Lorenz Meier
965a7a4f03
Allow to disable a channel
2013-12-27 21:33:19 +01:00
Lorenz Meier
a9ea39054d
Working around creating an error condition with more than 8 raw RC channels
2013-12-27 21:19:04 +01:00
Lorenz Meier
cddbb0d23f
Merged master
2013-12-27 21:12:51 +01:00
Lorenz Meier
8d2950561d
Changed RSSI range to 0..255
2013-12-25 15:15:15 +01:00
Lorenz Meier
edffade8ce
Added PPM frame length feedback in IO comms and status command - allows to warn users about badly formatted PPM frames
2013-12-25 15:11:48 +01:00
Lorenz Meier
f8134c9c67
Enable 18 channels on IO
2013-12-22 21:12:31 +01:00
Lorenz Meier
6c990d0a6e
Fix usage of wrong constant for RC input channels
2013-12-22 20:44:51 +01:00
Lorenz Meier
999051546a
Fixed compile error
2013-12-21 19:08:52 +01:00
Lorenz Meier
b84c9f962b
Merged master
2013-12-21 19:07:24 +01:00
Lorenz Meier
d6a6d59d2d
Further improved S.Bus scaling
2013-12-14 15:09:20 +01:00
Lorenz Meier
00dc339d2e
Improved S.Bus scaling based on scope measurements
2013-12-14 14:52:57 +01:00
Lorenz Meier
9883a346a0
First stab at implementing better RSSI based connection status estimation, still needs some work and testing
2013-12-13 18:01:55 +01:00
Holger Steinhaus L
a673fa3926
Non-destructive handling of failsafe signals, distinction between frame loss and signal loss.
...
This kind of handling might be moved upstream into the application, once alarms are propagated by the ORB system.
This change is compatible with RX failsafe settings, but does not rely on it (uses SBus flags instead).
2013-12-13 17:30:26 +01:00
Holger Steinhaus L
3a40ea8338
more precise range conversion for SBus input signals
2013-12-13 17:30:14 +01:00
Lorenz Meier
c311462f3c
Added actuator control removal
2013-12-13 16:52:35 +01:00
Andrew Tridgell
5b7d1af5d8
Merged crccheck command
2013-12-13 11:22:14 +01:00
Andrew Tridgell
6016fbe55d
Merged PX4IO crc checks and force update
2013-12-13 11:21:00 +01:00
Thomas Gubler
c033443208
px4iofirmware: improve check for rc controlled channels in manual mode
2013-12-11 16:58:11 +01:00
Thomas Gubler
b69097df38
px4io frimware: improve handling of manual mode when fmu is still healthy, use data from fmu for channels which are not controlled by rc
2013-12-11 16:58:03 +01:00
Thomas Gubler
5e273bf225
px4iofirmware: in manual mode: ignore control indices which are not controlled by the rmeote control
2013-12-08 21:35:16 +01:00
Lorenz Meier
0ba507b640
Added support for a total of four control groups to the IO driver and IO firmware. This allows to run auxiliary payload. Cleaned up defines for RC input channel counts, this needs another sweep to then finally allow up to 16 mapped channels and up to 20-24 RAW RC channels
2013-12-08 11:25:45 +01:00
Andrew Tridgell
d0507296c0
px4io: moved blue heartbeat LED to main loop
...
this allows us to tell if the main loop is running by looking for a
blinking blue LED
2013-11-30 20:18:27 +11:00
Anton Babushkin
e46d60ba6d
px4io driver: don’t use PX4IO_PAGE_ACTUATORS page for actuator_controls_effective
2013-11-15 11:32:05 +04:00
Julian Oes
25bf1abecf
pwm_output: Allow PWM values from 900us to 2100us but use a default of 1000us to 2000us
2013-10-31 10:29:06 +01:00
Lorenz Meier
dc80d6745e
Merge branch 'master' of github.com:PX4/Firmware into pwm_ioctls
2013-10-30 09:15:55 +01:00
Lorenz Meier
44f88bf0a7
Fix to allow setting again zero disarmed PWM values after boot
2013-10-30 09:03:19 +01:00
Andrew Tridgell
9064f8bf09
px4io: fixed the io_reg_{set,get} errors
...
this fixes the PX4IO state machine to avoid the io errors we were
seeing. There are still some open questions with this code, but it now
seems to give zero errors, which is an improvement!
2013-10-28 13:10:23 +01:00
Julian Oes
70ec68ffd0
Merge remote-tracking branch 'px4/master' into pwm_ioctls
...
Conflicts:
src/drivers/px4io/px4io.cpp
2013-10-19 11:39:31 +02:00
Julian Oes
1d3f25ee6c
pwm systemcmd can now set the failsafe values, fmu uses failsafe values as well now, fix to only send the appropriate number of pwm values to IO at once
2013-10-19 10:43:41 +02:00
Jean Cyr
f1c399a60b
Add support for 8 channel DSMX sattelite pairing
2013-10-12 01:14:03 -04:00
Julian Oes
2d23d5fd4e
Merge remote-tracking branch 'px4/master' into pwm_ioctls
...
Conflicts:
src/drivers/px4io/px4io.cpp
2013-10-11 14:05:11 +02:00
Julian Oes
3dc2bdfa22
Changed pwm_limit interface a bit
2013-10-11 10:19:50 +02:00
Julian Oes
1b9e2af742
Moved PWM ramp to systemlib
2013-10-08 17:03:57 +02:00
Julian Oes
19879432ad
Trying to get rid of magic PWM numbers
2013-10-07 18:03:05 +02:00
Julian Oes
ea0aa49b54
pwm info provides more information, some fixes for setting rate/min/max/disarmed
2013-10-07 16:24:49 +02:00
Lorenz Meier
90c4664dce
Merged status changes
2013-10-06 14:17:37 +02:00
Lorenz Meier
f7090db708
Fix the direction of the override switch for the new state machine
2013-09-24 08:22:44 +02:00
Lorenz Meier
9424728af9
Fix a whole bunch of sanity checks across all mixers
2013-09-22 14:20:19 +02:00
Jean Cyr
72df378577
Finally get the #if right!!!
2013-09-18 20:24:33 -04:00
Jean Cyr
390d5b34de
Fix backwards ifdef in dsm.c
2013-09-18 20:14:53 -04:00
Jean Cyr
89d3e1db28
Implement Spektrum DSM pairing in V2
...
- Bind control for V2
- Relays and accessory power not supported on V2 hardware
2013-09-18 20:04:22 -04:00
Andrew Tridgell
e9e46f9c9d
px4io: added monitoring of vservo and vrssi
...
publish via servorail_status ORB topic
2013-09-12 09:24:53 +02:00
Lorenz Meier
c3b6cea77a
Hotfix for S.Bus systems with more than 8 channels
2013-09-10 13:22:56 +02:00
Lorenz Meier
465f161427
Hotfix: remove bogus commit
2013-09-10 12:49:17 +02:00
Julian Oes
589ae937ee
Allow mixer upload when PWM is on
2013-09-02 17:55:27 +02:00
Lorenz Meier
85eafa323a
Fix to RC param updates on IO
2013-08-22 10:43:19 +02:00
Lorenz Meier
309ea81460
Merged fmuv2_bringup
2013-08-21 15:19:19 +02:00
Lorenz Meier
5fbee23945
Added flag to disable RC evaluation onboard of IO (raw values still forwarded)
2013-08-21 11:17:29 +02:00
Lorenz Meier
e597f97982
Merged master
2013-08-18 12:04:07 +02:00
Lorenz Meier
061be7f7fe
Merged master
2013-08-17 20:30:52 +02:00
Lorenz Meier