fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
39,464 Commits 852 Branches 161 Tags
Commit Graph

39464 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Michael Schaeuble
ebb657bcf4 Fix camera trigger via MAVLink when camera capture feedback is enabled 
- camera_trigger module always publishes the camera_trigger msg (independent of the camera feedback)
- Use camera_trigger msg and set the feedback flag
- Subscribing modules determine if the message is relevant based on the feedback message
 2021-12-17 07:56:08 +01:00
Michael Schaeuble
3e4031cf0f Set rtc_edge_time also in capture_callback 
When using an FMU channel as PPS capture GPIO, the rtc_edge_time is now set as well. The delay between actual capture and callback is compensated with the elapsed time of the rtc clock.
 2021-12-17 07:56:08 +01:00
Thomas Debrunner
43bc6db99e PPS capture: Add a param to enable / disable PPS capture module. This is important, since it takes over an FMU pin which can no longer be used for actuator output. 2021-12-17 07:56:08 +01:00
Igor Mišić
298a8c4637 boards/fmu-v5x: allocating PPS pin 
- start pps_capture before pwm_out
 2021-12-17 07:56:08 +01:00
Igor Mišić
60a212f717 px4_arch: add PX4_MAKE_GPIO_EXTI 2021-12-17 07:56:08 +01:00
Igor Mišić
c6098ef3dd camera_capture: update to use PPS correction for UTC time 2021-12-17 07:56:08 +01:00
Igor Mišić
8eca35111e camera_trigger: update to use PPS correction for UTC time 2021-12-17 07:56:08 +01:00
Igor Mišić
72b1db4a63 pps_capture: implementation of pulse per second capture driver 2021-12-17 07:56:08 +01:00
Daniel Agar
43a04c9bca fix PARAM_PREFIX for boards with px4io (CONFIG_BOARD_IO) 2021-12-16 07:20:12 +01:00
Daniel Agar
ecc2ca7f98 mathlib: int16_t negate explicitly handle both INT16_MIN and INT16_MAX 
- technically negating INT16_MAX doesn't need special handling, but
this ensures any simple saturation logic downstream works by default
 2021-12-15 12:45:58 -05:00
Daniel Agar
d59d16a6cd drivers/accelerometer: adjust int16_t clipping threshold slightly 
- consider data clipped/saturated if it's INT16_MIN/INT16_MAX or within 1
 - this accommodates rotated data (|INT16_MIN| = INT16_MAX + 1) and sensors that may re-use the lowest bit for other purposes (sync indicator, etc)
 2021-12-15 12:45:58 -05:00
Daniel Agar
ea29b45282 ekf2: enable mag check by default, but commander only warn 2021-12-15 09:43:46 -05:00
Daniel Agar
3fba7288af ekf2: selector use hysteresis for healthy flag 
- require that an instance is healthy continuously for >= 1s before
allowing it to be used
 2021-12-14 09:52:36 -05:00
Thomas Debrunner
eb69f15d3a health-flags: Increase health flags to 64 bit bit field to support extended sys status mavlink message 
Add SYS_STATUS flag for parachute
 2021-12-14 09:41:12 -05:00
Thomas Debrunner
37099f85b9 mavlink: Update to newest mavlink master 2021-12-14 09:41:12 -05:00
Silvan Fuhrer
e9b9176ce2 param translation: fix for FW_GPSF_LT and FW_GPSF_R 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-12-14 08:27:04 +01:00
Jukka Laitinen
ce6147f570 uORB: Remove transfer of memory allocation ownership to CDev 
- Allocate and free the node name in uORBDeviceNode.
- Add protected build support by de-allocating the name with kmm_free, when
  running in kernel side. strdup allocates from the kernel heap in NuttX kernel
  space.
- Remove the CDev::unregister_driver_and_memory(), it is no longer used

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-12-13 22:52:36 -05:00
Jukka Laitinen
25c10eb124 cdev: build & link fixes for NuttX protected build 
- Always link to nuttx_fs for register/unregister_driver calls

