32ae00fd44
Move Vehicle Command Result Enum defs to Vehicle Command Ack ( #19729 )
...
- As it is always only used for the vehicle command ack message
- It was a duplicate, hence making it error prone for maintainment
- The uORB message comments were updated to make the relationship with
the MAVLink message / enum definitions clear
2022-07-07 16:15:11 +02:00
d5839e2dd5
optical flow sensor pipeline overhaul
...
- all sources of optical flow publish sensor_optical_flow
- sensor_optical_flow is aggregated by the sensors module, aligned with integrated gyro, and published as vehicle_optical_flow
Co-authored-by: alexklimaj <alex@arkelectron.com >
2022-06-20 20:56:56 -04:00
4dbe6f0a1c
simulator_mavlink: fix MAV_TYPE_VTOL_TAILSITTER case
...
This type (23) doesn't specify a motor number, so it can't be properly handled.
There are duo (19) and quad (20) tailsitter types that still work in simulation.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2022-05-24 17:58:44 -04:00
4640f395d7
simulator_mavlink: Add ESC telemetry
2022-05-12 07:58:56 +02:00
f390f52058
drivers/differential_pressure: remove lib/drivers/airspeed dependency and cleanup
...
- split ms4525_airspeed into separate ms4515 and ms4525 drivers
2022-04-26 08:39:19 -04:00
d1d15a6f6d
differential pressure remove filters from drivers and average in sensors/airspeed
2022-04-26 08:39:19 -04:00
98623f69a3
update mavlink submodule to latest
...
- update MAV_TYPE VTOL usage for current mavlink
2022-04-07 20:35:41 +02:00
18074dec5a
simulator: fix conversion from hPa to Pa
...
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2022-03-29 17:41:54 +03:00
0c31f63896
sensors: add baro calibration and cleanup
...
- sensor_baro.msg use SI (pressure in Pascals)
- update all barometer drivers to publish directly and remove PX4Barometer helper
- introduce baro cal (offset) mainly as a mechanism to adjust
relative priority
- commander: add simple baro cal that sets baro offsets to align with
GPS altitude (if available)
- create new sensors_status.msg to generalize sensor reporting
2022-03-26 16:08:41 -04:00
9b629a9e95
hitl,sitl,sih: use separate actuator_outputs_sim for SYS_CTRL_ALLOC==1
...
- removes the need to do type-specific rescaling of pwm to normalized values
- allows to run physical output drivers alongside HIL/SIH
2022-02-25 08:30:58 +01:00
9449ed6e66
Add support for protected build in drivers, systemcmds and modules Kconfig
...
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2022-02-18 07:58:58 +01:00
52a9040c62
BatterySimulator: recharge battery upon disarming
2022-01-31 20:27:06 -05:00
90358f078f
add odometry reset counter (ekf2, mavlink, etc)
2022-01-31 09:19:36 -05:00
e731fcdbc0
sensors (accel/gyro/mag) determine if external with device id
2022-01-10 10:31:07 -05:00
a6431ab8f0
simulator: fix implicit-const-int-float-conversion
2021-12-20 10:56:24 -05:00
167edcc77b
simulator: add standalone sensor_gps_sim module
2021-12-11 15:03:15 -05:00
95b961c622
simulator: add standalone sensor_baro_sim module
2021-12-11 15:03:15 -05:00
4edfb4799f
simulator: add standalone sensor_mag_sim module
2021-12-11 15:03:15 -05:00
a4ca298ee9
simulator_mavlink: handle MAV_TYPE_VTOL_RESERVED3
2021-12-10 09:03:08 -05:00
fdc40880d0
battery: separate out publishing from updating
...
to allow smart battery drivers to use the battery class and
filling in additional information in case it makes sense.
2021-12-07 21:06:51 +01:00
e70d70468a
battery: pass voltage and current by setter
2021-12-07 21:06:51 +01:00
39641494da
battery: pass connected flag in by setter
2021-12-07 21:06:51 +01:00
38d23f5345
battery: pass priority in by setter
2021-12-07 21:06:51 +01:00
f9fc9a9af6
battery: pass source in by constructor
2021-12-07 21:06:51 +01:00
b965923c08
battery: fetch throttle value inside of class
2021-12-07 21:06:51 +01:00
10ceea2fe6
geo: refactoring on comments and usage
2021-12-06 14:30:14 +01:00
8db7a6225b
geo: Moved the map_projection_* functions and state into a self-contained C++ class
2021-12-06 14:30:14 +01:00
7a1a4ea7a6
Format fix & Remove redundant lines
2021-11-20 16:13:46 +01:00
51ce8306ee
Remove redundant code out of hil_lpos
2021-11-20 16:13:46 +01:00
b2c5919d29
Update src/modules/simulator/simulator_mavlink.cpp
...
