Commit Graph

31308 Commits

Author SHA1 Message Date
Beat Küng db49e5abcd fix commander: run preflight checks on GCS connection
Regression from 6dec451bab, leading to
preflight failures not being reported at all. Only after a failed arming
attempt the messages would be sent. And for GPS check failures, in case
they are set to optional (default), arming would be possible, but switching
to position would be rejected w/o error.

We need to run the preflight checks periodically, but this at least restores
the previous behavior.
2020-01-25 11:17:33 +01:00
Beat Küng 2a67d22ac7 commander powerCheck: simplify logic
refactoring only
2020-01-25 11:17:33 +01:00
Beat Küng 9e7dcd4b06 commander: fix prearm flag to preflightCheck
This was inverted, i.e. set to false in most cases, whereas it should be
true.

As a consequence, both powerCheck and airspeed.confidence checks were not
executed.
2020-01-25 11:17:33 +01:00
Daniel Agar 4fef3dd7d5 simulated sensors minor cleanup
- mavlink receiver use PX4Accelerometer/PX4Gyroscope for hil_sensor and hil_state_quaternion
 - simulator module remove unnecessary fake scaling
 - sih module remove unnecessary fake scaling
2020-01-24 12:50:22 -05:00
RomanBapst 27e9b1e3d4 updated ecl 2020-01-24 16:49:17 +03:00
kamilritz 5a5b3a44ee Update flow interface 2020-01-24 16:49:17 +03:00
Julian Oes ab133b41b2 workflows: Install mavsdk from GitHub release 2020-01-24 12:04:47 +01:00
Beat Küng 0542ac0e5f fix simulator_mavlink: orb_copy requires a valid data pointer
orb_copy() just returns if data==nullptr.

Fixes lockstep for ekf2. estimator_status.time_slip now stays constant
after startup, even with high speedup factor and high system load.
2020-01-24 12:04:47 +01:00
Julian Oes 30edcad752 Revert "Simulator: Remove EKF2 based wait"
This reverts commit 1834c156d2.
2020-01-24 12:04:47 +01:00
Julian Oes 30188d2884 Revert "Simulation: Set scheduling policy RR for lockstep"
This reverts commit 742b1839d5.
2020-01-24 12:04:47 +01:00
Julian Oes f64a0982c7 mavsdk_tests: fix build instructions 2020-01-24 12:04:47 +01:00
Julian Oes 0f77e3ba44 mavsdk_tests: actually use chosen model
This does not work for plane yet, and VTOL only acts as multicopter for
now, so doesn't make much sense just yet.
2020-01-24 12:04:47 +01:00
Julian Oes 5589812104 mavsdk_tests: refactor/cleanup
This splits the main function which has become way too long.
2020-01-24 12:04:47 +01:00
mohammad f5a81f5793 capture.result
Boolean indicating success (1) or failure (0) while capturing this image.
2020-01-24 11:42:03 +01:00
Julian Oes 1280351feb mavlink: forward everything except what is for us
The previous forwarding rules exclude another onboard MAVLink node to
send messages to a specific target.

E.g. a message from a companion computer with sysid 1 (same as
autopilot) with target sysid 190 (for the ground station) was not
forwarded.

With the new rules, anything that is not specifically addressed to the
autopilot's sysid and compid is forwarded.
2020-01-24 11:14:44 +01:00
Jacob Dahl 562062b303 batt_smbus: fix potential buffer overrun bug (#13904) 2020-01-24 11:01:25 +01:00
Beat Küng 5cacf17e47 navigator mission: simplify reset logic
This can be simplified because we now only activate Mission while armed.
2020-01-24 08:42:16 +01:00
Beat Küng 92aa341c18 navigator: do not set a mode while disarmed
This avoids premature state machine execution, most notably for missions.

In particular this fixes these issues:
- when landed, and the vehicle has a valid mission: switching to mission
  would execute the first item.
- after executing a mission with a land waypoint, the mission is reset
  and the first item is executed.

In case the first waypoint is a takeoff, it would print a user message:
"Takeoff to x meters above home.". If it was a vehicle command, it would
execute that.
Note that because the vehicle is disarmed, the vehicle would not actually
do anything (except for commands that are accepted while disarmed).
2020-01-24 08:42:16 +01:00
Beat Küng e939f60a9e FlightTaskAuto: accept invalid triplet_setpoint (and interpret as loiter)
This will allow navigator to not output any setpoints while disarmed.
Otherwise the position controller outputs warnings in the form of:
Auto activation failed with error: Activation Failed

