Commit Graph
89 Commits
Author SHA1 Message Date
Lorenz Meier 89b37fd727 IO: Add missing float header 2016-12-27 21:00:51 +01:00
Andrew Tridgell d150b4b084 px4iofirmware: fixed a bug with override handling
this fixes a race condition between the DMA completion handler
updating registers in px4io and the mixer used for handling the
override state. The register set code could set r_page_servos[]
between the time when pwm_limit_calc() is called and the servos are
actually output.
2016-12-26 16:32:33 +01:00
Lorenz Meier 074e666b95 PX4IO: Robustify firmware for mixer load operation
This change makes the mixer load and reset operation closer to thread-safe. It was guarded one-way before and in only one location. This change ensures that its being locked out from both directions. The accesses to the locking variables still need work because they are non-atomic.
2016-12-26 13:41:36 +01:00
Roman d221313dfb implemented mapping between desired thrust and applied pwm in
multirotor mixer.

Signed-off-by: Roman <bapstroman@gmail.com>
2016-12-15 23:39:53 +01:00
Mark Whitehorn dbc149c224 change trim units from absolute usec to normalized values 2016-12-10 12:56:39 +01:00
Mark Whitehorn a0c8a78a14 use trim values to set mixer:scaler.offset
clamp mixer output offset to [-.2,.2] ([-2000, 2000] in mixer file)

add 8 main PWM trim parameters

add long desc to parameters and bump minor parameter version
2016-12-10 12:56:39 +01:00
Bartosz Wawrzacz 619efa7b45 [PX4IO/PWM driver] Added trim values to the PWM output drivers 2016-12-10 12:56:39 +01:00
Roman c2a511d81d multirotor mixer slew rate limiting: naming and fixes
- avoid dividing by zero when calculating max delta output
- better comments when calculating max delta output
- better naming of functions and variables

Signed-off-by: Roman <bapstroman@gmail.com>
2016-09-30 13:55:53 +02:00
Roman 2607769470 slew rate limiting: moved logic to multirotor mixer
Signed-off-by: Roman <bapstroman@gmail.com>
2016-09-30 13:55:53 +02:00
Roman 66ddea01d1 implemented slew-rate 2016-09-30 13:55:53 +02:00
Julian Oes 78a9472b25 px4iofirmware: astyle 2016-07-29 12:46:17 +02:00
Julian Oes 79a1b84b09 px4iofirmware: clean up override decision
The override checking was scattered across two places and is now unified
in controls_tick(). The part in mixer_tick only decides which mixer (or
none) to use give the override flag.
2016-07-29 12:46:17 +02:00
Andreas Antener af8cd3f880 correctly scale and trim outputs in IO 2016-07-13 09:29:13 +02:00
Roman 08bbd6dbfa px4iofirmware: added scale parameters for roll, pitch and yaw
since pure manual control for fixed wings in handled on the io side
the scale parameters for roll, pitch and yaw had to be introduced there
as well.

