fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-06-27 22:20:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
32,589 Commits 852 Branches 161 Tags
6afa7e4368c4bb925b298f2f50aa3c50cdebdf71
Commit Graph

32589 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Daniel Agar 6afa7e4368 mavlink: HIL_SENSOR receiver respect fields_updated 
- keep in sync with the simulator module
 2020-06-18 09:54:00 -04:00
Daniel Agar be2081a2a2 wq:attitude_ctrl small stack increase 2020-06-18 01:36:29 -04:00
Daniel Agar f55ed0992c accel and gyro calibration refactor and cleanup 
- remove all remaining IOCTLs for accel and gyro and handle all calibration entirely in sensors module with parameters
 - sensor_accel and sensor_gyro are now always raw sensor data
 - calibration procedures no longer need to first clear existing values before starting
 - temperature calibration (TC) remove all scale (SCL) parameters
    - gyro and baro scale are completely unused
    - regular accel calibration scale can be used (CAL_ACC*_xSCALE) instead of TC scale
 2020-06-17 22:50:09 -04:00
Matthias Grob 588d551098 mc_pos_control_params: set the ground slow down speed to the default maximum speed 
This results in no change with defaults but a slow down to 10m/s if the maxiumum speed is set higher than that.
 2020-06-17 11:47:41 -04:00
Matthias Grob bcd771d832 Update ecl and adapt to new AlphaFilter location 2020-06-17 09:29:35 -04:00
hanyang2013212 4209101333 Update uuv_att_control.cpp 
Modified the thruster value to be accessed from attitude setpoint message instead of parameters
 2020-06-16 19:27:54 -04:00
TSC21 24ae8f601d mavsdk_tests: add iris_dual_gps to the test pipeline 2020-06-16 13:03:44 +01:00
TSC21 28c4446eae init.d-posix: if750a: add GPS blending 2020-06-16 09:57:05 +01:00
TSC21 6add0fff7f add iris_dual_gps config and the possibility of testing GPS blending through simulation 2020-06-16 09:57:05 +01:00
JaeyoungLim 39b803a9dc Remove gps noise multiplier parameter (#15108) 
This removes the gps noise multiplier parameter that can be set on the firmware side
 2020-06-15 22:32:32 +02:00
Daniel Agar 6c78c62d9d BMI088: accel get max rate from PX4Accelerometer 2020-06-15 10:19:14 -04:00
Daniel Agar e819f99064 new Bosch BMI055 IMU driver using FIFOs and DRDY 
- accel & gyro FIFOs enabled
 - FIFO watermark on data ready interrupt
 - sensor side filtering completely disabled
 - gyro now respects `IMU_GYRO_RATEMAX` (up to 2 kHz)
 - saves a few % cpu (at default rate)
 2020-06-15 10:19:14 -04:00
Daniel Agar daf75e40eb drivers/imu/invensense: simplify gyro range configuration 2020-06-15 09:36:21 -04:00
Matthias Grob 1efc8c27eb FlightTaskAuto: check yawspeed saturation before constraining 
to avoid possible numerical float equality issues.
 2020-06-15 10:40:48 +02:00
bresch 12449c23c5 FlightTaskAuto: add missing wrap_pi and do not override yaw_sp_aligned 2020-06-15 10:40:48 +02:00
bresch 7a401e5ca3 FlightTaskAuto: Create artificial yaw speed sp for feedforward 2020-06-15 10:40:48 +02:00
Matthias Grob c165327c9f INA226: revise read() and collect() error handling 
to allow negative currents and simplify unnecessary redundancy.
 2020-06-15 10:26:10 +02:00
Matthias Grob da9feeb699 INA226: refactor spacing and return codes 2020-06-15 10:26:10 +02:00
dino d98cf2f719 Fixe for wrong perf counter increment in ina226 driver 2020-06-15 10:26:10 +02:00
Jonathan Hahn e6bec31890 add GNU screen to NUTTX dependencies in ubuntu setup 2020-06-15 10:16:08 +02:00
JaeyoungLim 58ca389634 Fix tiltrotor range to use normalized actuator inputs in SITL (#14751) 
This adds fixes to use the normalized actuator setpoints for simulating tiltrotor in sitl
 2020-06-15 08:51:26 +02:00
PX4 BuildBot eee87cd605 Update submodule ecl to latest Mon Jun 15 00:38:18 UTC 2020 
- ecl in PX4/Firmware (adc733932566f0198a8892c3cebe9e5c8345e391): https://github.com/PX4/ecl/commit/38cbd1a18211f1702b403915ab37d5e22626432f
    - ecl current upstream: https://github.com/PX4/ecl/commit/e835bc34c4c84b526941db418f5c9d00d35cbe12
    - Changes: https://github.com/PX4/ecl/compare/38cbd1a18211f1702b403915ab37d5e22626432f...e835bc34c4c84b526941db418f5c9d00d35cbe12

