This fixes the case where we sometimes switch to altitude control
instead of position control when RC is regained.
What happens is that we detect that the pilot wants to take over control
right when RC comes back. This means that we try to go in position
control in main_state_transition, however, we are already in position
control because we come back from the failsafe state. The result of
main_state_transition is then TRANSITION_NOT_CHANGED, and therefore we
"fall back" to altitude control even though being already in position
control would have been fine.
This fix checks the return result of main_state_transition correctly and
only reacts to TRANSITION_CHANGED and TRANSITION_DENIED but ignores
TRANSITION_NOT_CHANGED.
By default we would leave the LAND failsafe as soon as a link comes
back. With this change, we switch to the LAND failsafe like a proper
mode change, immediately disabling the failsafe as such.
This is as the same that is done for RTL in fact.
This is not optimal but a workaround for the problem where we switch out
of failsafe right on landing and then discover takeoff again and start
looping through it again and again without ever disarming.
I think it was not the best idea to use errno as a global variable to
keep track of the error code. I saw the errno change from where it was
set to where it was actually used, maybe because part of it is called in
the receive thread and part in the regular update/send() thread.
To be safe, I just created a class variable instead.
- initial frequency peak tracking SNR increased from 10->15 db
- after initial detection the threshold decreases to SNR 5db
- gyro_fft large method refactored into smaller pieces
- sensors/vehicle_angular_velocity: dynamic notch FFT make sample rate
check a percentage and relax lower bound safety threshold
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
SDLOG_ALGORITHM for selecting the crypto algorithm
SDLOG_KEY for selecting the key in keystore to use with the algorithm.
for symmetric algorithms which are currently supported, this is just a free
slot to be used, the key is generated at logging start
SDLOG_EXCH_KEY for selecting an RSA2048 key for encrypting the SDLOG_KEY
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Generate a symmetric encryption key and a nonce value
- Use a public key in keystore to encrypt the symmteric key
- Write the encrypted key and the nonce value to disk into .ulgk, name matching with the encrypted log file
- use quick stream encryption to crypt the .ulg file contents
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Julian Oes