Signed-off-by: Roman <bapstr@ethz.ch>
2016-07-13 09:29:12 +02:00
Andrew Tridgell 3f6f030fc4 px4iofirmware: allow override when RAW_PWM is active
if override is enabled then it should apply even if RAW_PWM is being
supplied by the FMU
2016-05-22 13:20:44 +02:00
Andreas Antener a1f4ab21bf fixed code style 2016-03-20 14:48:47 +01:00
Andreas Antener 6782bdaf69 prevent alternate flight control group (1) throttle from being active when safety is disabled 2016-03-20 11:19:23 +01:00
Lorenz Meier daeb4a24f3 Fix code style 2016-02-23 13:17:30 +01:00
Lorenz Meier 168f955e0c IO firmware: Ensure that in case of lockdown only the lockdown code writes servo outputs 2016-02-23 13:09:06 +01:00
Lorenz Meier 59c30a4cbf IO firmware: Output a disarmed pulse on lockdown 2016-02-23 13:09:06 +01:00
Lorenz Meier f2af8a5a5d IO Firmware: Reduce unnecessary buffer space 2016-01-27 09:56:20 +01:00
Lorenz Meier 10a3954232 IO firmware: Depend on external RC lib 2015-11-28 09:13:15 +01:00
Lorenz Meier 083dbbb71b IO firmware: Do mixer load as block operation 2015-11-06 10:24:10 +01:00
Lorenz Meier 948ff80b80 IO firmware: Fix code style 2015-10-19 13:46:32 +02:00
Lorenz Meier 2a8402edb1 Merged beta into master 2015-07-09 15:55:31 +02:00
Lorenz Meier 87b801034f IO firmware: Fix condition for output enable to also allow no throttle arming to enable outputs 2015-07-07 09:50:44 +02:00
Lorenz Meier 0ca6f46ef4 IO: Allow to pre-arm the non-throttle channels with the safety switch 2015-07-06 12:08:31 +02:00
Lorenz Meier 5f586fc354 Mixer library: Fix code style 2015-07-06 10:21:44 +02:00
Lorenz Meier 95eaebb28d Merge branch 'release_v1.0.0' 2015-07-04 10:47:18 +02:00
Lorenz Meier 615affdef9 S.BUS Output: deliver the disarmed PWM values 2015-07-03 23:51:45 +02:00
Lorenz Meier 234990fbe4 Merge branch 'release_v1.0.0' of github.com:PX4/Firmware 2015-07-02 01:00:06 +02:00
Lorenz Meier 6697ffb668 IO driver: Set throttle to zero if in PWM ramp mode 2015-06-30 09:51:19 +02:00
Lorenz Meier c9fefe236b Merged release into master 2015-06-13 11:06:01 +02:00
Lorenz Meier 000434be15 IO mixer: Limit outputs to proper range 2015-06-11 14:52:10 +02:00
Lorenz Meier f0f3ffaec1 IO firmware: Do not apply trim values a second time 2015-06-11 13:31:58 +02:00
Lorenz Meier b46b122808 PX4IO firmware: Support trim parameters for RPY 2015-06-09 14:16:05 +02:00
Lorenz Meier 4565f57468 Merged release_v1.0.0 into master 2015-05-27 15:28:41 -07:00
Lorenz Meier 613b50b14f IO firmware: Support pwm reversal 2015-05-25 16:42:46 +02:00
Mark Charlebois db52227409 Merge remote-tracking branch 'upstream/master' into linux
Signed-off-by: Mark Charlebois <charlebm@gmail.com>

Conflicts:
	src/modules/commander/accelerometer_calibration.cpp
2015-05-06 15:51:39 -07:00
Andreas Antener cd4154d805 Revert "Merge pull request #1819 from PX4/chan16" because of #2113
This reverts commit f8c8876642, reversing
changes made to de3888bed7.
2015-05-05 14:41:53 +02:00
Mark Charlebois 9758112e31 Use px4_config.h instead of nuttx/config.h
Modified code to use OS independent header file for config settings.

Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-04-20 10:55:41 -07:00
Roman Bapst 555e96a37a fixed publication of mixer limit flags 2015-04-10 20:26:38 +02:00
Lorenz Meier c94755c847 PX4IO Firmware: Support 16 output channels 2015-03-15 17:39:42 +01:00
Lorenz Meier 828163f2f5 Update mixing handling to allow IO safety off updates 2014-11-22 16:30:09 +01:00
Lorenz Meier f490331632 Enable flaps, avoid mode switch position 2014-10-16 22:57:27 +02:00
Lorenz Meier 6773eb9880 Introduce FMU initialised status flag, only run failsafe trap if initialized once 2014-08-28 21:39:38 +02:00
Lorenz Meier c85d7aae06 Make sure we got to valid input at least once before kicking in failsafe 2014-08-28 20:36:59 +02:00
Lorenz Meier 91d50301c6 Do not enter RC override if FMU is lost and termination failsafe mode requested 2014-08-27 10:46:10 +02:00
Lorenz Meier 49846d476f IO firmware supports termination failsafe 2014-08-27 08:00:12 +02:00
Lorenz Meier 9a53fd9648 Add force failsafe flag 2014-07-18 11:18:32 +02:00