* feat(pps_capture): allow selecting GPS receiver by device ID
Add PPS_CAP_GPS_ID parameter to select which GPS receiver's data
is used for PPS timestamp correlation. Matches by device ID rather
than uORB instance index, which avoids dependence on instance ordering.
When set to 0 (default), uses the first available instance for
backward compatibility.
* docs(pps_capture): document PPS_CAP_GPS_ID for multi-GPS setups
* fix(pps_capture): use GPS_MAX_RECEIVERS constant and mark PPS_CAP_GPS_ID reboot-required
* boards: corvon 743v1 support (Docs and LED alignment)
This PR addresses #24769 by providing the required official documentation, while simultaneously aligning the board's LED semantics entirely with the PX4 standard.
Key Changes:
- Add complete corvon 743v1 hardware documentation and manufacturer link.
- Fix LED out-of-bounds bug and strictly align RGB states to Pixhawk standard (LED_BLUE=0, LED_RED=1, LED_GREEN=3).
- Update bootloader pin config (hw_config.h) to use red LED for boot/error, and update pre-built bootloader.bin.
* Prettier and file reduce
* docs: address reviewer feedback & board ID fix
* Apply suggestion from @hamishwillee
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* docs: resolve final reviewer feedback (PPM, Debug Port, Manufacturer List)
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
The flow output table shows forward movement producing +Y flow and
rightward movement producing -X flow, which confuses users whose sensors
have X-forward/Y-right coordinate systems. Add an info note explaining
that integrated flow values are angular rotations (radians) about the
body axes using the right-hand convention, which is why the axes are
cross-coupled with translational motion.
Add a scalable .deb packaging framework for VOXL2, built on the
existing cmake/package.cmake CPack infrastructure. The framework
handles multi-processor boards by having the POSIX (_default) build
own the .deb and pull in the companion SLPI build's artifacts.
Board-specific files:
- cmake/package.cmake: CPack variable overrides (name, deps, version)
- cmake/install.cmake: install() rules for all .deb contents
- debian/postinst: px4-* symlinks, DSP signature, directory setup
- debian/prerm: service stop, symlink cleanup
- debian/voxl-px4.service: systemd unit (after sscrpcd)
Infrastructure changes:
- cmake/package.cmake: hook for board-specific CPack overrides
- platforms/posix/CMakeLists.txt: hook for board install.cmake
- Makefile: %_deb pattern rule (build _default, then cpack -G DEB)
- CI: auto-discover _deb targets, collect .deb artifacts, upload
to GitHub Releases
Future boards: add cmake/package.cmake + cmake/install.cmake and
CI discovers it automatically. No new file formats or tools needed.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* sensors: add per-receiver GPS delay parameters
Add SENS_GPS{0,1}_DELAY params to vehicle_gps_position, following the
same device-ID matching pattern used for antenna offsets. Each receiver
can now have its own measurement delay relative to the IMU.
The delay is applied to timestamp_sample before blending. When PPS time
correction is active it takes priority over the parameter-based delay.
When a GPS driver already provides its own timestamp_sample the
per-receiver delay is not applied on top of it.
* fix(ekf2): remove EKF2_GPS_DELAY and perform param transation
* fix(param_translation): fix GPS param migration return values
Add missing return for EKF2_GPS_POS_Z and remove incorrect return for
EKF2_GPS_DELAY (1-to-many migration should not return PARAM_MODIFIED).
* fix(sensors,ekf2): rename pps_compensation and clarify delay default
* fix(ekf2): account for SENS_GPS*_DELAY in observation buffer sizing
* fix(docs): migrate EKF2_GPS_DELAY param
