This system command will display, set and save the network
settings.
netman show - Displays the current settings.
netman update - Will check for a net.cfg file on the SD card.
If present, it will update the paramaters,
delete the file, and reboot. Using the new settings.
netman save - Saves the current settings to net.cfg on the SD card.
This file shoulf be renamed to preserver it across
reboots or editited to chech networkin paramates.
File format is name<space>value:
echo DEVICE=eth0 > /fs/microsd/net.cfg
echo BOOTPROTO=fallback >> /fs/microsd/net.cfg
echo IPADDR=192.168.0.4 >> /fs/microsd/net.cfg
echo NETMASK=255.255.255.0 >>/fs/microsd/net.cfg
echo ROUTER=192.168.0.254 >>/fs/microsd/net.cfg
echo DNS=192.168.0.254 >>/fs/microsd/net.cfg
Valid values for `proto` are `dhcp`, `static`, `falback`
Both will try dhcp for CONFIG_NETINIT_FALLBACK times
and fall back to the static address.
NETMASK - is the network mask.
IPADDR - this nodes ip address for static or fall back.
ROUTER - The default route.
DNS - The address of the dns server.
- generate PWM_MAIN 1-14
- generate PWM_AUX 1-8
- generate PWM_EXTRA 1-8
- px4io and pwm_out directly read configuration parameters
- only available and active physical outputs are actually shown for configuration
- overall saves flash despite adding many new parameters
Add new DeviceBusType_SERIAL to Device::DeviceId union
Add DRV_DIST_DEVTYPE's for all distance sensors
Change distance_sensor_s.id to distance_sensor_s.device_id
Modify all distance_sensor drivers to apply 'proper' device_id
* extend uuv_att_control
* add feedthrough thrust_y + thrust_z direction
* extend uuv_att_control
* add feedthrough thrust_y + thrust_z direction
* update formatting
* fix submarine sitl: indicate motor channel range 0..1 or -1..1 in simulation_mavlink.cpp (#16637)
change motor_count variable to 'pos_thrust_motor_count'
This is more specific to what is actually happening in the code.
'pos_thrust_motors_count' indicates number of motor channels which are configured with 0..1 range (positive thrust) all other motors are configured for -1..1 range
submarine only have motors with -1..1 range.
Thus, pos_thrust_motor_count = 0
Co-authored-by: Thies Lennart Alff <33184858+lennartalff@users.noreply.github.com>
* extend uuv_att_control
* add feedthrough thrust_y + thrust_z direction
* update formatting
Co-authored-by: Thies Lennart Alff <33184858+lennartalff@users.noreply.github.com>
David Sidrane