use NuttX DMA functions (#13233) 2019-10-25 09:49:03 +02:00
Beat Küng
17551a99f8 io_timer: fix potential invalid memory access 2019-10-16 13:13:17 +02:00
Beat Küng
8a9744d05a dshot: allow boards to enable dshot only on a subset of the timers 2019-10-11 08:14:17 +02:00
Beat Küng
d0a7490222 dshot: update timer generation before DMA request 
This reloads the timer configuration before triggering DMA. Without that,
in rare cases, there were 17 bits sent instead of 16.
The 1. bit (1. pulse) was always wrong (too much), the rest of the bits
were the correct DShot packet that was meant to be sent.
 2019-10-11 08:14:17 +02:00
Beat Küng
7445c25fcc dshot: check if DMA still in progress 
No other functional change, just restructuring.
 2019-10-11 08:14:17 +02:00
Beat Küng
182efaa757 dshot: reduce static buffer size 
And handle failures of up_dshot_init().

On Omnibus: reduces memory usage if dshot is enabled by ~1.0KB.
The buffer is roughly 1KB in size.
 2019-10-11 08:14:17 +02:00
Beat Küng
69c10dcaac dshot: move implementation to a separate directory & library 
So that the static memory overhead is not added to targets w/o dshot
 2019-10-11 08:14:17 +02:00
Beat Küng
23dbd9426a dshot: handle dcache, flush cache before DMA transfer 2019-10-11 08:14:17 +02:00
Beat Küng
3234aca53b px4_micro_hal: add PX4_ARCH_DCACHE_LINESIZE definition 2019-10-11 08:14:17 +02:00
Igor Mišić
5bd9659301 stm32 timers: add dshot implementation 2019-10-11 08:14:17 +02:00
Daniel Agar
86dc4c5a00 cmake generate vscode launch.json 2019-09-21 13:06:49 -04:00
Daniel Agar
fb7521eb5e cmake px4_base -> px4_parse_function_args 2019-09-15 14:36:38 -04:00
Daniel Agar
d27dfcd921 NuttX CMakeLists.txt extract helpers (jlink, upload, etc) 2019-09-15 14:36:38 -04:00
Beat Küng
43fdcd7876 px4_middleware: remove that header and move px4::init to px4_init.h 
delete include:
for i in $(grep -rl 'px4_middleware.h' src platforms); do sed -i '/#include <px4_middleware.h/d' $i; done
 2019-08-30 07:59:44 +02:00
Beat Küng
f32abe8534 src/platforms: move remaining source files to platforms/common 2019-08-30 07:59:44 +02:00
Beat Küng
f8e0441e7b src/platforms/common: move to platforms/common 
Script to update include paths:
for i in $(grep -rl 'include <px4_work_queue' src platforms); do sed -i 's/#include <px4_work_queue/#include <px4_platform_common\/px4_work_queue/' $i; done
 2019-08-30 07:59:44 +02:00
Beat Küng
3bdfd8ce8d ToneAlarmInterface: move to drivers/drv_tone_alarm 
It belongs there since it's not a library providing the implementation, but
just declaring the interface.
 2019-08-30 07:59:44 +02:00
Beat Küng
f3fccf53f6 src/drivers/{kinetis,stm32}: move to arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng
3003e7d0fc drv_led_pwm: move to arch-specific directory 2019-08-30 07:59:44 +02:00
Beat Küng
bd1b267baa NuttX hrt: move into arch-specific directory 2019-08-30 07:59:44 +02:00
Beat Küng
1cb6c36a00 adc: refactor into arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng
ab43a83bed platform: restructure (NuttX) architecture-specific code 
updated: tone_alarm, px4io_serial, px4_micro_hal
 2019-08-30 07:59:44 +02:00
Daniel Agar
e8dcd8c2fc cmake nuttx ignore linking target warning 2019-08-28 22:50:23 -04:00
Hyon Lim
0262a699c1 UVify Core board support and airframes (Draco, Draco-R, IFO) (#12337) 
* also includes minor changes to make it easy to keep in sync with px4_fmu-v4
 2019-08-23 17:02:25 -04:00
Julian Oes
dd2d5c029f platforms: match usb-Hex_ProfiCNC device (#12772) 
This means that we are able to detect and flash the Pixhawk Cube Black.
 2019-08-22 01:32:39 -07:00
David Sidrane
21782603b3 px4_fmu-v5x: add networking 
* fixed dropped CONFIG_LIBC_FLOATINGPOINT=y
* fix RMII TX pinning
* update platforms/nuttx/NuttX/nuttx w/ f7 eth
 2019-08-08 20:38:56 -04:00
Daniel Agar
64f105b530 Update submodule nuttx to latest Mon Aug 5 20:30:34 UTC 2019 (#12636) 
- nuttx in PX4/Firmware (be76f909beadfe80415b733c020695efb042adef): b4013dcd4a
    - nuttx current upstream: 14f4dc735a
    - Changes: b4013dcd4a...14f4dc735a

    14f4dc7 2019-08-05 David Sidrane - [BACKPORT] kinetis:i2c transfer ensure correct result returned
 2019-08-05 13:32:46 -07:00
Daniel Agar
030508a71d cmake make bloaty available everywhere and improve output 2019-08-05 00:19:18 -04:00
Daniel Agar
f7c9acbdab Update submodule nuttx to latest Thu Aug 1 18:09:20 EDT 2019 (#12603) 
- nuttx in PX4/Firmware (210dbb5b8365eb003453695aa4711044bb6d49be): 257e1730dc
    - nuttx current upstream: b4013dcd4a
    - Changes: 257e1730dc...b4013dcd4a

    b4013dc 2019-08-01 David Sidrane - [BACKPORT] stm32l4:serial add HW HS on UART 4 & 5
4380c12 2019-08-01 David Sidrane - [BACKPORT] stm32h7:serial add HW HS on UART 4 & 5
0ff3e6c 2019-08-01 David Sidrane - [BACKPORT] stm32:serial add HW HS on UART 4 & 5
316126f 2019-07-31 David Sidrane - [BACKPORT] stm32f7:serial add HW HS on UART 4 & 5
 2019-08-01 16:14:45 -07:00