8d66e1c0ef
Renamed shadowed variable
2016-01-29 09:06:33 +01:00
7b7da618b8
format and disable some warnx output
2016-01-29 09:02:34 +01:00
81ae5cbd0d
check for incoming D type telemetry packet (RX also connected to telemetry port)
2016-01-29 09:02:22 +01:00
b8a60f2501
pwm: change default_value for all boards from 1000 to 0
...
the value '1000' is not really magic, and it was resulting in sending
a single 1ms pulse on all IO channels for a brief instant on
startup. With some servos this led to the control surfaces being at
extremes (and straining) on startup. It may also contribute to making
ESC calibration harder on multi-rotors
In the worst case it could cause a IC motor with reverse throttle to
go full throttle on startup
A logic analyser shows the problem very clearly. Changing the
default_value fields to 0 from 1000 fixes the issue and no pulses are
generated until an explicit value suitable for the airframe is
provided via one of the many methods PWM output values can be
generated
Conflicts:
src/drivers/boards/px4fmu-v4/px4fmu_pwm_servo.c
src/lib/ecl
2016-01-29 08:57:20 +01:00
e6db5e2db1
set all outputs for firefly
2016-01-27 15:07:11 +01:00
1363e4aa8f
use 400Hz for motor outs in vtol configs, fixes #3609
2016-01-27 15:06:58 +01:00
f35e3335be
- only use takeoff strategy when in auto mode
...
- after jumped takeoff set previous vel setpoint such
that thrust setpoint is continuous
2016-01-27 11:47:41 +01:00
f2af8a5a5d
IO Firmware: Reduce unnecessary buffer space
2016-01-27 09:56:20 +01:00
b54a0308a7
IO: Do not allocate excessive UART buffers
2016-01-27 09:56:20 +01:00
ba169ce0b5
do not do jumped takeoff if already in air
2016-01-27 09:55:47 +01:00
3928924c43
RTL was broken by a recent change, revert
...
Revert "for multicopter landings make sure that the copter moves"
This reverts commit ad1058d3742bbfa9cbd16648aa2925fa1e618a55.
2016-01-26 15:53:52 +01:00
5ea5ecf32b
Limit manual yaw command properly. Fixes #3600
2016-01-26 14:08:43 +01:00
c9b1fb154d
hotfix:
...
multirotors shouldn't use tailsitter recovery code.
2016-01-26 13:29:53 +01:00
e11fff3011
Fix tests stack space
2016-01-26 12:58:17 +01:00
17c3aa3bac
MC att control: Slightly increase max yaw rate
2016-01-26 12:32:26 +01:00
fcbd717200
Switch POSIX sitl to EKF2 per default
2016-01-25 22:42:53 +01:00
6c13cef85e
Lister: Add missing uint16
2016-01-25 21:46:07 +01:00
4cb1f8a440
Updated matrix for euler wrap fix.
2016-01-25 21:23:11 +01:00
166f6e2e7a
posix sitl: bring the pxh back
2016-01-25 21:22:10 +01:00
6ce5e1be49
posix sitl: don't exit if a command fails
2016-01-25 19:03:48 +01:00
563460444a
ekf2: get the rad to deg conversion right
2016-01-25 19:03:16 +01:00
28754d3f58
ekf2: don't reset GPS position in every loop
2016-01-25 19:03:16 +01:00
9d5728b96f
FMU: Default to 900 us pulses
2016-01-25 12:08:26 +01:00
2e8accc6ff
FMU driver: Only init pins right before using the for PWM. Prevents accidental pulses
2016-01-25 12:08:08 +01:00
d32d533d11
FMUv4: Disable unused ADC channels
2016-01-25 12:07:38 +01:00
9cccc0ec76
GPS: Do initial zero value publication to avoid corner cases
2016-01-25 09:30:45 +01:00
6eac78d675
Sensors: Code style fix
2016-01-24 16:34:49 +01:00
081da8bb7f
Navigator: Force yaw pointing towards waypoint for all cases
2016-01-24 16:34:36 +01:00
737fe1fc7f
Always perform yaw SP generation, not only in multicopter mode
2016-01-24 16:30:21 +01:00
b2237ce525
Current scaling: Employ per-board defaults
2016-01-24 16:02:21 +01:00
4b55c5276e
px_romfs_pruner.py: fix indenting
2016-01-24 15:46:29 +01:00
443592136b
px_romfs_pruner.py: PEP8ify and whitespace
...
- Changed from 8 spaces indent back to 4 which I find appropriate for
Python.
- Fixed linelength to 80 chars.
2016-01-24 15:46:29 +01:00
6e26d1b8dc
px_romfs_pruner.py: ignore files starting with .
2016-01-24 15:46:29 +01:00
9169a585bf
Deprecate ROS target
2016-01-24 15:21:17 +01:00
a284b77c7b
gps advertise fix
2016-01-24 15:03:41 +01:00
06b496e257
Navigator: Only set acceptance radius based on navigation capabilities for fixed wing flight.
2016-01-24 14:08:41 +01:00
fb21654807
PX4 airframes: Fix XML parser
2016-01-24 13:22:45 +01:00
69d4b1b692
Fix config meta data
2016-01-24 13:22:25 +01:00
d96a17adfb
missed some name changes from sPort to frsky
2016-01-24 11:22:18 +01:00
cfc3af8374
update fmu-v4 cmake config
2016-01-24 11:22:18 +01:00
527fe4b374
remove sPort_telemetry directory
2016-01-24 11:22:18 +01:00
c81c34b147
add sPort telemetry handling into frsky_telemetry daemon
2016-01-24 11:22:18 +01:00
8f8b4485f1
change rcS to start frsky_telemetry daemon for FMUv4
2016-01-24 11:22:18 +01:00
29d759768e
clean up structure
2016-01-24 11:22:18 +01:00
42f9079683
move sPort_telemetry.c to src/drivers/frsky_telemetry and rename daemon
...
to frsky_telemetry
2016-01-24 11:22:18 +01:00
528e2826d5
run astyle
2016-01-24 11:22:18 +01:00
3b9ef1cef5
reduce reporting frequency for smartport sensors. reduces CPU load to
...
approx. 1%
2016-01-24 11:22:18 +01:00
4f55ae5306
add D type telemetry fallback to sPort_telemetry daemon
2016-01-24 11:22:18 +01:00
a402b3beeb
change frsky_telemetry default port to USART8 for pixracer
...
add a 50msec timeout to poll calls in sPort_telemetry to prevent hangs
2016-01-24 11:22:18 +01:00
8d089d95d4
change baro altitude scaling to 100 to match OpenTX "custom" altitude
...
mode
2016-01-24 11:22:18 +01:00
Holger Steinhaus