The risk here is that it could hide problems, where navigator sends invalid
triplets when it should not.
2020-01-24 08:42:16 +01:00
Beat Küng c0352027fb mc_pos_control: do not warn when going into failsafe while disarmed
It's possible to get invalid or no setpoints from navigator while disarmed.
2020-01-24 08:42:16 +01:00
Beat Küng d68e595514 vehicle_control_mode: fix invalid comment for flag_armed 2020-01-24 08:42:16 +01:00
kritz 47cab3dba5 Update external vision interface (#13989)
* Update external vision interface

* Update ECL Version
2020-01-23 15:36:08 +01:00
kamilritz 9554f8f98b Update ECL version 2020-01-23 13:27:30 +01:00
kamilritz 8d25dcd543 Update EKF auxiliary velocity interface 2020-01-23 13:27:30 +01:00
kamilritz 9d184ea3d6 Update EKF range finder interface 2020-01-23 13:27:30 +01:00
kamilritz 230d7f2558 Update EKF airspeed interface 2020-01-23 13:27:30 +01:00
kamilritz 8772e09963 Update EKF gps interface 2020-01-23 13:27:30 +01:00
kamilritz 19b7421f86 Update EKF baro interface 2020-01-23 13:27:30 +01:00
kamilritz 439a20bfcb Update EKF mag interface 2020-01-23 13:27:30 +01:00
Daniel Agar 009ba638f5 PX4Accelerometer/PX4Gyroscope update FIFO case to trapezoidal integration 2020-01-22 18:35:41 -05:00
Daniel Agar 697dbfb9f8 sensors/vehicle_imu: incremental step towards multi-EKF 2020-01-22 18:04:29 -05:00
RomanBapst 0e90448e52 navigator: add position setpoint reset helper with safe defaults
- use in reset_triplets()
2020-01-22 18:03:25 -05:00
Daniel Agar 98042bf58f uORB: introduce SubscriptionBlocking
- uORB::SubscriptionBlocking is a specialized uORB::Subscription that allows you to do a blocking read
 - this is intended to be an easy to use, hard to misuse replacement for the typical orb fd + poll pattern we've relied on historically
2020-01-22 17:56:28 -05:00
Daniel Agar 036a45377d boards rename auav_x21 -> mro_x21 2020-01-22 15:33:02 -05:00
SalimTerryLi 3ed8e876b7 New pca9685 pwm output driver 2020-01-22 15:19:47 -05:00
Daniel Agar 693d532bba mRo x2.1 777 board support 2020-01-22 15:02:55 -05:00
Claudio Micheli 421a06685c BMM150: Fix priority assignment
Signed-off-by: Claudio Micheli <claudio@auterion.com>
2020-01-22 12:26:49 -05:00
Beat Küng db36edffe8 commander: fix mission topic publication
The local scope caused the topic to be unadvertised, which in turn caused
a copy() failure in navigator and 'mission update failed' printf error.
2020-01-22 12:08:32 -05:00
Beat Küng c61e44f55b commander: fix variable naming 2020-01-22 12:07:51 -05:00
Beat Küng 8bfbfa033c fix commander: avoid LED printf errors on every SITL startup 2020-01-22 12:07:51 -05:00
Beat Küng 67f3234b5b posix cdev_platform: set errno on px4_open failure 2020-01-22 12:07:51 -05:00
Daniel Agar 21a8d7db7f WorkItem modules: Run() shouldn't be public 2020-01-22 12:03:03 -05:00
Martina Rivizzigno 8162b1095b send obstacle distance data in onboard mode such that they are
received by the gcs when using mavlink router
2020-01-22 16:22:32 +01:00
Beat Küng d865d9e64e safety_button: fix missing return when module exits 2020-01-22 09:49:20 -05:00
Beat Küng 35fc51de92 safety_button: add support for pairing command (3x pressing the button) 2020-01-22 09:49:20 -05:00
Tal Zaitsev 65aaf5170c microRTPS: Fix C++11 remnant 2020-01-22 00:30:47 -05:00
Daniel Agar b47eaa6061 update C++ standard (c++11 -> c++14)
- temporarily disable snapdragon builds until toolchain is updated
2020-01-21 21:49:10 -05:00
Daniel Agar cf195b0755 commander: safety button disarm require land detector
- landed, maybe_landed, or ground_contact required before the safety
button is able to disarm
 - this reduces the risk of a faulty safety button triggering in regular
flight
2020-01-21 23:35:25 +01:00
Daniel Agar 4f868fc565 commander: use arm_disarm() helper for safety button disarm 2020-01-21 23:35:25 +01:00
Claudio Micheli 624fcc3adb v5x target: Fix wrong FD for TELEM3
Signed-off-by: Claudio Micheli <claudio@auterion.com>
2020-01-21 23:27:59 +01:00