Daniel Agar
a2442ffb48
board: enable UAVCAN sensors by default on F7/H7
2021-02-02 09:01:12 +01:00
Daniel Agar
763c3b8fda
boards: start enabling multi-EKF by default on F7/H7
2021-01-10 17:56:34 +01:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
2020-09-07 23:09:20 -04:00
Daniel Agar
fbc8e1b09e
boards: mRo X2.1-777 fixes
...
- ardupilot bootloader compatibility (first 3 sectors)
- clock tree fixes
- start mavlink
- start mpu9250 magnetometer (only onboard mag)
- fixes https://github.com/PX4/Firmware/issues/15466
2020-08-09 14:24:49 -04:00
Daniel Agar
6f6efd60b7
boards: centralize optional external I2C sensor start
...
- configured with new parameter SENS_EXT_I2C_PRB
2020-06-10 09:04:13 -04:00
Daniel Agar
7aa7f0ed95
switch remaining boards to new InvenSense IMU drivers
2020-04-07 09:59:12 -04:00
Beat Küng
7626be0485
refactor mpu9250: use driver base class
2020-03-24 09:46:20 -04:00
Beat Küng
8ebde51648
refactor hmc5883: use driver base class
...
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
2020-03-17 23:31:17 -04:00
Beat Küng
969a77f889
refactor mpu6000: use driver base class
2020-03-17 23:31:17 -04:00
Beat Küng
be0a205438
refactor ist8310: use driver base class
2020-03-17 23:31:17 -04:00
Beat Küng
b399698306
ist8310: remove calibration code
...
- it does nothing useful
- increases boot time by 2 seconds on pixhawk 4 due to a poll timeout:
IST8310 on I2C bus 3 at 0x0e (bus: 100 KHz, max: 400 KHz)
WARN [ist8310] ERROR: TIMEOUT 2
2020-02-06 12:39:39 -05:00
Daniel Agar
693d532bba
mRo x2.1 777 board support
2020-01-22 15:02:55 -05:00
Daniel Agar