David Sidrane
683ac7e1f7
aerocore:Schedule work queue with higher priority as on master
...
was:CONFIG_SCHED_HPWORKPRIORITY=192
is:CONFIG_SCHED_HPWORKPRIORITY=249
2017-09-29 10:13:51 -04:00
David Sidrane
b3c614c573
aerocore nsh: Upstream NuttX removed setenv.sh
2017-09-29 10:13:51 -04:00
David Sidrane
7265523f40
aerocore nsh: Upstream NuttX defconfig changes
...
was:CONFIG_STM32_STM32F40XX is:CONFIG_STM32_STM32F4XXX
2017-09-29 10:13:51 -04:00
David Sidrane
7d76e3f987
aerocore nsh: Upstream NuttX defconfig changes
...
was:CONFIG_ARM_TOOLCHAIN_IAR is:CONFIG_ARCH_TOOLCHAIN_IAR
was:CONFIG_ARM_TOOLCHAIN_GNU is:CONFIG_ARCH_TOOLCHAIN_GNU
was:CONFIG_MUTEX_TYPES is:CONFIG_PTHREAD_MUTEX_TYPES
2017-09-29 10:13:51 -04:00
David Sidrane
ff4ad00496
aerocore nsh Refreshed nuttx config for 7.19+
2017-09-29 10:13:51 -04:00
Beat Küng
83643a719a
nuttx config: increase CONFIG_NFILE_DESCRIPTORS from 53 to 54
...
This is needed when logger is logging to file and ulog streaming gets
activated.
2017-08-16 16:46:56 +02:00
Beat Küng
1be089cf0c
BBSRAM: add another partition and store the last ulog path
2017-07-07 17:06:48 +02:00
Beat Küng
d10848c129
aerocore NuttX defconfig: lower CONFIG_DEV_PIPE_SIZE to 70
...
This saves almost 2kb of RAM when using the mavlink shell. 70 matches the
size of the mavlink message. Since the pipe is blocking, a process writing
a lot of data will just wait, data will not be dropped.
The mavlink shell is the only process creating a pipe.
2017-03-10 11:29:09 +01:00
Beat Küng
1d93b1bce3
nuttx configs: increase CONFIG_NFILE_DESCRIPTORS from 51 to 53
...
this is needed due to the additional topics logged with the logger
2017-03-04 22:47:54 +08:00
David Sidrane
57581ddaac
aerocore Increased IRQ Stack Size
2017-01-27 15:01:52 +01:00
David Sidrane
2e235b9013
Changes to aerocore for upstream Nuttx
2016-12-21 08:34:21 +01:00
David Sidrane
3829871612
Removed unused NXFFS buys back 5792 bytes of FLASH
2016-05-14 11:22:52 +02:00
Daniel Agar
0b54bb99f9
NuttX quiet build
...
cmake combine NuttX copy and export
-NuttX wasn't recopying if it fails to compile
2016-04-17 16:02:28 -04:00
David Sidrane
e7a3674c1d
This is a temporary hot fix for lost data
2015-06-15 07:03:14 -10:00
Lorenz Meier
6d41b5d063
NuttX configs: Reduce excessive number of reserved FDs
2015-04-26 14:33:55 +02:00
Daniel Agar
c147424fe7
nuttx-configs fix code style
2015-03-19 23:49:36 +01:00
Lorenz Meier
f7ef6e1950
Fix stack sizes based on observed usage. Frees some more RAM
2015-03-03 17:28:14 +01:00
David Sidrane
17615b22a4
Insure that CONFIG_ARCH_BOARD_xxx is defined and to be consistent with Nuttx build place them in defconfig files so that config.h will have ONFIG_ARCH_BOARD_xxx defined
2015-02-17 23:27:34 +01:00
Lorenz Meier
4b27e4029d
Disabled stack checking on aerocore
2015-01-21 15:32:38 +01:00
David Sidrane
517e1e8d48
Fixed permissions
2015-01-21 14:54:25 +01:00
David Sidrane
4b8feb03cf
Match the OS build's CONFIG_ARMV7M_STACKCHECK setting by using actual setting in the exported nuttx config.h file to control each board build setting of ENABLE_STACK_CHECKS in toolchain_gnu-arm-eabi.mk
2015-01-21 14:54:24 +01:00
Lorenz Meier
f1c5fcd8da
NuttX configs / build options: Do not warn about sign compare, as there are a bunch of non-standard signedness assumptions
2014-12-26 17:38:11 +01:00
Anton Babushkin
1525341cad
Disable CONFIG_ARCH_IRQPRIO in all NuttX configs
2014-08-14 13:12:02 +02:00
Ash Charles
e5508a1aa0
Add Gumstix AeroCore device
...
Based on the work of Andrew Smith [1], add board configuration and device
drivers to support the Gumstix AeroCore (previously Aerodroid) board [2]. The
AeroCore is an autopilot board based on a STM32F427 similar to the FMUv2.
[1] https://github.com/smithandrewc/Firmware
[2] https://store.gumstix.com/index.php/products/585/
Signed-off-by: Ash Charles <ashcharles@gmail.com >
2014-05-13 09:41:41 -07:00
David Sidrane