    e835bc3 2020-06-06 Kamil Ritz - remove inline modifier
74780aa 2020-06-06 Kamil Ritz - Refactor gps fusion commencing
 2020-06-14 22:14:14 -04:00
PX4 BuildBot f89dac03f3 Update submodule matrix to latest Sun Jun 14 12:39:39 UTC 2020 
- matrix in PX4/Firmware (18f14ebefad29873ddeef6396c7c3a728c90b996): https://github.com/PX4/Matrix/commit/2bee0d078cb6b0e6205d17145899ccbb15dbe380
    - matrix current upstream: https://github.com/PX4/Matrix/commit/674bd99f3b9284e1088d100d765b3a09cf0c192f
    - Changes: https://github.com/PX4/Matrix/compare/2bee0d078cb6b0e6205d17145899ccbb15dbe380...674bd99f3b9284e1088d100d765b3a09cf0c192f

    674bd99 2020-06-11 kamilritz - Add operator* and operator/ for slice with type
38b3acc 2020-06-11 Nicolas MARTIN - fix conjugate_inversed comment
 2020-06-14 11:18:00 -04:00
CUAVcaijie 1c02c37955 boards/cuav/x7pro: RC03 RM3100 moved from SPI1 to SPI2 2020-06-11 21:38:55 -04:00
CUAVcaijie dee56e78aa boards/cuav/x7pro: fix X7 LED SAFETY configuration 
* keep the naming identical to the pinout
 2020-06-11 21:32:53 -04:00
Beat Küng ab060cdab0 bmi088 accel: use IMU_GYRO_RATEMAX to configure sampling rate (with 800 max) 
Primarily for logging the fifo topic @400 Hz.
 2020-06-11 12:25:13 -04:00
Beat Küng 16323256bc gyro calibration: add median filter to motion detection 
The bmi088 has a bit more noise and tends to trigger it.
This improves reobustness against noise, and increases the threshold
slightly.
 2020-06-11 12:25:13 -04:00
Daniel Agar 13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
CUAVcaijie b6ec00c079 boards/cuav/x7pro: Fix HIPOWER enabled state 2020-06-11 12:05:37 -04:00
CUAVcaijie 9270b26c63 IO's RGB status light is modified to PWM breathing light 2020-06-11 12:02:49 -04:00
CUAVcaijie 67554acf9e x7 add led_pwm driver 2020-06-11 12:02:49 -04:00
CUAVcaijie 8aed6b2240 STM32H7 adds led_pwm driver 2020-06-11 12:02:49 -04:00
Julian Oes be4e253e63 mavsdk_tests: bump library from v0.24.0 to v0.27.0 2020-06-11 15:18:57 +02:00
Ricardo Marques a4927606ed Fix SENS_EN_SF1XX max value 
Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com>
 2020-06-10 14:37:23 -04:00
Matthias Grob 7ff25373e4 powerCheck: add power redundancy check 
A parameter spcifies what the redundancy level for 5V rail supply
needs to be and a check makes sure that it's available before
taking off such that the user is aware of a broken or disconnected
redundant power module.
 2020-06-10 10:13:51 -04:00
CUAVcaijie 37fb4dbb64 Enable safety button 2020-06-10 09:14:25 -04:00
Mirko Denecke 10afcdce2e Hex/Proficnc Cube Yellow: align firmware location in flash memory to be able to use the default bootloader 2020-06-10 09:08:11 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
PX4 BuildBot 13d983d305 Update submodule ecl to latest Tue Jun 9 20:35:44 UTC 2020 
- ecl in PX4/Firmware (af11fa456d7282e324d662a452c71ae85ee59d9b): https://github.com/PX4/ecl/commit/b3dc06d0cb572931000705ac04807eeae5e2401a
    - ecl current upstream: https://github.com/PX4/ecl/commit/38cbd1a18211f1702b403915ab37d5e22626432f
    - Changes: https://github.com/PX4/ecl/compare/b3dc06d0cb572931000705ac04807eeae5e2401a...38cbd1a18211f1702b403915ab37d5e22626432f

