495f1c9165
battery: don't initialize _source without constructor
2021-12-07 21:06:51 +01:00
b41e345a5b
battery: correct updateBatteryStatus() description
2021-12-07 21:06:51 +01:00
fdc40880d0
battery: separate out publishing from updating
...
to allow smart battery drivers to use the battery class and
filling in additional information in case it makes sense.
2021-12-07 21:06:51 +01:00
e70d70468a
battery: pass voltage and current by setter
2021-12-07 21:06:51 +01:00
39641494da
battery: pass connected flag in by setter
2021-12-07 21:06:51 +01:00
38d23f5345
battery: pass priority in by setter
2021-12-07 21:06:51 +01:00
f9fc9a9af6
battery: pass source in by constructor
2021-12-07 21:06:51 +01:00
b965923c08
battery: fetch throttle value inside of class
2021-12-07 21:06:51 +01:00
ddc6b6bc9c
battery: move MAVLink specific handling out of battery class
2021-12-07 21:06:51 +01:00
da2fdf923e
battery parameters: allow usage of 1S battery
2021-12-07 21:06:51 +01:00
91c48606ee
battery_status: clearly define and handle zero remaining flight time
2021-11-15 15:44:02 +01:00
73287e8e8c
battery: compute remaining flight time
2021-11-15 15:44:02 +01:00
40f9b53b90
Remove a couple of unnecessary reboot_required from parameter meta data
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2021-08-13 10:35:43 -04:00
e9f84ba708
keep minimal legacy battery parameters for older QGC usability
...
- BAT_V_EMPTY, BAT_V_CHARGED, BAT_V_LOAD_DROP, BAT_N_CELLS
2021-07-23 15:07:53 -04:00
b5430c22c4
AlphaFilter: move from ecl -> mathlib
2021-07-15 10:38:24 -04:00
c5b1fe86ca
delete deprecated BAT_* parameters
2021-07-08 22:19:12 -04:00
62546350f1
battery: use local instead of global member battery_status message
2021-07-01 14:24:38 +02:00
fa976f84b1
battery: clear interface for determineWarning()
2021-07-01 14:24:38 +02:00
b824f33ae9
battery: publish measured values also when battery not connected
2021-07-01 14:24:38 +02:00
a99ddd0845
battery: don't reset on every loop iteration
2021-07-01 14:24:38 +02:00
8d74e52bb7
battery: omit separate publish() function
2021-07-01 14:24:38 +02:00
41cc73e555
battery: simplify battery_initialized condition
2021-07-01 14:24:38 +02:00
a51d47f8e8
battery: connected check outside of determineWarning()
2021-07-01 14:24:38 +02:00
17502da493
lib/battery:Fix types
2021-06-16 17:07:47 +02:00
517a1d0116
battery_status: factor in total current consumption in battery remaining estimation
2021-03-15 12:32:45 -04:00
d01806a0c6
lib/battery: Fix cell voltages with >10S
...
Signed-off-by: Alex Mikhalev <alex@corvus-robotics.com >
2021-02-28 22:10:23 -05:00
39b0c7b2bf
battery: report at least one cell for a connected battery
2021-01-18 17:53:17 +01:00
fd261b590c
battery: don't init uint16_t with -1.0f
...
This was flagged as undefined behaviour by fuzz testing.
2020-12-08 09:58:29 +01:00
f776997a07
battery: disable secondary module by default
...
Avoid a GCS showing 2 battery indicators.
Alternatively we could also check the 'connected' flag, but this is more
explicit.
2020-10-20 09:18:47 +02:00
83b81fbbef
battery: fix isFloatEqual(), use matrix::isEqualF
...
Fixes param migration, e.g. if BAT_N_CELLS is set, migrates to
BAT1_N_CELLS.
2020-10-20 09:18:47 +02:00
6ae17eb13c
fix EscBattery: remove _battery.publish();
...
updateBatteryStatus() already publishes
2020-10-20 09:18:47 +02:00
016ee6ea59
battery: fix duplicate uORB publish and minor cleanup
...
- run battery_status module on adc_report publications rather than a fixed schedule
2020-10-05 11:01:58 -04:00
1d562aaf4a
battery: switch to PublicationMulti for battery_status
2020-09-01 10:25:03 +02:00
9c4e26c00c
battery: fix parameter migration and clarify
2020-09-01 10:25:03 +02:00
979243f38f
params: make parameter units more consistent ( #15502 )
2020-08-24 11:33:08 +02:00
27f23ac290
move initial sensor priority to parameters and purge ORB_PRIORITY
...
- CAL_ACCx_EN -> CAL_ACCx_PRIO
- CAL_GYROx_EN -> CAL_GYROx_PRIO
- CAL_MAGx_EN -> CAL_MAGx_PRIO
2020-08-21 10:12:13 -04:00
bcd771d832
Update ecl and adapt to new AlphaFilter location
2020-06-17 09:29:35 -04:00
b607630ee7
battery_params: relax maximum for capacity thresholds
2020-06-05 09:55:24 -04:00
88c21337fa
Make all battery sensor drivers report their sample interval
...
To make use of the time abstraction in the leaky integrator.
2020-05-25 11:04:24 +02:00
4dc9ca69ab
battery: use AlphaFilter class
...
Replace the filtered value calculations with calls to the class.
This will allow time abstraction.
2020-05-25 11:04:24 +02:00
5927bb3635
battery: add requirements to ESCs as battery
2020-04-06 15:56:54 +02:00
f650b91718
battery: check source param inside battery lib
...
This moves the handling of the BAT%d_SOURCE param inside of the battery
library. Users of the library now pass the source instead of the flag
whether to publish. The battery library then checks if the source is
selected using the param and publishes accordingly.
Since we removed the strange system_source flag, we now need to look at
all batteries in commander.
For current estimation - I think - it makes sense to sum them up.
2020-04-06 15:56:54 +02:00
dcd34ed08d
battery: add ESCs source, remove wrong unit
2020-04-06 15:56:54 +02:00
49d22edc33
battery: cell voltage fill refactor
2020-03-31 09:14:50 +02:00
14a61a6695
Fixed reporting of battery voltages in uORB
2020-03-31 09:14:50 +02:00
4c1adc088f
Removed all swapping of uORB instances
2020-02-21 22:38:26 -08:00
fc1341208f
INA226: Integrate with PX4 ( #12673 )
...
* Publish I2C battery data as battery_status
2019-12-28 12:30:11 -05:00
de9e4dda4c
battery: delete unused armed
2019-12-12 09:48:45 -05:00
11bbc8ae34
Code cleanup
2019-12-12 04:39:53 -08:00
993fa5bd37
Refactored to work with new battery_status module
2019-12-05 16:38:04 +01:00
Matthias Grob