fa5dfb29cb
mro ctrl-zero-h7-oem:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
216959e221
holybro durandal-v1:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
7bc2393936
cubepilot cubeorange:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
a67edf229a
cuav x7pro:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
4f3d74b9d3
cuav nora:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
19fc33a66e
boards: ark/can-flow add debug build and reduce default
2021-03-19 15:44:57 +01:00
2360c50713
boards: spracing/h7extreme remove temperature_compensation and differential_pressure sensors to save flash
2021-03-18 19:34:51 -04:00
a86e854a3b
boards: CUAV CAN GPS enable safety button
...
- the circuit breaker was changed to set by default (disabling the safety button)
2021-03-18 19:33:19 -04:00
6d04a67b02
Moving define to microhal.h files, for each ST architecture. Correct channels were verified with ST_CUBE header files. For the H7 its a simplification for the current used H7x3. Other devices in that family expect the temperarture on channel 18.
...
F1: channel 16
F3: channel 16
F4: channel 18
F7: channel 18
H7: channel 17, on STMf32Hx3
2021-03-18 06:13:24 -07:00
3c77ef7eb3
Fixed adc config, to read internal reference to get cpu temperature
2021-03-18 06:13:24 -07:00
1429423876
gyro_fft: support sensor_gyro (non-fifo)
2021-03-18 10:04:04 +01:00
69e57b22ac
Add LEDs to ARK Can Bootloader
2021-03-17 18:10:22 -04:00
38ce892582
ARK Flow sensor rotations
2021-03-17 18:06:38 -04:00
33c5f4210a
X7 disable FFT
...
This depends on the IMU driver supporting queue
2021-03-17 22:03:18 +01:00
dd400e9562
Modal: Fix tabs in start script
2021-03-17 22:03:18 +01:00
8cc3247d21
PWM command: Switch default to status, leave info
2021-03-17 22:03:18 +01:00
c4e86f69c6
X7: Correct RGB led configuration
...
This removes unused modules and keeps the currently used ones in place.
2021-03-17 22:03:18 +01:00
9fe2f84db5
CUAV X7 Pro: Remove unneeded drivers.
2021-03-17 22:03:18 +01:00
891b231215
Ensure that AUX mixer is loaded when 2nd bank is present
2021-03-17 22:03:18 +01:00
205beb9526
boards: revert remaining CONFIG_ARMV7M_LAZYFPU
2021-03-17 09:58:23 -04:00
bffa83bd47
Reverting LAZYFPU for v1.12 beta1 Compatibility
...
Without reverting this a constant boot loop occurs.
Prior to merging, why this occurs on some F7 boards and not this one should be looked at.
With LazyFPU enabled, v1.12.0 beta1 will not boot but without it removed it works fine.
2021-03-17 06:10:02 +01:00
dd479f9cca
drivers/imu/analog_devices/adis16470: Analog Devices ADIS16470 IMU driver for CUAV x7pro
2021-03-16 18:00:06 -04:00
00016e53fa
boards: holybro/kakutef7 disable CONSTRAINED_FLASH to increase optimization
2021-03-16 10:30:32 +01:00
bcf93304c7
Board ID Update
...
Needed for updating firmware (due to boot loader).
2021-03-16 00:51:17 -04:00
8e6987d480
Board ID update
...
Needed for firmware to update.
2021-03-16 00:51:17 -04:00
be58db1ec9
boards: cubepilot_cubeorange_console add gyro_fft
2021-03-16 00:49:45 -04:00
8261ee5fd7
boards: px4_fmu-v5_stackcheck add gyro_fft
2021-03-16 00:49:45 -04:00
ae67c53b1e
boards: px4_fmu-v6u_default address flash shortage
...
- create separate px4_fmu-v6u_test variant for onboard testing code
2021-03-15 14:19:00 -04:00
4b99bd2077
boards: remove optional external ADIS IMUs to save flash
2021-03-15 13:37:24 -04:00
edd42cfa86
boards: px4/fmu-v5x disable optional external IMU drivers
2021-03-15 11:16:38 -04:00
0b4006ae86
boards: CUAV x7pro disable SPI6 IMU until NuttX BDMA is fixed
2021-03-15 10:54:43 -04:00
a5151f92ea
Merge pull request #17065 from PX4/pr/fix-mavlink-shell
...
MAVLink shell: Ensure that nothing is written to the file handles during shell creation.
2021-03-15 09:47:58 +01:00
2257c3767e
simple gyro auto calibration module
2021-03-15 09:46:47 +01:00
cfb3099870
boards: mRo pixracer pro restore USART6, but RX only
2021-03-14 16:32:22 -04:00
28681405ae
nxp_fmuk66-v3:Disable CONFIG_MMCSD_MULTIBLOCK (_DISABLE=y)
2021-03-12 20:45:45 +01:00
3e443f7dcc
nxp_fmuk66-e:Disable CONFIG_MMCSD_MULTIBLOCK (_DISABLE=y)
2021-03-12 20:45:45 +01:00
f8eaa6e46b
ROMFS handle bl_update generically
...
- include all available legacy bootloaders
2021-03-11 00:38:18 +01:00
4d288512b5
add board architecture specific init defaults
2021-03-09 19:59:41 +01:00
440e72e697
boards: cuav nora/x7pro don't have low speed external (LSE) oscillator
2021-03-09 10:49:57 -05:00
a0b9b44ff6
boards: stm32h7 set CONFIG_SDMMC1 consistently
2021-03-09 09:37:05 -05:00
12a4b0334f
px4_fmu-v6u:Use Auto LSE Drive setting
2021-03-05 15:40:09 -05:00
2af106d888
px4_fmu-v6x:Use Auto LSE Drive setting
2021-03-05 15:40:09 -05:00
d94ff14e6b
px4_fmu-v5x:Use Auto LSE Drive setting
2021-03-05 15:40:09 -05:00
f44a299e3b
px4_fmu-v5:Use Auto LSE Drive setting
2021-03-05 15:40:09 -05:00
c2a5b5ed88
holybro_durandal-v1:Use Auto LSE Drive setting
2021-03-05 15:40:09 -05:00
9d0a8928bd
Update chip type
...
Update chip type from NI to II.
2021-03-05 21:28:36 +01:00
0958b30804
Fix i2c4 bus
...
Fix i2c4 bus (and subsequent CI errors)
2021-03-05 21:28:11 +01:00
2bf508061a
Update i2c bus
...
Change internal bus 2 to external.
2021-03-05 21:28:11 +01:00
17b48102f4
Update i2c mapping and i2c clock source
...
i2c4 was mapped incorrectly and i2c4 clock source wasn't present.
2021-03-05 21:28:11 +01:00
daf744c678
MRO Control Zero F7 OEM Fixes ( #16977 )
...
* Update i2c 4 pinmap on F7 OEM
Update i2c 4 pinmap
* Fix i2c Internal to External on F7 OEM
Fix i2c Internal to External on F7 OEM
* Add Can2 Silent Pin
Add Can2 Silent Pin
2021-03-05 21:26:15 +01:00
David Sidrane