    38cbd1a 2020-06-09 Matthias Grob - AlphaFilter: prevent setParameters division by zero
b7d54b5 2020-06-04 RomanBapst - gps: fixed filter initialization bug around gps - do not gps reference altitude to zero in case gps checks pass before the filter initialized - reset the filtered gps position and position derivative filters in case we are in air or there is movement on the ground
8f533cb 2020-06-03 bresch - terrain_estimator: fix sensor aid selection
821e1fa 2020-06-03 bresch - terrain_estimator: add unit tests
aa96fa6 2020-06-03 bresch - Random style fixes in the code
5d6a72e 2020-06-03 bresch - sensor_simulator: add possibility to set GPS position rate
 2020-06-09 17:21:49 -04:00
PX4 BuildBot 3f995efae9 Update submodule sitl_gazebo to latest Tue Jun 9 20:35:27 UTC 2020 
- sitl_gazebo in PX4/Firmware (0fcb873636): https://github.com/PX4/sitl_gazebo/commit/3ba325b00f5e9c7a0645c6af3937f394dc806c9f
    - sitl_gazebo current upstream: https://github.com/PX4/sitl_gazebo/commit/e2bf962b5e46b89093696338794a201c7fc990ba
    - Changes: https://github.com/PX4/sitl_gazebo/compare/3ba325b00f5e9c7a0645c6af3937f394dc806c9f...e2bf962b5e46b89093696338794a201c7fc990ba

    e2bf962 2020-06-08 JaeyoungLim - Fix typhoon h480 internals (#512)
 2020-06-09 17:21:17 -04:00
Daniel Agar b8dda62b4d Update submodule mavlink v2.0 to latest Tue Jun 9 20:35:34 UTC 2020 
- mavlink v2.0 in PX4/Firmware (febd2d855e4e25e38ff9222ccca7134f612ecb23): https://github.com/mavlink/c_library_v2/commit/5f1d5d8338ff15108bd11137fc6970282f369246
    - mavlink v2.0 current upstream: https://github.com/mavlink/c_library_v2/commit/f69d7331cae381b8886ec070abccb53d76d30173
    - Changes: https://github.com/mavlink/c_library_v2/compare/5f1d5d8338ff15108bd11137fc6970282f369246...f69d7331cae381b8886ec070abccb53d76d30173
 2020-06-09 17:20:56 -04:00
Beat Küng 0fcb873636 logger: add raw FIFO high-rate IMU logging profiles 
Minimum requirement to use: set IMU_GYRO_RATEMAX to 400.

Logging rate of a single topic: ~85 KB/s. If multiple should be logged,
a really good SD card has to be used.
 2020-06-09 09:58:15 -04:00
Beat Küng 590b65ebfb Revert "kakutef7 spi: disable IMU drdy" 
This reverts commit 2069576a6e.

PR #15004 fixed the problem.
 2020-06-09 09:11:51 -04:00
David Sidrane 82b87adfb3 px4_fmu-v6x:default phy is LAN8742 2020-06-09 08:14:22 +02:00
David Sidrane bcc505db3c Jenkinsfile-compile Change name to px4_fmu-v5x_p2_base_phy_LAN8742Ai 2020-06-09 08:12:44 +02:00
David Sidrane 4e014a0aed github:workflows Change name to px4_fmu-v5x_p2_base_phy_LAN8742Ai 2020-06-09 08:12:44 +02:00
David Sidrane 0bb8d7a065 px4_fmu-v5x p4 (-06) default to suporting LAN8742Ai 2020-06-09 08:12:44 +02:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar a83e75ee10 ROMFS: microsd prevent MacOS and Ubuntu trash and indexing files 2020-06-08 16:57:28 -04:00
Daniel Agar 5507c15bdc boards: move rgbled_pwm startup to appropriate boards 2020-06-08 16:49:46 -04:00