55d18949bc
Commander: support finer granularity of data llink loss and RC loss actions
2016-04-25 08:44:51 +02:00
a302e79bb6
param_shmem: be less chatty, printf cleanup
2016-04-24 20:03:10 +02:00
a1e90f4aa7
Better loiter handling
2016-04-24 20:03:05 +02:00
92afa7c258
mag_calibration: bugfix for device ID of mag
...
The device ID is defined as a uint32_t in the driver and topic but
stored as a int32_t param. It is therefore sufficient if the device ID
is not 0 in order to be valid.
2016-04-24 17:07:37 +02:00
588133e85d
Commander: Only change flight mode immediately if GCS requested it
2016-04-24 12:10:23 +02:00
2244ff167f
Navigator: execute on reposition commands
2016-04-24 11:54:20 +02:00
711053fd76
Commander: Switch flight mode so reposition commands can get applied
2016-04-23 20:12:27 +02:00
05aae9410c
Navigator: Handle reposition commands. Untested
2016-04-23 20:12:11 +02:00
c99ff66f75
Support disarming fixed wing if landed
2016-04-23 18:27:18 +02:00
1ecfaff6ea
Fix up power consumption estimation
2016-04-23 17:51:24 +02:00
4beca408b9
Fix Jenkins build error
2016-04-23 16:59:40 +02:00
25f327c4ac
Set RSSI to zero if we loose signal
2016-04-23 16:33:25 +02:00
82d51c5d17
Support more failsafe actions on data link and RC loss
2016-04-23 16:31:03 +02:00
b402cd9336
Battery: Fix code style
2016-04-23 15:51:44 +02:00
41c1e56075
FW stabalized mode properly initialize att_sp
2016-04-23 15:50:43 +02:00
f3ec95c3b2
ekf2_replay: Add missing GPS height data
2016-04-23 15:50:01 +02:00
8955fdc0e1
Commander: Decouple land detection states
2016-04-23 15:47:59 +02:00
ba817c7e45
Battery handling: Make critical state accessible
2016-04-23 15:47:20 +02:00
268b2e3546
Improve yaw behaviour in RTL
2016-04-23 15:47:00 +02:00
50433c5eee
Commander: Better RTL output
2016-04-23 15:12:20 +02:00
36e2bdf876
Commander: Support battery failsafe
2016-04-23 14:52:37 +02:00
5b897e095a
Generalize RTL handling
2016-04-23 14:52:30 +02:00
a49ba1a383
Sensors: Code style
2016-04-23 14:45:12 +02:00
19f2a7bff0
Only publish battery if we can measure something, initialize battery topic in commander correctly
2016-04-23 14:29:25 +02:00
4b0f1a6fb1
Battery lib: Fix interfaces and params
2016-04-23 14:25:21 +02:00
0733651d01
Simulator: Fix battery interface
2016-04-23 14:25:01 +02:00
803880a9f8
MAVLink: Fix current reporting
2016-04-23 14:24:36 +02:00
1b7319d2e5
adding the position control mode change for accel control back to the commander
2016-04-22 10:31:52 +02:00
95faba391a
accel control in pos controller
2016-04-22 10:31:52 +02:00
ce810542e2
simple NED acceleration control interface
2016-04-22 10:31:52 +02:00
b797657694
remove the commented out WARN as it's no longer an issue
2016-04-22 10:30:19 +02:00
cb3c625ea4
Apply AStyle to fixup formating
2016-04-22 10:30:19 +02:00
edd17771b1
Quiet an annoying warning
2016-04-22 10:30:19 +02:00
ff800a4c97
MAVLink app: Save stack for file name handliling, log only when armed
2016-04-22 10:28:13 +02:00
851b5d02a9
Fix potential string overflow corner case
2016-04-22 09:36:07 +02:00
b046f93173
Better MAVLink app error reporting
2016-04-22 09:34:02 +02:00
4077616264
Significantly reduce stack size needed for calibration in commander
2016-04-22 09:03:57 +02:00
37bd291446
fix regression which broke rattitude mode
2016-04-22 08:40:40 +02:00
c2f88c78b4
Fix battery current integration issue
2016-04-21 21:32:18 +02:00
8e5091703c
commander: no message due to LED/buzzer not found
...
The LED init and Buzzer init messages were only annoying and not helpful
on Snapdragon and SITL. Therefore they are replaced with only developer
printfs.
2016-04-21 21:22:52 +02:00
8c246b3219
mavlink_receiver: only publish the distance measurement of the mavlink flow message on uORB if they are valid
...
On the snapdragon, optical flow is computed in a separate process and sent to the mainapp via mavlink. Distance measurements come from a range sensor and are already published on uORB.
Here we make sure that meaningless distance values in the mavlink optical flow message do not interfere with the ones from other sources.
2016-04-21 18:18:08 +02:00
835ee4d709
Commander: Better status feedback about power status
2016-04-21 10:36:14 +02:00
5569d5444b
Fix incorrect use of constant
2016-04-21 10:02:52 +02:00
3307c71e6d
Additional yaw handling on land
2016-04-21 09:32:33 +02:00
e2812e34f8
Restore yaw orientation on RTL descend
2016-04-21 09:32:33 +02:00
f5d3871b9c
Fix RTL vtol back transition
2016-04-21 09:32:33 +02:00
e42206fc61
use waypoint type for RTL descent phase
2016-04-21 09:32:33 +02:00
f224375641
VTOL: transition to MC before descent in RTL
2016-04-21 09:32:33 +02:00
771d753419
sdlog2: log ekf2 GPS and control status flags
2016-04-20 21:47:29 +02:00
631040b30b
ekf2: publish filter control mode status
2016-04-20 21:47:29 +02:00
Lorenz Meier