The data sheet for the F4, F7 indicate a maximum of 36 Mhz
in the 2.4-3.3 volt Soc operating range. This change sets
the clock based on the STM32_PCLK2_FREQUENCY.
voltage3V3_v - the sensor 3.3V voltage rail
v3v3_valid - the value of voltage3V3_v may be 0. This
field is a 1 when the HW provides voltage3V3_v
brick_valid - is now a bit mask. A 1 in the postion inticate the
Power controler HW has a valid supply voltage
present (in V window) on that priority
(channel V1..Vn).
The mapping is formed by 1<<battery_status.msg.priority
or using the manifest constanst BRICKn_VALID_MASK
usb_vaild - is now indicated from the Power controler HW or
the usb_connected if Power controler is
not present.
brick_valid == 0 and usb_vaild = 1 implies the FMU is powered
from USB only
brick_valid != 0 and usb_vaild = 1 implies the FMU is powered
from the higest priority brick, providing a 1 bit in brick_valid
and from USB
This PR is preliminary ground work for FMUv5.
PX4 does not use the NuttX adc driver. But used the same format
for the data returned by the nuttx ADC driver.
There was a fixme:in src/platforms/px4_adc.h "this needs to be
a px4_adc_msg_s type" With this PR the need for
src/platforms/px4_adc.h goes away as the driver drv_adc.h now
describes the px4_adc_msg_t.
Use ADC_SCALED_V5_SENSE as apposed to legasy ADC_5V_RAIL_SENSE to populate
voltage5V_v
Then Scale the DN based on an overridable ADC_V5_V_FULL_SCALE value
These functions used vprintf which is not available on all platforms.
They also do not enable line and file debug output.
Changed to macros that preserve the output format. Uses new macro that
can be used to implement per object, runtime selectable logging
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
The existing orb_advert_t use thoughout the code sometimes tries
to treat it as a file descriptor and there are checks for < 0
and ::close calls on orb_advert_t types which is an invalid use
of an object pointer, which is what orb_advert_t really is.
Initially I had changed the -1 initializations to 0 but it was
suggested that this should be nullptr. That was a good recommendation
but the definition of orb_advert_t had to change to void * because
you cannot initialize a uintptr_t as nullptr.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Julian Oes