fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-23 16:33:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
40,531 Commits 852 Branches 161 Tags
554283655ccb4e0e12f4ece3502f22b044499d3b
Commit Graph
73 Commits
Author SHA1 Message Date
Daniel Agar 376201e64d boards: px4_fmu-v5/v5x init all I2C pins 2022-05-24 11:02:03 -04:00
David Sidrane c0facec889 cdc_acm_check:Prevent USB disconect on param save 
If the hardware support RESET lockout that has nArmed ANDed with VBUS
   vbus_sense may drop during a param save which uses
   BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE to prevent external resets
   while writing the params.  If we are not armed and nARMRED is low
   we are in such a lock out so ignore changes on VBUS_SENSE during this
   time.
 2022-02-21 10:56:41 +01:00
Jukka Laitinen 03c0a2d56c Fix some cmake / linker depenencies for boards 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-27 12:42:40 -05:00
Beat Küng 92769bd2b2 dshot: remove BOARD_DSHOT_MOTOR_ASSIGNMENT & handle timer channel gaps 2022-01-21 20:41:15 -05:00
Beat Küng ca6df035b4 px4/fmu-v5x: add arch_io_pins dependency (required in init.cpp) 2021-12-10 09:03:08 -05:00
Beat Küng 4a4acf7ead px4/fmu-v5x: add capture pins to list of pwm pins 2021-10-18 18:45:19 -04:00
Daniel Agar bbfaa4694c boards: cleanup serial RX DMA hrt_call_every 
- remove ts_to_abstime dependency
 2021-10-06 14:39:59 -04:00
Beat Küng c5c80e31b6 boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h 2021-09-08 16:10:24 -04:00
Beat Küng a8e75d174c boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS 2021-09-08 16:10:24 -04:00
Kirill Shilov e13884410b heater: added support of inverted IMU heat controller output 2021-07-20 10:37:53 -04:00
David Sidrane 05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
David Sidrane 62fd132047 boards:Use inttypes 
nxp_ucans32k146:Fix constant

spracing_h7extreme:Use inttypes
 2021-06-16 17:07:47 +02:00
David Sidrane 32e92ba817 Revert:Pull downs - bad levels cause motor spins 2021-06-01 15:18:47 -04:00
David Sidrane e87a6c755d px4_fmu-v5x:Add support for Revision 2 FMUM HW using ICM20649 not BMI088 2021-05-10 09:11:50 +02:00
David Sidrane 7dd57d55f6 px4_fmu-v5x: Initalize PWM as input with Pull Downs 2021-05-05 20:48:06 +02:00
dino 6d04a67b02 Moving define to microhal.h files, for each ST architecture. Correct channels were verified with ST_CUBE header files. For the H7 its a simplification for the current used H7x3. Other devices in that family expect the temperarture on channel 18. 
F1: channel 16
F3: channel 16
F4: channel 18
F7: channel 18
H7: channel 17, on STMf32Hx3
 2021-03-18 06:13:24 -07:00
dino 3c77ef7eb3 Fixed adc config, to read internal reference to get cpu temperature 2021-03-18 06:13:24 -07:00
Lorenz Meier 4c9b2c65b5 Support v5X build variants 
This adds support for the different implementation variants of the v5X standard.
 2021-02-14 11:17:28 +01:00
Lorenz Meier 80b8e6a48f v5X: Register board variants 
This is needed to properly identify new variants.
 2021-02-11 22:14:02 +01:00
David Sidrane ed996e2dd1 fmu-v5x:Add net monitoring an DHCP 
px4_fmu-v5x:Use Bin Net settigns
 2021-01-31 14:42:09 +01:00
Beat Küng e2337a34eb system_power: add comp_5v_valid and can1_gps1_5v_valid 
And fill it in from the v5x GPIO expander.
 2021-01-15 10:57:20 -05:00
Beat Küng 88fe047556 px4/v5x: enable mcp23009 GPIO driver 2021-01-15 10:57:20 -05:00
Beat Küng 26e8c231b0 v5x,v6x: move mtd_caldata after mtd_id partition 
to avoid losing factory calibration params on existing setups
 2021-01-15 10:57:20 -05:00
Beat Küng 9f5dee2ecf v5x/v6x: update IMU sensors (remove ISM330DLC) 2021-01-12 09:55:59 -05:00
David Sidrane a60df85a09 px4_fmu-v5x:Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 1b9ab2a3e2 px4_fmu-v5x:Manifest Update Adde Rev 1 HW and fix VER 1 
VER is on BASE
   REV is on FMU
     ver|rev
     bas|fmu
    {0x0000, hw_mft_list_v0500, ...(hw_mft_list_v0500)},
    {0x0001, hw_mft_list_v0501, ...(hw_mft_list_v0501)}, <-- was wrong

