Daniel Agar
318c7e83b3
support up to PWM 14
...
- generate PWM_MAIN 1-14
- generate PWM_AUX 1-8
- generate PWM_EXTRA 1-8
- px4io and pwm_out directly read configuration parameters
- only available and active physical outputs are actually shown for configuration
- overall saves flash despite adding many new parameters
2021-01-30 15:55:53 +01:00
CUAVcaijie
e30b8495b8
Enable x7pro and nora spi4 DMA
2021-01-29 21:30:12 -05:00
Daniel Agar
f0d1f1d679
boards: disable BDMA on STM32H7 for now
2021-01-28 21:16:23 +01:00
Daniel Agar
e4d223f098
boards: CUAV Nora fix BMI088 orientation
2021-01-17 23:19:18 -05:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
Daniel Agar
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
Daniel Agar
763c3b8fda
boards: start enabling multi-EKF by default on F7/H7
2021-01-10 17:56:34 +01:00
Matthias Grob
7545249215
Add flight_mode_manager to all targets with mc_pos_control
2020-12-30 10:25:08 -05:00
David Sidrane
22bc176885
Added mft for queries
2020-12-02 20:40:23 -05:00
David Sidrane
26e164c3ba
cuav_nora: Use px4_platform_configure
2020-12-02 20:40:23 -05:00
CUAV_gitfishup
e399dbc440
boards: CUAV Nora support cuav_neo_v2_pro and disable CONFIG_STM32H7_BDMA
2020-11-13 09:45:57 -05:00
Daniel Agar
c60743b306
boards: NuttX increase file name max 32 -> 40
2020-11-08 12:51:59 -05:00
David Sidrane
1fa1f8c2c5
durandal-v1:Bootloader init NULL console
2020-10-28 14:25:25 -04:00
David Sidrane
962b90fd75
cuav:Bootloader init NULL console
2020-10-28 14:25:25 -04:00
Daniel Agar
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
Tanja Baumann
b5ebdb8e41
add system command to get and set system time
...
* add system_time command for all boards
2020-09-26 13:09:01 -04:00
Daniel Agar
f04f0c89ca
boards: CUAV Nora/X7pro fix BOARD_DSHOT_MOTOR_ASSIGNMENT
...
- BOARD_DSHOT_MOTOR_ASSIGNMENT isn't needed if there's no remapping
2020-09-24 10:53:54 -04:00
David Sidrane
9bd88c34a9
cuav_nora: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
David Sidrane
2745ffe946
cuav_nora:Add support for DMA on SPI6
2020-09-16 21:32:04 -04:00
David Sidrane
93e3b52515
cuav_nora Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
2020-09-07 23:09:20 -04:00
Daniel Agar
7569722821
iSentek IST8310 magnetometer rewrite
...
- simple state machine to reset, configure, etc
- checked register mechanism (sensor will reset itself on configuration error)
- configured in 16 bit mode (1320 LSB/Gauss instead of 330 LSB/Gauss)
- adjusted orientation handling in driver to match datasheet as closely as possible
- in many external compass units the rotation was wrong and very difficult to actual determine how to set correctly
2020-09-02 13:14:45 -04:00
gitfishup
f3579e473b
boards: CUAV Nora enable UAVCAN
2020-09-01 21:16:17 -04:00
CUAVcaijie
536877cf0a
boards: add UAVCAN timer override mechanism and CUAV X7 add CAN ( #15348 )
...
* X7Pro adds CAN driver
* UAVCAN timer selection moved to default.cmake
* Modify some details about @CUAVcaijie UAVCAN timer selection moved to default.cmake
* Put some timer parameters to micro_hal.h from board_config.h. Fix all h7 boards
Co-authored-by: honglang <honglang@cuav.net>
2020-08-28 12:16:48 -04:00
Daniel Agar
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
Daniel Agar
6937dbc5fd
boards: add CUAV Nora support
2020-08-12 13:02:16 -04:00