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-12-13 22:52:36 -05:00
Daniel Agar
acdcc35392 tests: dataman fix ssize_t printf 2021-12-13 22:51:23 -05:00
alexklimaj
6133ef0d63 Dronecan fix beep driver 2021-12-13 14:52:46 -05:00
bresch
67a893ac6d WelfordMean: remove unnecessary case for first sample 
setting the mean to the sample value and then adding 0 is the same as
setting the mean to zero and then add the sample value divided by 1
 2021-12-13 11:42:48 -05:00
bresch
5468841aa5 WelfordMean: add unit test 2021-12-13 11:42:48 -05:00
Daniel Agar
fc17797548 ekf2: delete obsolete _bad_vert_accel_detected 2021-12-13 09:13:39 -05:00
Daniel Agar
986cf288da
dataman: remove obsolete persistence and reset reason 2021-12-12 12:06:35 -05:00
Daniel Agar
ad1bfb5410 Tools/HIL/reboot.py retry every 90 seconds for up to 5 minutes 2021-12-12 11:53:01 -05:00
96moustafa
63189067f6 set the transponder_report message of uavs with no icao address to be their mav id 2021-12-11 15:29:43 -05:00
Daniel Agar
167edcc77b simulator: add standalone sensor_gps_sim module 2021-12-11 15:03:15 -05:00
Daniel Agar
95b961c622 simulator: add standalone sensor_baro_sim module 2021-12-11 15:03:15 -05:00
Daniel Agar
4edfb4799f simulator: add standalone sensor_mag_sim module 2021-12-11 15:03:15 -05:00
Daniel Agar
b71b908ac7 Tools/HIL: explain cmd, use monotonic time 2021-12-11 15:02:49 -05:00
Daniel Agar
0f6e30599c
Jenkins: hardware tolerate px4_fmu-v5_debug dataman failures for now 2021-12-10 10:28:19 -05:00
bresch
66290de745 ekf: improve range primary height source 
allow range fusion to start with fake measurements if the sensor is
providing bad measurements because too close to the ground
 2021-12-10 15:18:10 +01:00
bresch
9147d5ea5c ekf2: use ground as ekf altitude datum when in range primary hgt mode 2021-12-10 15:18:10 +01:00
bresch
5e790da634 ekf2: reset the timeout timer in the reset function directly 2021-12-10 15:18:10 +01:00
bresch
0d874cf00a ekf2: move aiding start details in dedicated function 
When an aiding source needs to be started, simply call the corresponding
starting function and any required reset is handled in there.
 2021-12-10 15:18:10 +01:00
Matthias Grob
897775f38d ManualControlSelector: Allow disabling stick input 2021-12-10 09:11:08 -05:00
Matthias Grob
300e439144 ManualControlSelector: Enable original PX4 default behavior until QGC catches up 2021-12-10 09:11:08 -05:00
Daniel Agar
d961a067b9 navigator: reduce NUM_MISSIONS_SUPPORTED 2000->500 for dataman RAM usability 2021-12-10 09:10:02 -05:00
Daniel Agar
ca3f6f59f9 dataman: add SYS_DM_BACKEND parameter 2021-12-10 09:10:02 -05:00
Beat Küng
f76086ffa1 microRTPS_agent_CMakeLists.txt.em: add install section 2021-12-10 09:03:08 -05:00
Beat Küng
a9e918c7b2 fix ina226: use shunt param value 2021-12-10 09:03:08 -05:00
Beat Küng
a4ca298ee9 simulator_mavlink: handle MAV_TYPE_VTOL_RESERVED3 2021-12-10 09:03:08 -05:00
Beat Küng
7aed8c4f47 sd_bench: print errno on write failure 2021-12-10 09:03:08 -05:00
Beat Küng
80300c36b4 parameter units: add 'A' (Ampere) 2021-12-10 09:03:08 -05:00
Beat Küng
10f49c99ef px4_add_gtest.cmake: add optional COMPILE_FLAGS, INCLUDES, EXTRA_SRCS and LINKLIBS 2021-12-10 09:03:08 -05:00
Beat Küng
87ec8839c4 px4/fmu-v5x: remove unused base_phy_DP83848C build variant 2021-12-10 09:03:08 -05:00
Igor Mišić
d1aec01b86 uavcan/actuators: stop update esc status if there is no UAVCAN ESCs 2021-12-10 09:03:08 -05:00
Beat Küng
aa96e39306 kconfig: do not inherit for recovery.px4board from default.px4board 2021-12-10 09:03:08 -05:00
Beat Küng
ca6df035b4 px4/fmu-v5x: add arch_io_pins dependency (required in init.cpp) 2021-12-10 09:03:08 -05:00
Beat Küng
0d1d454a4c mavlink: add missing 'sensor_calibration' lib dependency 2021-12-10 09:03:08 -05:00