    This falsly selected the NO I/O version
 2020-12-02 19:56:14 -05:00
Beat Küng f927cacd9c v5x: enable eeprom storage on IMU board 2020-10-12 15:22:26 +02:00
Beat Küng 274ccaf57c system: include shutdown lock to BOARD_INDICATE_ARMED_STATE 
BOARD_INDICATE_ARMED_STATE was only set during arming, so an external
component might have reset the board during param save, leading to param
loss.

This extends the API to trigger the arming state also while the shutdown
lock is taken.
 2020-10-09 08:23:47 +02:00
David Sidrane acea295d5a px4_fmu-v5x Updates for NuttX 9.1.0- 
px4_fmu-v5x: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
Beat Küng ca189fefb7 v5x: use board-specific camera capture pin PI0 2020-08-04 13:37:40 +02:00
Daniel Agar 13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
David Sidrane 04db5391fc px4_fmu-v5x:Fix PG11 assignment 2020-05-23 11:46:00 -04:00
David Sidrane b2153c7f2f px4_fmu-v5x:PG6 is free GPIO 2020-05-23 11:46:00 -04:00
David Sidrane 7f84ed57dd px4_fmu-v5x:Using SE050 not A71CH 2020-05-23 11:46:00 -04:00
David Sidrane 637578b8be px4_fmu-v5x:Correct trace connector description 2020-05-23 11:46:00 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426 boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
Beat Küng 985bb2adc9 refactor bmp388: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agar bd16c2b4f6 px4_fmu-v5x: add board_dma_map.h and enable SPI{1,2,3} DMA 2020-03-11 22:08:37 -04:00
Beat Küng 335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00
Beat Küng b54e5a1c23 param: automatically update calibration ID params on import 
This avoids the need for recalibration, and also cleans up other driver
ID's (merge separate accel/gyro).

The SPI address was previously set to a board-specific (arbitrary) value,
and is now set to 0. This will allow extending for multiple sensors of the
same type on the same bus.
 2020-03-10 10:11:43 -04:00
Beat Küng 1851665fab boards: add new spi+i2c config 
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.

The configuration in board_config.h can be removed after all drivers are
updated.
 2020-03-10 10:11:43 -04:00
David Sidrane ee220a5086 px4_fmuv5x:Update manifest for USB not present 2020-03-02 19:59:36 -05:00
Beat Küng 40898ba237 px4/fmu-v5x: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng 62b4f3487a io timer: remove some fields from io_timers_t and split out channel indexes 
- reduces amount of board configuration required
- removes the cyclic dependency between io_timers_t and timer_io_channels_t

Fixes a bug in the fmuk66-v3 config: the 2. timer has 3 channels associated
not 2.
Fixes a bug in the modelai config: the 2. timer has 4 channels associated.
 2020-02-13 03:49:16 -08:00
David Sidrane 5bb82a9f93 px4_fmu-v5x:GPIO_VDD_5V_{HIPOWER|PERIPH}_nOC remove Pull up - OC have series 47K 2019-12-17 18:33:20 -08:00
David Sidrane feaa657172 px4_fmu-v5x:SE050 Assert Reset on board_init, and release in appinit 2019-12-03 16:16:49 -05:00
David Sidrane ea69fde02a px4_fmu-v5x:Add SPI6_nRESET_EXTERNAL1 2019-12-03 16:16:49 -05:00