Co-authored-by: JaeyoungLim <jalim@ethz.ch >
2021-11-20 16:13:46 +01:00
160fec5f25
Update simulator_mavlink.cpp
2021-11-20 16:13:46 +01:00
6e2060ddb6
Add accel to vehicle_local_position_groundtruth
...
Related Issue: #18527
According to [this doc](https://github.com/mavlink/c_library_v2/blob/92b1a43468e8737da2d4cc1e72304e6443dcfdd3/common/mavlink_msg_hil_state_quaternion.h#L102 ), the *acc value are mili-Gee, so multiply the value with `CONSTANT_ONE_G/1000.0f` would get the acceleration in `m/s`.
2021-11-20 16:13:46 +01:00
5969508fa7
mavlink: cmake generate mavlink headers at build time
...
- mavlink/mavlink is now directly included as a submodule instead of the generated mavlink/c_library_v2
- this also switches to mavlink development.xml by default
2021-11-05 23:01:38 -04:00
d5e3e9a7bc
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
...
Which is better for versioning and decomposability
2021-10-07 10:09:01 -04:00
089c962d92
px4io: moving mixing to FMU side
...
Using mixers on the IO side had a remote benefit of being able to
override all control surfaces with a radio remote on a fixed wing.
This ended up not being used that much and since the original design
10 years ago (2011) we have been able to convince ourselves that the
overall system stability is at a level where this marginal benefit,
which is not present on multicopters, is not worth the hazzle.
Co-authored-by: Beat Küng <beat-kueng@gmx.net >
Co-authored-by: Daniel Agar <daniel@agar.ca >
2021-09-25 19:15:05 -04:00
65745a3676
purge broken qurt support and atlflight boards
2021-07-16 08:53:36 -04:00
883624d915
lib/geo: move from ecl
2021-07-15 10:38:24 -04:00
dbaed99626
cmake remove git_ecl target
2021-07-13 10:03:06 -04:00
f41c294028
BatterySimulator: No need to explicitly mention throttle being set to zero
2021-07-01 14:24:38 +02:00
39c96a8884
gps add device_id
2021-04-08 08:27:07 +02:00
a7e920d276
Updated MavlinkReceiver::handle_message_landing_target to warn users when they provide a landing target with an unsupported coordinate frame.
...
Updated Simulator::handle_message_landing_target to warn users when they provide a landing target that is not relative to a captured image.
2021-04-06 16:02:54 -04:00
4189eb11f5
simulator: GPS populate all sensor_gps fields (alt_ellipsoid, etc)
2021-04-06 09:44:18 -04:00
292a66ce41
Add support for simulators running on a different host than the PX4 instance
2021-03-31 20:56:38 -04:00
629f7ba15b
params: ensure short description is only a single line
...
So a UI can display it properly
2021-03-23 12:55:11 -04:00
063bb75891
simulator: fix lidar sensors
2021-03-08 21:27:39 -05:00
263b00b65f
ekf2 support SET_GPS_GLOBAL_ORIGIN and remove globallocalconverter usage
...
- vehicle_command cmd extended from uint16 to support PX4 internal commands that don't map to mavlink
2021-03-05 18:25:14 -05:00
9d47f7ecda
simulator: make first accel/gyro simulated FIFO
2021-02-26 18:40:37 -05:00
a4745c6825
Simulator: Fix for arg count increase breaking remote host option.
...
The number of arguments was increased by one, see: https://github.com/PX4/PX4-Autopilot/commit/1719ff9892f3c3d034f2b44e94d15527ab09cec6
Because the above commit was merged before https://github.com/PX4/PX4-Autopilot/pull/15443 . It broke support for the remote host option.
This has been fixed in this commit by increasing all argv's by one.
Signed-off-by: Peter Blom <peterblom.mail@gmail.com >
2021-01-28 08:32:14 +01:00
e49717513c
simulator: Fix distance sensor device_id
...
Also add DRV_DIST_DEVTYPE_SIM
2021-01-27 17:02:20 -05:00
f9e07337f8
fix submarine sitl: indicate motor channel range 0..1 or -1..1 in simulation_mavlink.cpp ( #16637 )
...
change motor_count variable to 'pos_thrust_motor_count'
This is more specific to what is actually happening in the code.
'pos_thrust_motors_count' indicates number of motor channels which are configured with 0..1 range (positive thrust) all other motors are configured for -1..1 range
submarine only have motors with -1..1 range.
Thus, pos_thrust_motor_count = 0
Co-authored-by: Thies Lennart Alff <33184858+lennartalff@users.noreply.github.com >
2021-01-25 14:17:24 +01:00
Junwoo Hwang