fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-05-15 03:17:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
43,979 Commits 852 Branches 161 Tags
never-task-delete
Commit Graph

70 Commits

Author SHA1 Message Date
PX4 BuildBot 42cdf41d60 update all px4board kconfig 2024-06-18 09:35:41 -04:00
Julian Oes f6b65e68cc boards: update all bootloaders 2024-06-07 13:16:17 +12:00
Julian Oes a9962dc44d boards: update all bootloaders 2024-05-22 18:18:55 +12:00
Jacob Dahl 70304fe715 [mavlink] Parameter to always start on USB (#22234) 
* usb: Added parameter to enable always starting mavlink on USB.

    Refactored cdcacm_init into a module and added a paramter to allow always starting mavlink on
    USB, also added a paramter to choose the mode. The current default behavior is to wait and listen
    for data on USB and auto-detect the protocol (mavlink, nsh, ublox). This results in the mavlink
    stream not starting until something else on the mavlink network sends a packet first. The new
    default behavior is to always start mavlink.

    Added parameters
    MAV_USB_ENABLE -- default 1 (always start mavlink on USB)
    MAV_USE_MODE -- default 3 (onboard)

* added 3 retries for opening serial port in mavlink, removed sleep before sercon

* added DRIVERS_CDCACM_AUTOSTART to ark-v6x default.px4board

* added CONFIG_DRIVERS_CDCACM_AUTOSTART=y to default.px4board for boards with CONFIG_CDCACM in their nsh/defconfig

* format

* remove PGA460 from COMMON_DISTANCE_SENSOR to save flash

* remove LIS2MDL from COMMON_MAGNETOMETER to save flash

* disable CONFIG_DRIVERS_CDCACM_AUTOSTART for fmu-v5 protected.px4board

* moved and renamed parameters, removed mode logic in mavlink

* changed parameter names, added mode none

* remove parameters from mavlink
 2024-05-20 12:35:29 -06:00
Matthias Grob 6e86862b6a boards: unify comments for voltage deviders 2024-03-27 17:15:39 +01:00
David Sidrane 543454f12e stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC 2024-01-30 18:07:57 -05:00
Andrei Korigodskii eeb9c5256a boards: add support for Matek H743 Slim V3 
IMUs were replaced in V3 with 2x ICM42688P. This configuration should
work with all revisions of Matek F743 Slim board, including V1, V1.5
and interim variant of V3 (ICM42688P + ICM42605).

Signed-off-by: Andrei Korigodskii <akorigod@gmail.com>
 2023-10-13 20:59:59 -04:00
Silvan Fuhrer 563fd8427a boards: increase init stack size by 100B 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-10-02 09:37:06 +02:00
Igor Mišić c1dbe177b8 boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
alexklimaj 3d61ab84c4 Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 2023-08-30 11:40:01 -04:00
Beat Küng c95539e8ce boards: increase init stack size by 150B 
External airframes need a bit more stack due to nested configs.
 2023-06-09 21:11:11 -04:00
Beniamino Pozzan 9e5420bbbd microdds_client: rename to uxrce_dds_client 
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
 2023-05-03 11:51:53 -07:00
Thomas Stastny 82fd2987c9 fw pos control: revert name until we delineate this module a bit more (#21442) 2023-04-13 17:00:04 +02:00
Alex Klimaj ea97a38b2b Initial Cannode PWM Support (#19748) 
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
 2023-03-15 11:20:07 -04:00
Konrad 3e200bca0d fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming. 2023-02-09 17:51:55 +01:00
Daniel Agar 3822ef1519 boards: update all in tree bootloaders 2023-01-19 17:25:39 -05:00
Daniel Agar 45912066d2 fix copyright header year range 2023-01-14 09:16:16 -05:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
PX4 BuildBot e6c4416250 update all px4board kconfig 2023-01-07 21:53:01 -05:00
Daniel Agar dc5ce9b0ce boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes 
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
 2023-01-07 12:07:35 -05:00
JaeyoungLim 21e88f64b4 Add new fixed wing rate control module (fw_rate_control) 
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-04 11:14:00 -05:00
Daniel Agar 40e3503c39 boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration) 2022-12-29 12:50:37 -05:00
Daniel Agar 0fbb6db6d4 boards: update all NuttX defconfig (make all_olddefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar c2f15f5957 boards: update all px4boards (make all_px4_savedefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar 41fa53605c boards: rebuild STM32H7 bootloaders and px4-io-v2 2022-12-09 11:02:21 -05:00
Daniel Agar 2cb4ef0629 NuttX 10.3+ upgrade (#20190) 
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
 2022-11-20 20:28:07 -05:00
Daniel Agar cea185268e msg ROS2 compatibility, microdds_client improvements (timesync, reduced code size, added topics, etc), fastrtps purge 
- update all msgs to be directly compatible with ROS2
 - microdds_client improvements
   - timesync
   - reduced code size
   - add to most default builds if we can afford it
   - lots of other little changes
 - purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
 2022-10-19 19:36:47 -04:00
matthewoots b09329f287 boards/matek/h743: add fix to resolve no startup of imu for matek_h743 target (#20184) 
* Add fix for matek_h743 target that resolves no startup of imu for h743-wing v3 and h743-wlite boards
* Added imu driver according to spi bus (https://www.mateksys.com/?portfolio=h743-wing-v2#tab-id-7)
 2022-09-09 13:02:38 -04:00
Daniel Agar d3312f955f delete systemcmds/pwm 2022-09-09 09:14:09 -04:00
Daniel Agar 5dd1e5a018 delete systemcmds/mixer 2022-09-09 09:14:09 -04:00
Igor Mišić f929017618 boards: link missing arch_io_pins lib 2022-07-31 11:19:20 -04:00
alexklimaj 4cc3e78558 Add mag bias estimator to CAN GPS units with IMUs 
- run `sensors` hub to process sensor_mag and publish vehicle_magnetometer
 - update uavcannode to use vehicle_magnetometer
 2022-06-19 15:46:36 -04:00
Daniel Agar 5b6e5a0968 boards: NuttX update all boards to preallocated sem holder list 
- CONFIG_SEM_PREALLOCHOLDERS=32
 - CONFIG_SEM_NNESTPRIO=16 (default)
 2022-05-31 01:41:07 -07:00
David Sidrane 479b52fd02 Update all H7 Bootloders 2022-05-27 14:25:25 -04:00
David Sidrane fd81951391 boards: STM32H7 pad to 256 bit - 32 bytes (#19724) 2022-05-27 14:04:51 -04:00
achim 3fe4c6e3f5 boards: matek h743-mini specify drivers to still fit to flash 
- the code has become a bit bigger again that now the drivers have to be specified a bit more precisely to still fit into the flash.
 2022-05-13 14:05:04 -04:00
Daniel Agar 6d390f393c boards: matek_h743-mini_bootloader fix NuttX CONFIG_ARCH_BOARD_CUSTOM_DIR 2022-05-10 11:28:26 -04:00
Daniel Agar 5778553508 boards: matek_h743_bootloader fix NuttX CONFIG_ARCH_BOARD_CUSTOM_DIR 2022-05-10 11:26:15 -04:00
achim 9c12c2a152 boards: matek h743 update unified target 2022-05-06 14:57:37 -04:00
achim 76cf4332d9 boards: matek_h743-mini sync all Matek H743 boards 2022-05-06 14:56:20 -04:00
achim a71cf21c28 boards: matek_h743-slim_default try to fit as many modules of all categories as possible into the flash. 2022-05-06 10:13:30 -04:00
achim 87ebf17ab0 boards: matek h743 enable 12 pwm outs on slim and wing V1.0 and V1.5 2022-05-06 10:10:59 -04:00
achim fc887a23af boards: matek h743 mini 2022-05-06 10:09:14 -04:00
achim bf8d759d3d boards: matek h743 slim support v1 and v1.5 IMU variants 
- remove temp compensation to still fit into flash
 2022-05-04 14:05:16 -04:00
Daniel Agar 7bb789cb23 boards: update bootloaders to latest 2022-04-25 22:39:25 -04:00
Ryan Johnston 777540bd02 boards/matek/gnss-m9n-f4: RM3100 orientation fix 
- the RM3100 needs to be pitched 180º for correction orientation on this board.
 2022-04-09 14:22:21 -04:00
Ryan Johnston c585758f67 boards/matek/gnss-m9n-f4: IMU orientation update 
- the icm20602 needs to be rolled 180º and yaw 90º for this board.
 2022-04-09 14:21:45 -04:00
Charles Cross f31f3370ef Add support for Timer15 on H743 boards (#19228) 
* Adds Timer15 to stm32_common, if the timer base is defined
* Adds Timer15 logic for DMA and AltFunc config on stm32h7 boards
* Adds TIM15 BDTR->MOE support in stm32_common timer init
* Adds support for TIM15 pwm channels on Matek H743 Slim
 2022-02-21 16:52:38 -05:00
Daniel Agar abfa3d23a5 boards: matek h743-slim fix STM32_SDMMC_SDXFR_CLKDIV typo 2022-02-16 10:28:01 -05:00
Charles Cross f9feb04f8b Changes SDIO clock speed to 20MHz for the Matek H743 slim 
Signed-off-by: Charles Cross <charles@missionrobotics.us>
 2022-02-15 09:38:09 -08:00